Hoppe
Hoppe 805-004 -Replacement Handle- Hoppe Door Handle Set - Hurd Swinging Door
No Longer available to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-004 -Replacement Handle- Hoppe Door Handle Set - Hurd Swinging Door Discontinued Product. What we have in stock is all that is available. Sold as is, no returns all sales final on this product.
$ 0.00
Hoppe S3004 Hoppe Handle Set Screw 6M x 12 mm 304SS
Part Number: S3004 - Sold Individually Hoppe Handle Set Screw Size: 6M x 12 mm 304SS
$ 6.00
Hoppe 829 - Hoppe Split Shaft
Part Number: 829 Hoppe Split Shaft only screws sold separately (See Part Number: 840-031 Set Screws or S3004 - metric 6-10) Shaft Size Order By Length: 3 15/16 inch ( 5/16 inch x 3 15/16 inch or 8 mm x 100 mm) For Doors Smaller 1 3/4 inch thick Can be used as a replacement split shaft for old GU handle sets 4 21/64 inch (5/16 inch x 4 21/64 inch or 8mm x 110 mm) For Doors Smaller than 1 3/8 inch thick 4 11/16 inch (5/16 inch x 4 11/16 inch or 8 mm x 120 mm) For 1 3/4 Thick Doors Commonly used on Hurd and Truth hardware 5 1/2 inch (5/16 inch x 5 1/2 inch or 8 mm x 140mm) For 2 1/4" thick doors 6 1/4 inch (5/16 inch x 6 1/4 inch or 8 mm x 160 mm) used with the 1" Hoppe Handle extension part # 828 sold separately Commonly used on Hurd and Truth hardware that has extension 828 See figure F in drawing for correct split shaft spindle position installation. Associated Parts Sold Separately: 6 1/4 is used with the 1" Hoppe Handle extension part # 828 Part Number: 840-031 Set Screws pack Part number S3004 - metric 6-10 screws
$ 25.00
Hoppe S4104 Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob
Part Number S4104 Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions Special order item no returns. Please expect a lead time of 1-4 weeks. Related Parts Sold Separately: Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4106 - Plastic Insert Part Number S4107 - Set Screw
$ 10.00
Hoppe 827 - Hoppe Back Plate Bushing
Part Number 827 - SOLD Individually Hoppe Backplate Bushing - (handle set or other parts not included) This Hoppe Backplate Bushing is for Hoppe Swinging Patio Doors System ONLY. Color: Clear Gold Opaque HANDLE BUSHING HFW F12 BACKPLATE MANUFACTURER: A/35/14 914 RL 750 16S 85 Used on Hurd handle set from 2004 and prior - See picture to match your handle set to correct bushing kit for Hurd DoorsThis Hoppe Backplate Bushing is for Swinging Patio Doors System ONLY.
$ 6.00
Hoppe S4102 Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Doors
Part Number S4102 Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below. Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used. Sizing: For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart For Doors: 2 1/8 inch to 3 inch Doors - see chart Related Parts Sold Separately: Part Number S4103 - Hoppe Short Cylinder Insert Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4107 - Set Screw For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder see part number Trouble shooting: If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.
$ 180.00
Hoppe 805-012- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-012- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Bright Brass NO SCREWS Included Discontinued Product. What we have in stock is all that is available. No returns all sales final.
$ 0.00
Hoppe S4106 CES Hoppe Plastic Insert For Cylinder with Crescent Knob
Part Number S4106 CES Plastic Insert For Cylinder with Crescent Knob Special order item no returns. Please expect a lead time of 1-4 weeks. Related Parts Sold Separately: Part Number S4104 - Ring Wrench Removal Tool Part Number S4105 - 2 MM Wrench
$ 10.00
Hoppe S4105 Hoppe and CES 2mm Hex Wrench Cylinder with Crescent Knob
Part Number S4105 For Hoppe and CES 2mm Hex Wrench Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below. Special order item no returns. Please expect a lead time of 1-4 weeks. Related Parts Sold Separately: Part Number S4102 - Hoppe Full Cylinder Part Number S4103 - Hoppe Short Cylinder Insert part Number S4105 - Hex Wrench Part Number S4107 - Set Screw
$ 6.00
Hoppe 805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Bright Brass NO SCREWS Included Discontinued Product. What we have in stock is all that is available. No returns all sales final.
$ 27.00
Hoppe 805-006 - Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Once stock is gone to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-006 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door 3 exposed screw holes (no screws included) Discontinued Product Part- what we have in stock is all that is available. Sold as is, all sales final. M216N stamped on back of face plate
$ 37.00
Hoppe 805-005 - Thumb Turn for Lock Cylinder- Hoppe Door Handle Set - Hurd Swinging Door
No Longer available to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-005 - Thumb Turn Only - for Hoppe Door Handle Set - Hurd Swinging Door
$ 0.00