Part Number 810
Pin/Roller and Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors only!
(If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com)
Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.
Comes with: bottom extension with gear box attached and the top extension (choose your door height size).
The Hoppe #810 Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock.
Hoppe Roller Style will also replace the Old FUHR Roller style.
Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0.
This usually ships via UPS Ground.
Style Options:
Hoppe Gear Box Pin/Roller Style
Hoppe Gear Box Flipper/Tongue Style
Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.
Install Instructions (also see instructions in pictures):
Remove set screws on handle levers and remove
remove three mounting screws on faceplate estuation
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
No Longer available to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-004 -Replacement Handle- Hoppe Door Handle Set - Hurd Swinging Door
Discontinued Product. What we have in stock is all that is available. Sold as is, no returns all sales final on this product.
Part Number S4104
Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob
To convert cylinder from 90 degree to 360 degree - see pictures for instructions
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4106 - Plastic Insert
Part Number S4107 - Set Screw
Part Number 827 - SOLD Individually
Hoppe Backplate Bushing - (handle set or other parts not included)
This Hoppe Backplate Bushing is for Hoppe Swinging Patio Doors System ONLY.
Color:
Clear
Gold
Opaque
HANDLE BUSHING HFW F12 BACKPLATE
MANUFACTURER: A/35/14 914 RL 750 16S 85
Used on Hurd handle set from 2004 and prior - See picture to match your handle set to correct bushing kit for Hurd DoorsThis Hoppe Backplate Bushing is for Swinging Patio Doors System ONLY.
Part Number S4102
Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel
Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below.
Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used.
Sizing:
For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart
For Doors: 2 1/8 inch to 3 inch Doors - see chart Related Parts Sold Separately:
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4107 - Set Screw
For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder see part number
Trouble shooting:
If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-012- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Part Number: 862
Construction Handle for GU, Hoppe and W&F Brands - Special Order NO Returns
During construction use the construction handle on your patio doors and save your nice handle sets from getting damaged.
Part Number S4106
CES Plastic Insert For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4105
For Hoppe and CES
2mm Hex Wrench Cylinder with Crescent Knob
To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
part Number S4105 - Hex Wrench
Part Number S4107 - Set Screw
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Once stock is gone to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-006 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
3 exposed screw holes (no screws included)
Discontinued Product Part- what we have in stock is all that is available. Sold as is, all sales final.
M216N stamped on back of face plate
