S4001 Hoppe 2-D Vertical Adjustable Door Hinge - Set Hinge
S4001 Hoppe 2-D Vertical Adjustable Door Hinge - Set Hinge 850-8755047
Columbus 2-D Hinge for Wood and Vinyl Products Screws not included
For other finishes see part # S4003 - replacement hinge interchangeable with #S4001
Free Standard Shipping on all parts orders!
Hoppe 2-D Adjustable Door Hinge for Wood and Vinyl Products - Set Hinge Vertical Adjustment (+/- 3 mm)
KTL Bright Alternative Shown in Picture
Other Finishes Available - Contact R&R for options, pricing and lead time
Settling of walls and floors can make door panels hard to open and close. The 2-D Adjustable Hinge allows easy adjustment of the door both horizontally (+/- 2 mm Guide Hinge Part # S4002) and vertically (+/- 3 mm Set Hinge Part # S4001) with just the turn of a screw. Each hinge is reversible and has maintenance free bearings.
There are two types of adjustable hinges for each door panel
A. Set hinge Part # S4001: One per panel. This has vertical adjustment (+/- 3 mm).
B, Guide Hinge Part # S4002: Minimum of two per panel. These hinges only have the horizontal adjustment (+/- 2 mm)
Normal hinge replacement has the set hinge. Using a Phillips screwdriver, first adjust the panel up or down by turning the screw marked "V" on the set hinge. When turning the screw in the direction of the arrow (counter clockwise) the other leaf will be pushed in the direction of the arrow. Automatic screwdrivers are NOT recommended. The speed of the gun may strip the heads of the screws are over adjusted.
When the vertical adjustment is turned clockwise, the non-adjustable leaf will move in the direction of the arrow. The vertical adjustment has 32 turns from its extremes, and the horizontal has 7 turns.
Adjust the horizontal by turning clockwise to increase margins, Turn counter clockwise to decrease the margins.
Known Parts # 122330200, 850-8755047, Pat Nr. 5.701.636
Known to work on: Semco Doors