Products

805-002 - Screw 50mm long - for Hoppe Door Handle Set - Hurd Swinging Door Once out of stock to order new handle set see part number S4100AC

Read more less

805-003 - Brass Screw 56mm long - for Hoppe Door Handle Set - Hurd Swinging Door Once out of stock to order new handle set see part number S4100AC

Read more less

Once stock is gone to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-006 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door 3 exposed screw holes (no screws included) Discontinued Product Part- what we have in stock is all that is available. Sold as is, all sales final.  M216N stamped on back of face plate

Read more less

once stock is gone to order new handle set see part number S4100AC   As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-007 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door. No exposed screw holes   Discontinued Product. What we have in stock is all that is available. Sold as is. No returns all sales final.    Stamped on back M216N

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-008 - Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Stamped on back M216N Discontinued Product. What we have in stock is all that is available. Sold as is, no returns all sales final  

Read more less

Once stock is gone to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-009 - Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Bright Brass  Discontinued Product. What we have in stock is all that is available. No returns all sales final. 

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Bright Brass NO SCREWS Included  Discontinued Product. What we have in stock is all that is available. No returns all sales final. 

Read more less

Once stock is gone to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available805-014- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door NO SCREWS Included  Discontinued Product. What we have in stock is all that is available. No returns all sales final. 

Read more less

Part Number 808 Frame Weather Strip for In Swinging Patio DoorsUsed on Side and Head Frame of Hurd In swinging French Patio DoorsComes in 4', 8' rolled, 12 foot - All Rolled  Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples 3 or 4 Q-lon per door are required if you want to replace all of this type of weather strip on your door:For a Single door you need QTY 3: QTY 2 at 8' pc for the sides and QTY 1 at 4' pc for the head.For a French door then you need QTY 2 at 8' pc for the sides and QTY 1 at 8' pc for the head and QTY 1 at 8' pc for the astragal in the middle. Customer will have to cut weather strip to length they need if they have a smaller door than 4' wide or 8' Tall ***SHIPPING NOTE***Product is shipped rolled in a box. If you want product shipped straight in a long box please email info@windowpartscenter.com for quote. (4 foot and 8 foot only we will not quote or ship out 12 foot pcs straight). 

Read more less

Part Number 810   Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors and others (If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com) Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.  Comes with: bottom extension with gear box attached and the top extension (choose your door height size). handing: Non handed latch is reversible. See pictures for directions on how to change latch handing   Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0. Style Options: Hoppe Gear Box Flipper/Tongue Style (For roller version see part number 810R and 820R) Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation For roller version see part number 810R and 820R The Hoppe #810R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Hoppe Roller Style will also replace the Old FUHR Roller style.  

Read more less

Part Number 810R  Hoppe Multipoint Automatic Roller Bottom Gear Box Extension HLS9000 CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different. Info@WindowPartsCenter.com Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.  Style: Roller Comes with: bottom extension with gear box attached (top extension SOLD separately see part number 820R for top extension these are for Hurd doors only. For other brand doors please email for worksheet to fill out for a quote)  The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Handing: Non handed latch is reversible. See video on how to change latch handing  Associated Parts Sold Separately: 820R - Hoppe Multipoint Automatic Roller TOP Extension HLS9000 813 -  Hoppe 3Pt Convert Auto Release Striker  833 -  Hoppe 3Pt Convertible Under plate  834 - Hoppe 3Pt Striker For Rollers 819 - Hoppe Multipoint Latch Plate  S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N Other Hoppe Multipoint and Single Point We Stock: 810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000 820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000 825 - Hoppe Single point Gear Box For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation 810R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number. 

Read more less

Part Number: 813 Hoppe 3Pt Convert Auto Release Striker  Finishes: Bright Brass or Sliver Nickel Replacement Parts for Hoppe Roller Multipoint Hardware used on swinging patio doors May have minor scuffs (as shown in pictures), etc. Parts come this way from the factory not considered a defect.  Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:   #833 - Hoppe 3Pt Convertible Under plate#834 - Hoppe 3Pt Striker For Rollers - Auto

Read more less