Peachtree Doors and Windows Replacement Parts and Hardware

43 products


  • Casement Awning Roto Handle Part number stamped on the bottom OP06-1520. Known Part Number: SS10012 and OP06-1520, 7-1877W, 7-1877AD, 7-1877BW, 7-1877DB

    SS10012 - Roto X Drive Handle for Casement and Awning Window Operator

    2 reviews

    438 in stock

    Part Number SS10012 Roto handle for X Drive operators for Casement and Awning Windows  Spline: 5/16"  Number stamped on bottom of handle known to be: #OP06-1520 In Stock Colors: Blue White, Bright White, Euro White, Beige (aka Almond), Clay, Coppertone, Dark Bronze, and Black.  Special Order Colors:  Oil Rubbed Bronze, Brushed Chrome and Bright Brass. You will be notified of lead time once you place your order. Discontinued Colors No Longer Available: Old Clay - We call it "Old Clay" as it is much darker then the current "Clay" color that Roto manufactures. See color cart. How to tell white colors apart: When you have the handle on white copy paper the Euro White has a yellow hue compared to the paper, Bright White matches the color of the copy paper and Blue White has a blue tint compared to the paper (see our color cart picture). (Note the above is from comparing brand new handles. The sun can fade, change and yellow colors over time, if your handles are older try to use a handle that does not get direct or intense sunlight).  Associated Parts Sold Separately:  SS10011 Roto North America X Drive Dual Arm Vinyl Casement Operator S1062 Roto X Drive and Pro Drive Awning Window Operator SS10017 Roto 15 Inch Face Mount Track Assembly with Track Shoe 0P05100 SS10013 - Roto North America Face Mount Bracket Assembly For Vinyl Awning  For Pro Drive Version of handle see part number S1066 SS10012 is longer  and different from our S1042. Both are used on Roto North America X Drive OP06 Operators See pictures  Known To Be Used on Following Window Brands and Many More: Roto Casement and Awning Operators X Drive Operators SuperSeal Vinyl Windows and Sierra Pacific Vinyl Windows (For SuperSeal and Sierra Pacific Vinyl windows they used Euro White and Beige (almond) for their two standard colors Minnkota Windows (their "clay" color was the old clay that has been discounted by the manufacture).   PeachTree (their "clay" color was the old clay that has been discounted by the manufacture). Euro Star Windows & Doors WeatherShield Visions 3000 & 3500 series windows. Factory windows from Visions was "tan" which matched the offering from  (WindowPartsCenter) listed as "beige"  crestline windows  RC Home Showcase Windows CM100 Series  Royal Window and Door Profiles royalplast Allsco 4700 PREMIUM Known Part Number: SS10012 and OP06-1520, 7-1877W, 7-1877AD, 7-1877BW, 7-1877DB

    438 in stock

    $ 15.00 - $ 50.00

  • 528 - Patio Door Screen Roller Pack Of 2 White / No Parts

    528 - Patio Door Screen Roller - pack of 2

    2 reviews

    150 in stock

    528 - Patio Door Replacement Screen Rollers  Part Number 528 - Replacement Screen Rollers - For Sliding Patio DoorsSize: See Photos for measurements. 2 Inch Long Overall  with 1" steel wheel-ball barring.Sold in: Set of 2 per pack 1 left and 1 right In Stock:  All Metal and White Low QTY: Sand and Bronze are low stock discontinued item. If you can add to cart we have it in stock still. Once gone the all metal is the direct replacement. Colored Adjustment  : White, Sand and Bronze - due to industry shortages we are unable to get these at this time. if you can add to cart we have them in stock if you can not add to cart they are not available to order and you will need to use the all metal style.  Screws: Replacement screws are sold separately Click Here to add to order If you want to replace both top and bottom rollers (total of 4 rollers) you will need to purchase QTY 2 packs. These parts are NEW- Marks found on roller adjustment are not defects. Rollers come pre packaged by the manufacturer. The “marks” you see on the sand and white adjustment are from the molds they use to make the parts and put them together. This parts were used on Hurd doors prior to 2006.Known Brands and Part Numbers: 025701, 025702, 025703, 23739000000, Hurd, Crestline, ParkVue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Peachtree Citadel Door Roller, Semco, Marvin and more. *Note to customer* there are a wide verity of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489    

    150 in stock

    $ 30.00 - $ 39.00

  • W&F Single Handle Bushing Kit Known Brands: W&F, Hurd, Jeldwen, Caradco, Peachtree

    701 W&F Single Handle Bushing Kit

    1 review

    39 in stock

    Part Number: 701 Our Bushing is Metal and has been modified to meet 85 degree rotation needed for older handle sets.You can order a new handle set which comes with a bushing kit that we still have in stock - Part # 852For handle set from 2004 and prior - See picture to match your handle set to correct bushing kitThis Bushing Kit is for Swinging Patio Doors Double Bore System ONLY.This will rebuild one interior or one exterior bushing.Two kits are needed to rebuild the complete door handle.For instructions on how to replace Bushing Kit please click on our Blog Link: Window Parts Center Blog Known Brands: W&F, Hurd, Jeldwen, Caradco, Peachtree known number stamped on some handles: pat no 4,671,089 Associated Parts Sold Sold Separately: W&F Interior and Exterior Replacement Handles W&F Door Handle Solid Shaft 870 - W&F Handle Extension

    39 in stock

    $ 39.00

  • 852 - Handle Set 6 Center To Bore Satin Nickel / Keyed Door Known to have been used on:  Replacement for Peachtree  Part # 06200031. and is a replacement handle set for Hurd, Jeldwen, Caradco "Hallmark Leverset",  Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829, 14421-WR.  Part # 06200031

    852 - Handle Set 6 inch Center to Center Bore

    22 in stock

    852 - Handle Set for 6" Center to Center Bore Colors: Bright Brass, Satin Nickel, Oil Rubbed Bronze*, Polished Chrome**, White** *Color AS IS: Oil Rubbed Bronze Type Finish (ORB). We will not accept returns on it for any reason for this finish. See finish note below. When you place your order for ORB you are agreeing to these terms for the ORB item. **Discontinued Colors: White and Polished Chrome. Once our stock is gone these colors will no longer be available  Fits 2 1/8" Crossbore on 6" and 6 3/32" bore Centers. Can also be used on doors with 1 3/4" Crossbore. The lockset includes removable posts.  2 3/8" Back Set Mounting Screw Holes 6 1/16" center to center Durable Finish Fits Right or Left Hand doors East to install with Phillips screwdriver Known to work on Weather Shield, and Hurd Swinging Patio doors and replacement for W&F handle set with 6" Center to Center Bores. Tools Required for Install: Philips Screwdriver and Slotted Screwdriver.  Detailed Installation Instructions Enclosed.  Keyed and Keyed Alike: Standard: All handle sets come random Keyed with 2 Keys. You can order as Keyed Alike for a small upcharge per handle.  For 2 or more handle sets you can  have all of the handle sets come keyed the same.  (Example if you order QTY 4 handle sets you will also need to add QTY 4 keyed alike to to your under found under accessory items)  Allow an addition 1-2 weeks for keyed alike handle sets to ship We CAN NOT rekey handle sets to any existing keys you the customer may have for your home, you the customer would need to hire a lock smith for that. Known to have been used on:  Replacement for Peachtree  Part # 06200031. and is a replacement handle set for Hurd, Jeldwen, Caradco "Hallmark Leverset", and replacement handle for 6" center to center bore handle  sets for Hurd, W&F Weather Sheild an more. Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829, 14421-WR.  Part # 06200031 *Finish Notice For Oil Rubbed Bronze Type:  Has NO manufacture warranty on finish wear.  This product is sold AS IS and we will not accept returns on it for any reason. **Warning** Do NOT use a power driver tool to attach the handle set face plate retaining screws.Thread damage can result and is NOT considered a product defect. No returns will be accepted if when inspected product has thread damage and not in new condition.  NOTE! 852 only works for  6 inch center to center bore and 6 1/16 inch center to center mounting screw holes, 2 1/8" standard double double bore with latch and dead bolt (see video and pictures with dimensions). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or  2 1/8" multipoint bore  and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )   *Additional Finish Manufacturer Warranty info:  Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.  Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.

    22 in stock

    $ 230.00 - $ 260.00

  • W&F Handle With 6" Center to Center Bore.  Hurd, Jeldwen, Caradco "Hallmark Leverset", Peachtree and more. Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829,

    1200 Series Handle Set 6 inch Center to Center Bore (W&F Handle) - Discontinued See Details for replacement option

    Out of stock

    1200 series Handle Set 6" Center to Center Bore (W&F Handle) Discontinued No longer Available once our AS IS stock is gone  Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore Condition:  As Is - New product that is unused.  Either: discontinued item and only what we have in stock is available, old stock, a customer return, vendor sample, or came in from the factory with finish flaws. May or may not have finish flaws or scratch’s.  In some instances, these items are repackaged. Not available in all colors or handing.  All sales final, No returns. If you can add to cart it is in stock. Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1). Part number 852 is the replacement style for the 6” center to center double bore  backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below).    W&F Replacement Parts Sold Sold Separately: W&F Interior and Exterior Replacement Handles W&F Door Handle Solid Shaft 870 - W&F Handle Extension 701 Bushing Kit NOTE! 852 only works for  6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or  2 1/8" multipoint bore  and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )     *Additional Finish Manufacturer Warranty info:  Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.  Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.

    Out of stock

    $ 0.00

  • Replacement 3 1/2" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators Known part # 139, 37-137

    139 Handle Roto Crank - 3 1/2" with 11/32" Spline

    109 in stock

    Part Number: 139 3 1/2 inch with 11/32 Inch Spline Replacement 3" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators Truth Handle - Roto - Replacement Parts for Awning and Casement Windows operators.Colors: Bronze, New Goldtone, White, Beige, Brass, Goldtone, Clay, Aluminum, Chestnut Bronze, Medium Bronze, Brushed copper Nickel, Off-White, Black, Cocoa Brown, Blue White (aka Bright White), Tuscan Bronze, Oil Rubbed Bronze, Off White (aka Euro white) Special Order Colors:  Special order colors or Pre-order colors are non returnable and can have up to a minimum 3 week lead time. Large QTY orders of 50 or more will also be considered special order none returnable. ** Please note: That the Short Handle Roto Crank has been discontinued by the manufacturer. Once our stock is depleted we will ship out the longer version of the Roto Crank Handle that will work on your windows. Known to have been used on many window Brands: Biltbest, Crestline, Caradco, Peachtree, Vetter, Oldach, Windsor, Sliver Line and Crank Handle standard Hurd used on  casement and awnings  manufactured pre February 1998.  Known Part Numbers: 139, 45054 31, HCSE29  

    109 in stock

    $ 20.00 - $ 150.00

  • S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock. Color Bronze. Known to have been used on: Crestline, Vetter and Peachtree Windows. Known part number stamped on back: 45428 Truth, Replacement version for locks stamped with 21328A

    S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock

    14 in stock

    Part Number: S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock Color: White New Goldtone and Bronze  (Beige is also available for special order please email for quote) What's Included: Each lock is Sold complete with: 1 lock, 1 Left Keeper, 1 Right keeper and color matching mounting screws for lock an keeper. (so you can use on either left hand or right hand operating casement windows) Dimensions: 2 1/4 Inch Wide x 2 3/4" Tall x  3/8 Inch deep at 1st step and 15/16 inch deep and 2nd step Screw Hole Spacing: 2 5/16 Inch Center to Center  HomeGard Sash Locks are a perfect low-profile lock option for windows with smaller side stops. Featuring .625" pull-in, HomeGard locks offer a strong detent which consistently provides a more secure feel during lock up. HomeGard locks can withstand negative air pressure of 275 lbs. per lock. Known to have been used on: Crestline, Vetter and Peachtree Windows, Semco  Known part number stamped on back: 45428 Truth, Truth w/ House Symbol Replacement version for locks stamped with 21328A, Retro fit replacement option for lock with stamp on back of 31664  

    14 in stock

    $ 28.00

  • 520 Sliding Patio Door Panel Rollers - Steel Ball Bearing Known Brans and Part #'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield and more.

    520 Sliding Patio Door Panel Rollers - Steel Ball Bearing

    13 in stock

    Part Number: 520 Sliding Patio Door Panel Replacement Rollers - Steel Ball Bearing Sold Individually  (2 required per door)  5 3/4 inch long from Center of screw hole to center of screw hole 11/16" thickness 1 1/4 wheels  Style: Heavy duty for wood clad patio doors ( 1 roller weights 9.3 oz). Light duty for vinyl patio doors (1 roller weights 6.6 oz) Known Brands and Part#'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Semco and more.Known Part # 012021, PVS15, HWTR01 *Note to customer* there are a wide variety of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489  

    13 in stock

    $ 25.00 - $ 49.00

  • 216 - Crank Handle Adapter for ClereStory Windows "Female"

    216 - Crank Handle Adapter for Clear Story Windows "Female"

    22 in stock

    Part Number: 216 Crank Handle Adapter 5/8 Inch Hex Femail used with  Clear Story  Windows Size: Spline Size see list below 11/32 Spline Fits: Truth (Amesbury Truth): Marvin, Some Milgard, Caradco, Weather Shield, Hurd, BiltBest, Eagle, Vetter, Roto X Drive and Others 9/32 Spline Fits Peachtree and Getty 3/8 Special Spline Fits: Pella 3/8 Special Spline Fits: Anderson 3/8 Spline Fits: Some Milgard and Others Finish: Mill (Special order colors email for pricing: White, Black and Champagne)  Put those operable clerestory windows to energy-saving use with our 39-series clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (Hex-Bolt) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator.The removable extension crank is available in many standard sizes for either sill or jamb mounted operators. (See Manual Window Wands) The standard finish for the crank is natural anodized aluminum.

    22 in stock

    $ 16.95 - $ 41.95

  • Last stock! 518 Amesbury Truth Recessed Mortise Lock With 45 Degree Sliver Gray Cylinder

    518 Surface Mount Single Point Mortise Lock

    1 review

    4 in stock

    Part # 518 Replacement Door Mortise Lock for sliding Patio door Cylinder Color Style and Degree: Gray Style= 45 Degree Cylinder with faceplate  Face Plate Over All Dimensions: 6 1/8" Long x 3/4" Wide  Face Plate Top and Bottom mounting Screw Holes Center To Center Dimensions: 5-3/8"   overall depth 1-5/32 inch Black Style = 90 Degree Cylinder - will not come with faceplate customer will need to reuse their old one You must replace the mortise lock with the same version (you can usually determine this as the old cylinder where colored either Gray or Black. The angle of the Gray cylinder is at a 45 degree angle and the black is at a 90 degree angle) If you do not choose the correct one keyed cylinder will not fit/operate. If your Cylinder is silver or gold looking color you have the newer style determine which style you need by the slot degree inside the cylinder (see drawing for example the 45 degree cylinder) Manufacturer: W&F Known Manufacturing Brands Used on: Hurd, Peachtree, W&F *replacement and more Similar Looking Products With Different Dimensions:  Part Number C1033

    4 in stock

    $ 47.00

  • S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation

    S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F

    6 in stock

    Part Number: S4112 W&F Multipoint Mortise Lock  2-3/8IN BACKSET For 6 Inch handle  Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875 Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.  Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base. This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002]. Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise. DO NOT TAKE APART THE MORTSE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTSE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT. Associated Parts Sold Separately: S4112TK - Alignment Key Tool - System Rod Timing Key D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock  

    6 in stock

    $ 250.00

  • Amsbury Truth T Crank Handle. Also called Wing handle or Butterfly Handle Crank Handle 11/32 Spline Operators. Hurd Casement and Awning Window Replacement Parts Known Part Numbers: 136, Truth 40984, 021951, 37-125-2. Color Goldtone / Gold

    135 Amesbury Truth 'T' Handle with 11/32 Inch Spline

    46 in stock

    Part Number: 135 Amesbury Truth T Crank Handle. Also called Wing handle or Butterfly Handle Crank Handle for Amesbury Truth 11/32 Spline OperatorsUsed primarily on: the Amesbury Truth DLX Maxim, 15 series, 11 series casement and awning window Operators.Colors In Stock: Goldtone, Bronze, White, Clay, Aluminum, Black, New Goldtone,  Oil Rubbed Bronze (this is a faux ORB),  Special Order Colors: Chestnut Bronze, Brushed Copper Nickel, Off-White, Cocoa Brown, Bright White, (No returns 1 - 3 week lead time).   Known Part Numbers: 136, Truth 40984, 021951, 37-125-2 Used on: Amsbruty Truth Operators, Norco, Hurd Casement and Awnings, Weather Shield, and more.  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter and more. Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007 and many other window brands that use Truth Hardware  

    46 in stock

    $ 20.00 - $ 30.00

Peachtree Doors and Windows Replacement Parts and Hardware

Login

Forgot your password?

Don't have an account yet?
Create account