Part Number: 815 / 816
Vertical and Horizontal Adjustable Door Hinge
Hinges are handed! Match up your existing hinge to picture to determine what handing you need.
Finishes:
In Stock: If you order more than what we have in stock the order will be considered pre-order and will ship out as soon as we receive in from the factory. If you would like what we have in stock partial shipped please leave a note in not comment section of your order stating to partial ship.
Pre-Order: If finish is a pre-order we will ship out as soon as we receive in from the factory. lead times can very but can be 6-8 weeks
Discontinued Finishes: Goldtone, Brushed Chrome and True Oil Rubbed Bronze. Limited stock available. The discontinued colors we have in stock may have some minor scratches - no returns or exchanges, they are sold as is. Once our stock is gone we will be unable to get more.
Dimensions: Over all 3 3/4" W x 4 1/4" H
Condition:
New - New product - unused
As Is - New product with finish flaws or scratches. This item may be a customer return, vendor sample, or came in from the factory with finish flaws. In some instances, these items are repackaged. Not available in all colors or handing. All sales final, No returns.
Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 815/816 Screw Pack (1 screw pack will do 1 hinge).
Or you can buy at your local hardware store the following:
QTY 4 - #9 x 3/4" or 1” PH Screw (size change depends on what finish the screw is available in)
QTY 4 - #7 x 1-1/4" PH Screw
QTY 1 - #9 x 2-1/2” or 3” PH Screw (size change depends on what finish the screw is available in)
Link To Hinge Adjustment Instructions
Number to be found on back of Leaf 903 and on back of adjustable side of hinge 921.
These hinges have been known to be used on Hurd Patio doors and BiltBest Patio Doors, Marvin Ultimate Inswing Patio Doors From 1993 - 1996 and other door brands. (Known part #: 815, 816 903, 291, 2443, 085439, 021791, 085442, 010294, 031239)
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU.
Part Number 137
Truth Amesbury Encore: Tango Folding Handle and Operator Cover for Casements and Awning Operators 13342 12616
Handing: Casements can be left or right handed See pictures to determine handing you need to order. Awnings always will be Left Hand
Colors In Stock: New Goldtone, White, Bronze, Champagne
All other colors not in stock can have a estimated 1-4 week lead time. Price depends on finish selected.
Encore Operators Sold Separately:
Part Number: 119 Casement Encore Dual Arm Sill Mount Amesbury Truth
Part Number: 147 AmesburyTruth Encore Sill Mount Casement Operator-Dyad
Part Number: 158 AmesburyTruth Casement Sill Mount Operator-Encore-Single Arm
Part Number: 207 Awning Amesbury Truth Encore Awning Sill Mount Operator.
Proper Installation of an Operator Cover & Nested Folding Handle:
When installing the cover and handle on the operator you should follow these instructions:
• Snap the cover onto the operator base.
• Place the handle onto the spline of the operator and rotate the handle to close the window.
• Lock the window in place.
• Rotate the handle ¼ turn back (towards opening direction) to reduce the pressure on the operator
. • If the handle needs to be positioned in a nested cover you can remove the handle at this time and re-position it so that it will rest correctly in the nested cover.
• Tighten the set screw on the handle.
• Unlock the window and cycle the sash open and closed until the handle returns to the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engage and seal the window.
• If the window does not come all the way into the closed position, and more force is required on the operator to close the window, you will need to review the window for the following; sash sag; racked window; lock points that are not properly aligned; or hinges not installed correctly. These issues should be corrected prior to repeating the installation of the handle onto the operator spline.
Placing the operator and the handle under high stress and abusive loads can cause permanent failures to the handle or operator as the window is repeatedly opened and closed.
This video will show how to attached # 137 Encore Cover and handle to the # 119 Truth Encore Operator
Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.
Known Part Numbers: 137, 096357, 096358, 096353, 096354, 096354, 096356, 13342 12616, HCSE54, MONCSE675
Known to have been used on the following brands: Hurd Operator cover and crank handle (nesting) for units manufactured 9/19/05 to present, Biltbest, Sierra pacific, Semco, Windsor, Lincoln, Comfort Line, Milgard, Fiber Frame, Monarch June 2006 to present and more
Part Number 335
Balance Window Springs For Single and Double Hung windows.
Replacement window springs used on many single hung and double hung windows with compression tilt jamb jamb liners. Each spring will come with a Clip as shown in picture. Clip is removable if you do not need it on your window.Due to the multiple sizes springs come in we do not stock springs. All springs are special order with a 1 - 2 week lead time. NO RETURNS for springs as they are special order/made to your order.Spring is 3/8" Diameter outside to outsideThe spring gauge or tension is as follows and is commonly associated with these color tips on the springs themselves: Red .041, Green .044, Yellow .047, Black .048, Purple .051To Order By Spring Length Inches : Measure from tip of Eyelet to tip of Eyelet on spring. (Eyelet is the round bent out part of the spring located at both ends).To know what color gauge and length to order you will need to remove the springs from the jamb liner. On Hurd windows the Springs are color coded at one end with paint. Please watch both how to videos below that show how to remove the jamb liners from your window/reinstall and how to remove and replace the springs.
Pro Tip: If the Springs are old and maybe a little stretched out it is better to order springs longer then you need as you can cut the springs shorter if needed by using a pair of Wire Cutters or Cable Cutters. Then you can bend out the eyelet with pair of regular pliers and flat head screw driver. See demonstration video below.Lead Time: Due to the multiple sizes springs come in we do not stock springs. All springs are special order with a 1 - 2 week lead time. NO RETURNS for springs as they are special order/made to your order. Larger orders may have longer lead times. Please contact us with any questions.
Have been used on Hurd, BiltBest, Weather Sheild and Cradco windows and many other window brands.
Part Number 152
EntryGard (EntryGuard) Dual Arm Operator 5 17/64" (inch) Style
Handing:
Left Hand
Right Hand
View pictures and how to video below (2:40 min) to determine handing you need.
Measurements in Chart (Scroll Thru Pictures for Chart):
"A" Measurement in Drawing is 5 17/64" Circled in red in chart
"B" Measurement in Drawing is 4 7/16" circled in red in chart
The other arm sizes are available for "A" and "B" measurements which can be ordered using our links below using our factory drop ship part catalog website (scroll thru pictures to see arm option chart for part numbers and See how to video below on how to read the chart).
Styles Available :
Link Offset Up
Link Offset Down
Note: Detached clips can be revered in the field to be on top of bottom of arm. 152 will all come as Clip on the top.
Finish:
E-Gard
Handle and Cover Sold Separately See part # 139 for handle and #166 cover, S1002 Cover or upgrade to #S1004 for nesting handle and cover.
Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A, 15-63-00-002 15-63-00-001, MONCSE953, R3-2256, 53-2255
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Norco Milgard, Sierra Pacific, Allsco (1980 to Dec. 1997), Monarch Old Series and more.
Other Arm Sizes Links to Order (this is an update to our video below). Watch video to see how to read chart in pictures above to determine your A and B Measurements match part numbers on chart to links below:
Click here to order: 36-181
Click here to order: 36-182
Click here to order: 36-183
Click here to order: 36-184
Click here to order: 36-186
Click here to order 36-185
Info on our parts catalog factory direct website
Cut Sheet For EntryGard Dual Arm 15 Series
Part Number: 139
3 1/2 inch with 11/32 Inch Spline
Replacement 3" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators
Truth Handle - Roto - Replacement Parts for Awning and Casement Windows operators. Colors: Bronze, New Goldtone, White, Beige, Brass, Goldtone, Clay, Aluminum, Chestnut Bronze, Medium Bronze, Brushed copper Nickel, Off-White, Black, Cocoa Brown Bright White, Tuscan Bronze, Oil Rubbed Bronze
Special Order Colors: Special order colors or Pre-order colors are non returnable and can have up to a minimum 3 week lead time. Large QTY orders of 50 or more will also be considered special order none returnable.
** Please note: That the Short Handle Roto Crank has been discontinued by the manufacturer. Once our stock is depleted we will ship out the longer version of the Roto Crank Handle that will work on your windows.
Known to have been used on many window Brands: Biltbest, Crestline, Caradco, Peachtree, Vetter, Oldach, Windsor, Sliver Line and Crank Handle standard Hurd used on casement and awnings manufactured pre February 1998.
Known Part Numbers: 139, 45054 31, HCSE29
Part Number: 131
Folding Crank Handle for Amesbury Truth 11/32 Spline OperatorsColors: Aluminum, Beige, Black, Bright White, Bronze, Chestnut Bronze, Clay, Faux Oil Rubbed Bronze, New Goldtone, Tuscan Bronze White
Special order Colors: Goldtone, Oil Rubbed Bronze, Bright Brass are a non returnable item- no returns for these items
Large Quantities Order: orders with QTY 50 or more are special order items no returns or order cancellations.
Related Parts:
Part # 101 Truth Maxim Dual Arm Casement Operator
Part # 102 Truth Maxim Split Arm Dyad Casement Operator
Part # 209 Truth Maxim Awning Operator
Part # 111 Truth Ellipse Style Split Arm Dyad Casement Operator
Part # 105 Truth Ellipse Style Straight Arm Casement Operator
Other Amesbury Truth Operators
Part # 131 Folding Handle was primarily used on Part # 101, 102 and 209 Truth Maxim casement and awning operators).
Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007. Also used on many other window brands that use Truth Hardware
Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3, 037189, 037188, 091691, 11329-32, HCSE31, A3-2104, A4-2149, A4-2150, A4-2147, A4-2148, 00-0000
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter, Allsco and more.
Updated 7/24/23
Part # 308 Clutch Shoe Pack
Compression Tilt Double Hung Windows
Measures 2-3/8" (or 2 13/32") x 1/2" x 15/32"
Color: White
Used On: Biltbest, Hurd, WeatherSheild, Caradco and many other window brands.
Known Part Number: H 4036
Associated parts Sold separately:
Part Number 335 Balance Spring
Part Number 307 Clutch Pin Pack
Part # 119
Casement Operator - Encore Dual Arm Sill Mount Amesbury Truth 50.10
119 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately.
Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.
Finish Arms available in: Standard E-Gard Beige (stock) and Stainless Steel (Non stock)*
*Non stock items are special order and can have a 2-6 week lead time. orders can not be cancelled or returned.
Associated Parts Sold Separately:
Part Number: 137 Encore Folding Handle and Cover Kit
Part # 187 - Sash Bracket with Set Ring - elbow arm of #101 operator snaps onto
Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto
Part # 114 - Sash Track (what the track shoe #189 slides into)
Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it.
Known to have been used on the following Manufacturing Brands: Hurd, Semco, Marvin, Cascade, BiltBest, Milgard, Sierra Pacific Monarch April 2006 to present and more.
Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.
Known Part Numbers: 119, 096357, 096358, 36-368EN, 36-369-EN
updated 7/8/23
Part Number: BB12005
Ashland Hardware Systems Casement Window Lock Handle and Escutcheon Bezel -
Handing: Non Handed
Color: White and Bronze
Material: Metal
Discontented: Plastic version
Known Part Number: C-6200-19 Stamped on Metal Version, P-6200-25A Stamped on Plastic Version, C-6200-42 stamped on metal version
Known to have been used on Biltbest casement and awning windows.
Part Number: 105
Amesbury Truth 15 Series "Traditional Square Case 13 1/2"" has been replaced by the Ellipse Case 60 Series (13 1/2"). They are a Direct Replacement, only difference is the case design. See pictures for more details.
13 1/2 Inch Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.
Known Part Number: 15.32, 105, 45251, 45136, U.S. PAT. 4505601, PAT. CANADA 1986, U.K. PAT. 2135397, 7707, 15-32-32-062, 15-32-32-061, HCSE43
Known Replacement Parts for: Hurd, Caradco, BiltBest, Oldach, Allsco, Semco (1976-1986) and more
Associated Parts Sold Separately:
139 Handle Roto Crank - 3 1/2" with 11/32" Spline
Operators with Similar Housing But Different Arms and Lengths:
Part Number S1082 - Truth/Wright Dyad Operator
Part Number S1048 - Truth/Wright Dyad operator
Part Number S1068 - Truth/Wright Dyad Operator
Part Number 105 - Truth/Wright Straight Arm
Part Number 115 - Truth/Wright Straight Arm
Part Number 109 -Truth/Wright Straight Arm
Part Number 112 - Truth/Wright Straight Arm
Part Number S1037 -GU - Split Arm Dyad Operator
Part Number S1038 GU - Split Arm Dyad Operator Kit
Part Number 111 - Truth/Wright Split Arm Dyad Operator
EntryGard Replacement Plastic Covers
Can be used on Straight Arm (Part #117) and Dual Arm Operators (Part #152) and many other Entrygard operator products.
Known Part Numbers On Operator: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific and more.
Part Number: 901
Amesbury Truth Kerf Mounted Hollow Window Weather Strip / Gasket
Special Features: TPE bulb Weather Seal. Designed for 0.078" kerf.
Other Information: Hollow TPE Bulb Seals
Color: Gray
Sold by the foot Rolled: Larger QTY's maybe shipped in multiple rolls. Example if you order 300 feet you may receive QTY 6 - 50 foot rolls. Some rolls maybe in increments of 25 feet. (full spool comes in 1000 feet only)
no returns of rolls of less than 25 feet
Returns will only be accepted for full uncut rolls in increments of 25, 50 and 100 feet.
No returns on 1000 foot spools
Known Part Number: 1727, 015512, HCSE454
Known Brands: Hurd Windows, AmesburyTruth, and many other window brands.
Maintenance: Weather Strip Seals are an maintenance item. You should replace your weather strip periodically once it’s worn out so windows seal properly. Lifespan of weatherstripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window.