Mortise Box Door Locks

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is  Only available as a kit now see part # 555 Part number 501-002 Double-Hook Mortise Lock Keeper (Truth Hardware) Comes with 1 Mounting plate keeper as shown in picture  501-002 is a Discontinued Old Style No longer Manufactured once our stock is gone it will  Only available at a kit now see part # 555 Related Product: Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit 501-002 Sliding patio door Keeper- AmesburyTruth- Hurd Sliding Door Comes with 1 Mounting plate keeper Discontinued Product. What we have in stock is all that is available. No returns all sales final.  Known part number: 4-5034

Read more less

Part # 518 Replacement Door Mortise Lock for sliding Patio door  Many times a door can not be locked because the mortise lock is broken.Cylinder Color Style and Degree: Gray Style= 45 Degree Cylinder with faceplate  Face Plate Over All Dimensions: 6 1/8" Long x 3/4" Wide Face Plate Top and Bottom Screw Holes Center To Center Dimensions: 5-3/8"   Black Style = 90 Degree Cylinder - will not come with faceplate customer will need to reuse their old one You must replace the mortise lock with the same version (you can usually determine this as the old cylinder where colored either Gray or Black. The angle of the Gray cylinder is at a 45 degree angle and the black is at a 90 degree angle) If you do not choose the correct one keyed cylinder will not fit/operate. If your Cylinder is silver or gold looking color you have the newer style determine which style you need by the slot degree inside the cylinder (see drawing for example the 45 degree cylinder) Manufacturer: Amesbury Truth Known Manufacturing Brands Used on: Hurd, Peachtree, W&F *replacement and more Product Highlights: Can withstand forced entry loads in excess of 1000 lbs. Hook bolt has anti-slam feature that will retract the bolt if the boor is extended Adjustable reach hook bolt is actuated by 90 degree rotation of the hub Similar Looking Products With Different Dimensions:  Part Number S1033

Read more less

Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Trim Plate  2818 Series - 2 Point - For Sliding Patio Door Keeper Sold Separately  Finish:  Standard (Stock) Stainless Steel (Special order non stock no returns) Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170 Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands. The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock

Read more less

Part Number: C1033 Amesbury Truth DS Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly single-point sliding door lock is the work-horse in the industry, with proven reliability and strength. We incorporate a variety of trim-plate options, making our system compatible with all standard fabrication in the market today. Can withstand forced entry loads in excess of 1000 lbs. Hook bolt has anti-slam feature that will retract the bolt if the boor is extended Adjustable reach hook bolt is actuated by 90 degree rotation of the hub Manufacture: Amesbury Truth Material: Standard or Stainless Cylinder: 45 Degree Faceplate mounting screw holes: 4 5/8 inch center to center Known Part Number: 555, 555-84 Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more

Read more less

Part Number C1059 C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock with Flat Trim Plate  (PAT#: 6,264,252  - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Faceplate  - 2 Point - For Sliding Patio Door

Read more less

C1059 Amesbury Truth PD GEMINI KEEPER 2-3 panel(DUAL MORTISE) Part Number: C1059 Dimensions: 5/8 inch wide x 10 7/8 inch long x 1/2 inch deep Style: Standard made of Zink or Coastal is non corrosive Stainless for Coastal or wet applications  Used on Cascade Patio Door PD GEMINI KEEPER For 2-3 panel (Used with DUAL MORTISE Lock) and Sierra pacific and Hurd Sliding all wood and wood clad patio doors Associated parts Sold separately:  Part Number C1035 Mortise Lock with Flat face plate Part number 558 Mortise lock with recessed flat plate  Use with Mortise Lock Box (PAT#: 6,264,252  - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE Known part number ADH-7007-00 2447 Keeper and ADH-3007-87 2447 Keeper

Read more less

Part Number: S3005 Sliding Patio Door Handle with mortise latch with upper body thumb turn  - For Vinyl and wood Sliding Door Handing: Left Hand Or Right Hand (see pictures or watch video below to determine what handing you need). Color: White or Beige  Dimensions: 4" Screw Hole Spacing  Interior Handle Dimensions: 9 7/8" Long X 1 1/4 Wide Exterior Handle Dimensions: 7 7/8" Long X 1 1/8" Wide Mortise Lock Box Dimensions: 8" Long X 9/16" Wide X 1 3/8" Deep - See product note about this mortise lock box and keeper  Product Note: S3005 comes with Vanguard mortise lock Box (locking mechanism) and keeper as shown in pictures, factory drawing and video.  S3005 is a kit from the factory, We can not piecemeal parts as the S3005  is a kit and always sold to us with the mortise box and keeper as shown, we can not order just the handle without a keeper or mortise lock box.  It has come to our attention some door manufactures did not use Vanguard mortise lock box and keeper in this kit but other styles. If your door has a different mortise lock and keeper you may need to reuse your existing one.  Some customers door had  C1035 mortise lock box and S3016 Keeper. (see links below for product page to compare to yours if you need the S1035 and S3016 you will need to order them with the S3005 kit) Associated parts Sold Separately:  C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock S3016 - Dual Hook Strike Keeper for Sliding Patio Door   Replacement parts: If you would like to order just the Vanguard Mortise lock book and keeper only please see part # S3009 No other replacement parts are available you must purchase a compete new Handle set, the factory does not sell any other parts separately.  Known Part Numbers and Brands: Fasco and Vanguard. PO# 31729,  Pat.# US6672632, VA-3200115, V Series 915 Mortise Handle. Used on Mercer Sliding Patio Doors and many other vinyl and wood sliding patio doors.  This patio door handle set is a Multi-Point lock set that comes with a White or Beige Left Handed or Right Handed inside handle and an upper body thumbturn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a White or Beige Diecast pull that can be keyed with the E 2000 cylinder. This set is often used on Vinyl or Wood patio doors. The set comes with a unique keeper and Multi-Point Lock. Material: Diecast Finish: Powder Coated Color: White or Beige Hole Center to Center: Multiple Hole Center Latch Style: Mortise Style Handle Type: Surface Mounted Key Option  handles come standard as Non Keyed (door can only be locked or unlocked from the inside) For Keyed add add part number 830 to order: (Door can also be locked and unlocked from the outside with key)  For Keyed Alike (for 2 or more handle sets ordered and can used the same key)add part number 830KA to order keyed alike Pro Tip for keyed handle sets only: If after you tighten the handle and the dead bolt won’t lock or unlock or really hard to turn, the tail part is too long and needs to be snipped down. See directions in pictures above. Grooves are on tail part to be snipped down so it can be used on multiple thicknesses of doors. 

Read more less

Part Number S3007  Mortise Lock with Faceplate 45 Degree Diagonal Hub with Keeper Aluminum Finish Associated Parts Sold Separately: Part Number: S3006 - C Elite Center Latch Sash Controls  Part Number: 522 - C Elite Offset Latch Sash Controls  Known Part Numbers and Numbers Stamped on Product: Canada Patent Number 919213 Dated 1973 Known Brand used on: Traco

Read more less

Part # S3009 Vanguard Mortise Lock Box Sliding Patio Door Comes with mortise lock box and keeper (keeper comes in white color only) If you would like to order the lock box with matching handle set please see Part # S3005 Known Brands: Fasco and Vanguard. PO# 31729,  Pat.# US6672632, VA-3200115

Read more less

Part Number: S3011 Sliding Patio Door Mortise Lock Box - Recessed Mount 597 Single-point sliding door lock is the work-horse in the industry, with proven reliability and strength. We incorporate a variety of trim-plate options, making our system compatible with all standard fabrication in the market today. Product Highlights: Can withstand forced entry loads in excess of 1000 lbs. Hook bolt has anti-slam feature that will retract the bolt if the boor is extended Adjustable reach hook bolt is actuated by 90 degree rotation of the hub Overall Dimension: 1" Wide X 5 1/4" High Manufacture: Amesbury Truth Associated Parts Sold Separately:  Part Number: 522 C Elite Handle Set - Offset Latch

Read more less