Casement Awning Hinges & Parts

21 products


  • 190 Wrench for Adjustable Hinge Tracks - Truth Hardware Wrench For Adjustable Hinge Studs 7/16" and 3/8" Wrench for Casement Hinge - Milgard Adjustment Wrench Part Number HA6806MI part number 31887, V982164 Adjustable Stud Hinge Wrench, 8/10-4/18

    Amesbury Truth 190 Wrench for Adjustable Hinge Tracks 31887 14 Series Casement Hinges- Truth Hardware Wrench For Adjustable Hinge Studs

    1 review

    Out of stock

    Part Number: 190 In Stock! Free Shipping!  Amesbury Truth Wrench for 14 Series Casement Hinges that have Adjustable hinge tracks -  Truth Hardware Wrench For Adjustable Hinge Studs - Low Profile Adjustable Stud Hinge Wrench, 8/10-4/18 This wrench only works on Truth adjustable hinges as shown in the pictures. If your hinge don’t look exactly like the picture shows this wrench will not work on your hinge (please scroll thru all pictures to compare with your hinge).  Wrench Size is: 7/16" on the straight side and 3/8" on the angled side - Number on part 31887,  For adjusting Hinge part #s 121, 122.  Adjustment Instructions For Sash Drag:  Remove Screen Open the window Slip the adjustment wrench onto the base of the stud, found between the support arm and the track of the lower hinge. Rotating the wrench away from the lock side of the window will decrease the amount of sash drag. The maximum sash drag adjustment is reached when the stud flats are parallel to the track. For severe sash drag, a similar procedure can be used on the upper hinge.  Upper hinge adjustment is made by rotating the wrench toward the lock side of the window. Maximum adjustment is obtained when the stud flats are parallel to the track. Close and open window to check for proper adjustment. NOTE: Turning the stud flats beyond parallel will not increase sash drag correction. maximum adjustment may cause binding as the window is closed. Please use caution. Use Proper PPE (gloves safety glasses) when preforming repair and maintenance tasks. If you feel you are not able to preform repair and maintenance tasks contact a local window service technician in your area.   Known Part Number: HA6806MI, 31887, V982164

    Out of stock

    $ 17.00

  • C2013 -Roto Operator Bracket Die Cast With Stainless Steel Arms Connect Arm Notched Out Casement

    Interlock C2013 -Roto operator bracket Die Cast With Stainless Steel Arms Connect Arm Notched Out

    57 in stock

    Part Number: C2013  Notched Arm is discontinued. Replacement style is what will be shipped. Roto operator bracket Die Cast With Stainless Steel Arms Connect Arm Notched Out Size: 5 3/8" Long Arm Follow Related Parts Are Sold Sold Separately: Part Number C2002 -  Roto America Interlock Casement Split Arm Operator Part Number C2003 - Roto Interlock Non Folding Handle 5/16 Inch Hex Casement Awning Part Number C2004 - Roto America 5/16 Inch Hex Casement and Awning Folding Crank Handle Part Number C2005 - SX Interlock Friction Hinge Set Cascade Casement Awning Windows Part Number C2006 - 4-1/8 Inch Black Top Spacer - Interlock Roto Part Number C2009  - Interlock Connect Arm w/ modified Clip 160MM 6 7/8" Long Arm Part Number C2011 - Clamp Washer Part Number C2012 Brootom Back Plastic Shim Part Number C2013 DIE CAST BRACKET WITH ARM STAINLESS STEEL CONNECT ARM NOTCHED OUT  -Roto operator bracket 5 3/8"

    57 in stock

    $ 35.00

  • C2005 SX Interlock Friction Hinge Set For Casement and Awning Windows. Known Part Number: 12C-IS23, 28-135C,  C2005 Known Part Numbers: 12C-IS23, 12C-IS23 RE, Interlock 12C-IS23 RE, XS Interlock 12C-IS23 RE, Interlock WORLD/PATS P1090 AI

    Roto C2005 SX Interlock Friction Hinge Set For Casement and Awning Windows

    32 in stock

    Part Number: C2005 XS Interlock Friction Hinge Set For Casement and Awning Windows Comes with Qty 2 hinges- 1 Left and 1 Right for Awning windows or 1 upper and 1 Lower for Casement Windows. (No screws included) Known Brands: Interlock, Roto, Cascade, Milgard, Ply Gem Known Part Numbers: 12C-IS23, 12C-IS23 RE, Interlock 12C-IS23 RE, XS Interlock 12C-IS23 RE, Interlock WORLD/PATS P1090 AI This hinge is to be used in conjunction with part # C2002 Interlock Roto Operator and many more.  Follow Related Parts Are Sold Sold Separately: Part Number C2002 -  Roto America Interlock Casement Split Arm Operator Part Number C2003 - Roto Interlock Non Folding Handle 5/16 Inch Hex Casement Awning Part Number C2004 - Roto America 5/16 Inch Hex Casement and Awning Folding Crank Handle Part Number C2005 - SX Interlock Friction Hinge Set Cascade Casement Awning Windows Part Number C2006 - 4-1/8 Inch Black Top Spacer - Interlock Roto Part Number C2009  - Interlock Connect Arm w/ modified Clip 160MM 6 7/8" Long Arm Part Number C2011 - Clamp Washer Part Number C2012 Brootom Back Plastic Shim Part Number C2013 DIE CAST BRACKET WITH ARM STAINLESS STEEL CONNECT ARM NOTCHED OUT  -Roto operator bracket 5 3/8"

    32 in stock

    $ 60.00

  • Replacement Awning and Casement HingeKnown Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532

    Amesbury Truth 121 Amesbury Truth Adjustable Hinge Track Kit - 10 and 14 inch style

    70 in stock

    Part Number: 121 Amesbury Truth Adjustable Casement and Awning Hinge Track Kit Stack Hight: 7/16" (see picture)  What's included: 1 left hand hinge track with hinge arm, 1 right hand hinge track with hinge arm (universal for both left and right handed casement Windows - hinges are used on the top and bottom of the casement window swap which one goes in top and bottom depending on how your window is handed).  Size: 10 inch, 14 inch (determine your size by measuring the track).  Finish: Standard (beige E-Guard powder coat shown in pictures), Stainless Steel Hinge track kits are adjustable. To order adjustable wrench see part # 190 (sold separately). Only one wrench is needed for multiple hingesAdjustable hinges help with sash dragging. When you adjust the bottom hinge toward the locking side it raises up the lock side sash up. If it makes it worse adjust the other way. If you have the old style hinges with the metal clip you MUST also replace the track, which comes in the kit, as the new style hinge arms do not have a metal clip to hold it to the track. They now have a set ring on the track to hold everything in place. Old style hinges with clip are no longer available.  Known Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532, 14-77-00-009, 14-77-00-010 Associated Parts Sold Separately: part number 190: Hinge Adjustment Wrench 

    70 in stock

    $ 47.00 - $ 57.00

  • shim for hinge track

    Hurd 183 Shim For Hinge Track

    252 in stock

    Part Number 183  Shim For Hinge Track Shim for casement and awning windows. This goes under the Non-Adjustable hinge track for easy home window repair.

    252 in stock

    $ 8.00

  • Ss10003 - Roto North America Hg05 10 Adjustable Hinge Kit For Casement Windows Stainless Steel /

    Roto SS10003 - Roto North America HG05 10" Adjustable Hinge Kit For Casement Windows

    31 in stock

    Part Number: SS10003 Roto North America HG05 10" Adjustable Hinge Kit For Casement Windows Direct replacement hinge for the HG04 Hinge Style What comes in a kit: 1 top and 1 bottom hinge track and 1 Top and 1 Bottom Hinge Arm (for 1/2” stack you will also get 2 black shims) Options for 10" Stainless Steel Adjustable Hinge Track: 10" Power Coated Washability Hinge Arm 10" Stainless Steel Washability Hinge Arm 10" Power Coated Egress Hinge Arm Stack Height: 7/16"  (For 1/2 inch order SS10020 shim) Measurements (taken at the longest and widest points): 10" Hinge Track: 9-5/8" L x 11/16" W x 5/16" D 10" Wash-ability Hinge Arms: Arm With Black Track Guide 6-1/4" long, Arm that attaches to Track Hinge Adjustment Nut 5-7/16" Long 10" Egress Hinge Arms: Arm With Black Track Guide 6-1/4" long, Arm that attaches to Track Hinge Adjustment Nut 7-3/16" Long Stack Height: 7/16" or 1/2" (1/2" No longer available SS10020 1.6 mm Sash Arm Spacer to make 1/2 inch stack ). HG05 Adjustable Wrench Sold Separately  If you need the shim only see part number SS10020 Information:  The Roto HG05 Hinge series features 10" washabilityversions as well as a 10" egress version and is suitable for mostcasement and awning window applications (wood, vinyl, aluminum,and fiberglass). They are available in both 7/16" and 1/2" stackheight versions, so there is no need for a spacer. The use of highquality materials and manufacturing processes makes this one ofthe strongest hinges on the market. The hinges are available inpowder coated steel or Stainless Steel versions. FeaturesEach hinge is equipped with Roto's quick disconnect feature thatallows for easy snap connection between the sash and frame.With a simple turn of a wrench, the hinge adjusts to compensatefor sash sag or window manufacturing variations, up to 3mm (.125).Additional holes in the hinge arms allow for installation into a bow/bay window and for adding a limiting device. PerformanceHinge arms are rounded at the edges to resist binding and thetrack/slider overlaps by 2.7mm (0.106") to prevent disengagement.The hinge slider is reinforced with a stainless steel insert for greaterrigidity and furnishes a 2mm clearance, eliminating interferencewith screws. The HG05 hinge is AAMA 904 life cycle compliant at 125 lbs. on the13" hinge and at 110 lbs. on the 10" version. Both steel versions areAAMA 907 corrosion compliant at 750 hours for powder coated andover 1000 hours for stainless steel. The hinges also pass ASTME1886 and ASTM E1996 hurricane impact testing. Known Part Numbers: HG05-7500, HG05-7501, HG05-7504, HG05-7505, HG057507, Replacement Hinge for HG04 styles

    31 in stock

    $ 35.00 - $ 45.00

  • Last stock! S1045 - Storm Window Adjuster Hinge With Pull Handle. No. 7-1314, All Glass Parts, Part Number #7-1817

    Wright Products S1045 - Storm Window Adjuster Hinge With Pull Handle

    1 in stock

    Part # S1045 Storm Window Adjuster - Pair. Locks window securely when closed. Comes with: Pair of adjuster hinges, 1 pull and screws. Customers have used part # S1045 as a replacement part for operating Octagon windows with Wright hinges. In stock  

    1 in stock

    $ 102.45

  • 106 Casement Sash Lift Block Pack Of 2 - Transparent Window Parts

    Hurd 106 Casement Sash Lift Block - Transparent

    41 in stock

    Part Number: 106 Casement Sash Lift Block- Transparent Transparent Sash Lift Block with adhesive backing. This mounts on the lower part of window frame opposite the hinge. About 2" from corner of frame (see picture - click on picture to enlarge). Size: 2 1/2" Long x 1 1/8" Wide

    41 in stock

    $ 7.00

  • Part Number S1090 - Roto 10" HP200 Track and Arm Casement Hinge Assembly Part number , 28-10-23

    Roto S1090 - Roto 10" HP200 Track and Arm Casement Hinge Assembly

    7 in stock

    Part Number S1090 Roto 10" HP200 Track and Arm Casement Hinge Assembly This is a discontinued hinge and the factory has to modify new style hinge to make work for the old style. You will receive the modified replacement style. See drawings  Stack Hight Options: 7/16"  stack height 9/16" stack height Please see pictures measurement "A" to determine what stack height you would need. 1/2" Stack Hight Discontinued No Longer Available  What's Included:  1 Left Hinge Track and Hinge Arm 1 Right Hinge Track and Hinge Arm (Left and Right can be called Top and Bottom as they are used on both Left handed and Right Handed Casements) 2 Shims Special Order Item. Not a stock item- no returns Known part number: HP200

    7 in stock

    $ 75.00 - $ 80.00

  • SS10004 - Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows. Part Number HG05-7202, HG05-7203, HG05-7506

    Roto SS10004 - Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows

    20 in stock

    Part Number SS10004 Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows Direct replacement hinge for the HG04 Hinge Style HG05 Adjustable Wrench Sold Separately See Part # SS10002 What comes in a kit: 1 top and 1 bottom hinge track and 1 Top and 1 Bottom Hinge Arm  Options for 13" Stainless Steel Adjustable Hinge Track: 13" Power Coated Washability Hinge Arm Measurements (taken at the longest and widest points See diagram): 13" Hinge Track: 12-11/16" L x 11/16" W x 5/16" D 13" Washability Hinge Arms: Arm With Black Track Guide 6-1/4" long, Arm that attaches to Track Hinge Adjustment Nut 7-1/4" Long 7/16" Stack height. ( for  1/2" Stack Height also order SS10020 shim)  Known Part Numbers: HG05-7202, HG05-7203, HG05-7506

    20 in stock

    $ 35.00 - $ 56.00

  • SS10002 Roto North America Stainless Steel Hinge Wrench. Part Number HG05-2010

    Roto SS10002 - Roto North America Stainless Steel Hinge Wrench

    9 in stock

    Part Number: SS10002 Roto North America Stainless Steel Hinge Wrench for HG05 Hinges  Fits on HG05 Hinge and Lock Bar Pin Product Note: Do not adjust past 1/4 turn past neutral either direction  This Hinge Works with the Following Hinge Kits" SS10003 - Roto North America HG05 10" Adjustable Hinge Kit For Casement Windows SS10004 - Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows Known Part Numbers: SS10002, HG05-2010

    9 in stock

    $ 30.00

  • 107 Sash Lift Beige Pack Of 2 Casement Window Parts

    Hurd 107 Sash Lift Beige

    85 in stock

    Part Number 107 Beige Sash Lift with adhesive backing. Located on the under side of sash - approximately 3 1/8" of edge of wood on the sash (See picture - click on picture to enlarge)Used on Hurd Casement Windows  

    85 in stock

    $ 7.00

casement and awning window hinge

Login

Forgot your password?

Don't have an account yet?
Create account