Window Operating Control Device (WOCD) Window Safety

6 products


  • SS20006 - Window Operating Control Devise Kit (WOCD)

    SS20006 - Window Operating Control Devise Kit (WOCD) 50-2003 Series

    443 in stock

    Part Number: SS20006  Window Operating Control Devise Kit (WOCD)  50-2003 Series For Hung and Horizontal Sliding Vinyl Windows  Complies with the ASTM F2090-10You need 1 kit per window - choose handing for Horizontal Slider. For a single Hung window you can use either a Right hand or Left hand Color: white, Almond (aka beige) and Clay see instructions in pictures  50-2003 Series Dual action WOCD designed to install directly to the face of the window jamb and interact with the active sash of any hung or sliding window. this device comes with mounting hardware to assure proper installation and is available  in right and left handing. This series was designed to be applied in the field or in the factory.  Kit Includes: Installation Instructions Operating Instructions 1 WOCD (Your Choice of LH or RH) 8 Screws (4 Pair) 3 Shims Color: White, Almond (AKA Beige) and Clay WOCD Installation Instructions PDF

    443 in stock

    $ 17.00

  • S1015 - Truth SafeGard 2R Window Operating Control Device (WOCD) For Casement Windows part number Model: 39-1177RH-kit,  Safegard™ 2 Window Opening Control Device

    S1015 -Amesbury Truth Residential SafeGard 2R Window Operating Control Device (WOCD) For Casement Windows

    75 in stock

    Part Number: S1015 Residential SafeGard 2R - Current Style Amesbury Truth Residential SafeGard™ 2R  Operating Control Device (WOCD) For Casement Windows The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. .  This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B") ****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)**** Style:  We recommend to check with your window manufacture which style to purchase for your window. R2 Standard -Track (with black clip and red button):  8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep (For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was:  6 3/8" Long x 3/4" Wide X 1/4" Deep C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote.  Safeguard 2R Installation Instructions PDF  Ordering Instructions for SafeGard 2R: Residential Applications  1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required. 2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member 2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review. Includes: Arm Assembly, Track  Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application). Product Highlights Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements Avoids interference with operation or performance of a window Features and Benefits beyond ASTM F2090-21 Fully concealed unit after installation and window in closed position Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C) Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag All adjustments can be done inside the home after window is installed Pan head screw (SS) use for ease of handling Concealed arm after released from track Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge WOCD will automatically re-latch when window is fully closed Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application Safegard 2R Residential Application Info:   As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel.  PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device  ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement   The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal).   Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows Window Type Casement Window Material: Wood Composite  Vinyl Recommended Mounting Screws #8 Pan Head, length and screw type dependent on application Current Safegard 2 Video Below Old Style No Longer With Red Clip Video Below- this style is no longer available replacement  is the S1015

    75 in stock

    $ 95.00

  • S1016 - ASSA ABLOY Casement Window Operating Control Devise WOCD

    S1016 - ASSA ABLOY Casement Window Operating Control Device WOCD KIT With Stickers

    55 in stock

    Part Number S1016  ASSA ABLOY Casement Window Operating Control Device WOCD KIT with Stickers!   Packed and Sold as Kit. Kit Contains:  One (1) 11.1mm Pin Strike One (1)  Latch ( Your choice of: Left Hand or Right Hand and 4 inch or 6 inch long) Four (4) mounting Screws One (1) Operational Sill Sticker One (1)  Indication Glass Sticker One (1) Installation Instructions. ASSA ABLOY Casement Window Operating Control Devise WOCD KIT The ultimate solution in residential window safety is now available with the connivance of an all-inclusive kit. Easy to fit with no routing required, m the ASSA ABLOY WOCD Kit is designed for use in windows with standard 11.1mm (7/16" hardware cavity). Features: 4 inch in stock ( 6 inch Lengths available for special order email for quote) Tested and compliant to ASTM F2090-13 Limits venting to less than 4" of opening Comparable with standard countersunk fixing Austenitic 304 stainless steel for enhanced corrosion resistance Convenience of all-inclusive bagging kit for ease of installation No fabrication required - cavity fitting   

    55 in stock

    $ 75.00

  • Ss20012 Vinyl Single Hung Routed Window Operated Control Device Wocd Mini Angel Fall Prevention -

    SS20012 Vinyl Single Hung Routed Window Operated Control Device WOCD Mini Angel Window Fall Prevention

    120 in stock

    Part Number: SS20012 Angle Vent Lock Mini Angel Window Fall Prevention  Sold Individually  Hung Routed Window Operated Control Device WOCD The Mini Angel is used on Vinyl, Aluminum and Fiberglass double and single hung sash windows. The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010 The Mini Angel is fitted into the stiles of the top sash - one on each side. The unit is primarily factory-fitted as access to the sash is required. however, provided the sash can be removed easily the Mini Angel is also suitable for us where the sashes have already been installed. The unit is clipped into the slot in the face of the top sash. the units are therefore tamper-proof. IMPORTANT: Window manufacturing and device fitting is subject to tolerances beyond our control. For this reason, it is the responsibility of the window manufacturer and/or installer to ensure that the correct product is specified and fitted. The installer must confirm that the device operates and resets correctly otherwise the safety features provided by this product will not work . If the device does not reset correctly it will not comply with ASTM F2090-2008, 2010 and 2017 regulations and will not be fit for purpose. Colors: White and Beige (aka Almond or Tan)   Stamped on Side of Part: MIGHTON PCT/GB09/1526 Used On SuperSeal Vinyl, Hurd Vinyl and Sierra Pacific Vinyl and other vinyl Single Hung windows For an aftermarket installation of WOCD see part number: SS20006  

    120 in stock

    $ 12.00

  • S1015 - SafeGard Window Operating Control Device (WOCD) For Casement Windows Right hand

    S1015 Gen 1 SafeGard Window Operating Control Device (WOCD) For Casement Windows

    Out of stock

    DISCONTIUNED PRODUCT S1015 SafeGard "Gen 1” is the “Old Style" with the red plastic part has been discontinued.  SafeGard 2R the "New Style" In the Narrow Style is the replacement for residential applications according to Truth. There is also a Standard Style. We recommend to check with your window manufacture which style to purchase for your window.- Click here for Link to SafeGard 2R New Style INFOATION BELOW FOR REFERANCE ONLY AS GEN 1 IS A DISCONTUDED PRODCUT  SafeGard™ Gen 1 -  Operating Control Device (WOCD) For Casement Windows SafeGard Gen 1 Overall Track Size (Track is the part with Red clip at the end): 6 3/8" Long x 3/4" Wide X 1/4" Deep Handing: Left Hand Or Right Hand  (Part is marked L or R on red plastic part ) Ordering Instructions for Safegard Gen 1 Old Style - that has red plastic part: 1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. Confirm the hinge cavity on your casement window (See Fig. 2). The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep. The  SafeGard™ the Industry's first limiting control device offered for casement windows The  SafeGard™ Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The  ASTM F2090 addresses window fall prevention, that  helps protect against potential falls by children through  open windows. The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4". As required by code, the SafeGard™ Limit Device has a two (2) action operation to fully open the window  for egress purposes. This operation can be performed  without the use of keys or tools. Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset  automatically when window is in closed position.  The  SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran  cover and tab. The  SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more  stringent safety requirements. Please consult local  building codes for WOCD and applicable requirements Includes: Arm Assembly, Track  Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. Note: The SafeGard™ Limiting Control Device will only work in casement windows that have a standard 2-bar hinge cavity with measurements as stated above.This Device is Not Designed for Awning Windows.This Device is Not Designed for Case-ment Windows with a 4-Bar Hinge. Known Part Number: 39-933LH and 39-933RH, Truth 14151.2    

    Out of stock

    $ 75.00

  • Vent Lock -Mighton Window Operating Control Device (WOCD) MEETS: ASTM F 2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms

    S1014 - Vent Lock -Window Operating Control Device (WOCD) Mighton

    11 in stock

    Part Number: S1014 Vent Lock -Window Operating Control Device (WOCD see code specification) Key Operated Vent Lock - Vent Lock With Key and Strike The new innovative VENTLOCK acts as a major deterrent to snatch thieves who spot what they consider is an easily opened window. Fitting is simple, just screw/insert it into the appropriate diameter drill hole. The special key which is supplied as part of the VENTLOCK system releases an inner barrel which prevents the window from being moved. The barrel revolves freely preventing it from being cut. The VENTLOCK is competitively priced against existing window locks. Each VENTLOCK includes a steel operation key and a brass strike plate for mounting on the lower sash check rail. MEETS: ASTM F 2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms Vent Lock with Key and StrikeMIGHTON  

    11 in stock

    $ 40.00 - $ 45.00

Window Operating Control Device (WOCD) Window Safty  Angel Ventlock, SafeGard  Ensure compliance with the Code ASTM F2090-2008 and  ASTM F2090-2010

Login

Forgot your password?

Don't have an account yet?
Create account