Weather Shield Window and Door Parts

22 products


  • Casement Awning Roto Handle Part number stamped on the bottom OP06-1520. Known Part Number: SS10012 and OP06-1520, 7-1877W, 7-1877AD, 7-1877BW, 7-1877DB

    SS10012 - Roto X Drive Handle for Casement and Awning Window Operator

    2 reviews

    343 in stock

    Part Number SS10012 Roto handle for X Drive operators for Casement and Awning Windows  Spline: 5/16"  Number stamped on bottom of handle known to be: #OP06-1520 In Stock Colors: Blue White, Bright White, Euro White, Beige (aka Almond), Clay, Coppertone, Dark Bronze, and Black.  Special Order Colors:  Oil Rubbed Bronze, Brushed Chrome and Bright Brass. You will be notified of lead time once you place your order. Discontinued Colors No Longer Available: Old Clay - We call it "Old Clay" as it is much darker then the current "Clay" color that Roto manufactures. See color cart. How to tell white colors apart: When you have the handle on white copy paper the Euro White has a yellow hue compared to the paper, Bright White matches the color of the copy paper and Blue White has a blue tint compared to the paper (see our color cart picture). (Note the above is from comparing brand new handles. The sun can fade, change and yellow colors over time, if your handles are older try to use a handle that does not get direct or intense sunlight).  Associated Parts Sold Separately:  SS10011 Roto North America X Drive Dual Arm Vinyl Casement Operator S1062 Roto X Drive and Pro Drive Awning Window Operator SS10017 Roto 15 Inch Face Mount Track Assembly with Track Shoe 0P05100 SS10013 - Roto North America Face Mount Bracket Assembly For Vinyl Awning  For Pro Drive Version of handle see part number S1066 SS10012 is longer  and different from our S1042. Both are used on Roto North America X Drive OP06 Operators See pictures  Known To Be Used on Following Window Brands and Many More: Roto Casement and Awning Operators X Drive Operators SuperSeal Vinyl Windows and Sierra Pacific Vinyl Windows (For SuperSeal and Sierra Pacific Vinyl windows they used Euro White and Beige (almond) for their two standard colors Minnkota Windows (their "clay" color was the old clay that has been discounted by the manufacture).   PeachTree (their "clay" color was the old clay that has been discounted by the manufacture). Euro Star Windows & Doors WeatherShield Visions 3000 & 3500 series windows. Factory windows from Visions was "tan" which matched the offering from  (WindowPartsCenter) listed as "beige"  crestline windows  RC Home Showcase Windows CM100 Series  Royal Window and Door Profiles royalplast Allsco 4700 PREMIUM Known Part Number: SS10012 and OP06-1520, 7-1877W, 7-1877AD, 7-1877BW, 7-1877DB

    343 in stock

    $ 15.00 - $ 50.00

  • 528 - Patio Door Screen Roller Pack Of 2 White / No Parts

    528 - Patio Door Screen Roller - pack of 2

    2 reviews

    107 in stock

    528 - Patio Door Replacement Screen Rollers  Part Number 528 - Replacement Screen Rollers - For Sliding Patio DoorsSize: See Photos for measurements. 2 Inch Long Overall  with 1" steel wheel-ball barring.Sold in: Set of 2 per pack 1 left and 1 right In Stock:  All Metal and White Low QTY: Sand and Bronze are low stock discontinued item. If you can add to cart we have it in stock still. Once gone the all metal is the direct replacement. Colored Adjustment  : White, Sand and Bronze - due to industry shortages we are unable to get these at this time. if you can add to cart we have them in stock if you can not add to cart they are not available to order and you will need to use the all metal style.  Screws: Replacement screws are sold separately Click Here to add to order If you want to replace both top and bottom rollers (total of 4 rollers) you will need to purchase QTY 2 packs. These parts are NEW- Marks found on roller adjustment are not defects. Rollers come pre packaged by the manufacturer. The “marks” you see on the sand and white adjustment are from the molds they use to make the parts and put them together. This parts were used on Hurd doors prior to 2006.Known Brands and Part Numbers: 025701, 025702, 025703, 23739000000, Hurd, Crestline, ParkVue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Peachtree Citadel Door Roller, Semco, Marvin and more. *Note to customer* there are a wide verity of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489    

    107 in stock

    $ 30.00 - $ 39.00

  • 852 - Handle Set 6 Center To Bore Satin Nickel / Keyed Door Known to have been used on:  Replacement for Peachtree  Part # 06200031. and is a replacement handle set for Hurd, Jeldwen, Caradco "Hallmark Leverset",  Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829, 14421-WR.  Part # 06200031

    852 - Handle Set 6 inch Center to Center Bore

    18 in stock

    852 - Handle Set for 6" Center to Center Bore Colors: Bright Brass, Satin Nickel, Oil Rubbed Bronze*, Polished Chrome**, White** *Color AS IS: Oil Rubbed Bronze Type Finish (ORB). We will not accept returns on it for any reason for this finish. See finish note below. When you place your order for ORB you are agreeing to these terms for the ORB item. **Discontinued Colors: White and Polished Chrome. Once our stock is gone these colors will no longer be available  Fits 2 1/8" Crossbore on 6" and 6 3/32" bore Centers. Can also be used on doors with 1 3/4" Crossbore. The lockset includes removable posts.  2 3/8" Back Set Mounting Screw Holes 6 1/16" center to center Durable Finish Fits Right or Left Hand doors East to install with Phillips screwdriver Known to work on Weather Shield, and Hurd Swinging Patio doors and replacement for W&F handle set with 6" Center to Center Bores. Tools Required for Install: Philips Screwdriver and Slotted Screwdriver.  Detailed Installation Instructions Enclosed.  Keyed and Keyed Alike: Standard: All handle sets come random Keyed with 2 Keys. You can order as Keyed Alike for a small upcharge per handle.  For 2 or more handle sets you can  have all of the handle sets come keyed the same.  (Example if you order QTY 4 handle sets you will also need to add QTY 4 keyed alike to to your under found under accessory items)  Allow an addition 1-2 weeks for keyed alike handle sets to ship We CAN NOT rekey handle sets to any existing keys you the customer may have for your home, you the customer would need to hire a lock smith for that. Known to have been used on:  Replacement for Peachtree  Part # 06200031. and is a replacement handle set for Hurd, Jeldwen, Caradco "Hallmark Leverset", and replacement handle for 6" center to center bore handle  sets for Hurd, W&F Weather Sheild an more. Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829, 14421-WR.  Part # 06200031 *Finish Notice For Oil Rubbed Bronze Type:  Has NO manufacture warranty on finish wear.  This product is sold AS IS and we will not accept returns on it for any reason. **Warning** Do NOT use a power driven tool to attach the handle set face plate retaining screws...thread damage can result and is NOT considered a product defect. No returns will be accepted if when inspected product has thread damage and not in new condition.  NOTE! 852 only works for  6 inch center to center bore and 6 1/16 inch center to center mounting screw holes, 2 1/8" standard double double bore with latch and dead bolt (see video and pictures with dimensions). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or  2 1/8" multipoint bore  and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )   *Additional Finish Manufacturer Warranty info:  Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.  Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.

    18 in stock

    $ 230.00 - $ 260.00

  • 511 - Side and Head Seal Weather Strip for sliding patio doors. Hurd, park vue, weather sheild, part number 511, VISETWS6611,

    511 - Side or Head Seal Weather Strip for sliding patio doors

    19 in stock

    Part Number 511 Side or Head Seal Weather Strip for sliding patio doors Size: 94 5/8 Inch long This usually ships via UPS Ground. Color: Tan ONLY all other colors no longer available Bulk Pricing Shown In My Cart: QTY 2-9 30% QTY 10+ 40% Known to have been used on: Hurd  patio doors, Park Vue, weather sheild, Sierra pacific and many other wood and wood/clad sliding patio doors.  Associated Pars Sold Separately: Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 513 Vinyl Side Stop weather strip Used along with 511  Part Number 527 Wood Side Stop that 513 snaps into Part Number 505 Channel Weather strip

    19 in stock

    $ 5.00 - $ 80.00

  • W&F Handle With 6" Center to Center Bore.  Hurd, Jeldwen, Caradco "Hallmark Leverset", Peachtree and more. Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829,

    1200 Series Handle Set 6 inch Center to Center Bore (W&F Handle) - Discontinued See Details for replacement option

    Out of stock

    1200 series Handle Set 6" Center to Center Bore (W&F Handle) Discontinued No longer Available once our AS IS stock is gone  Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore Condition:  As Is - New product that is unused.  Either: discontinued item and only what we have in stock is available, old stock, a customer return, vendor sample, or came in from the factory with finish flaws. May or may not have finish flaws or scratch’s.  In some instances, these items are repackaged. Not available in all colors or handing.  All sales final, No returns. If you can add to cart it is in stock. Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1). Part number 852 is the replacement style for the 6” center to center double bore  backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below).    W&F Replacement Parts Sold Sold Separately: W&F Interior and Exterior Replacement Handles W&F Door Handle Solid Shaft 870 - W&F Handle Extension 701 Bushing Kit NOTE! 852 only works for  6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or  2 1/8" multipoint bore  and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )     *Additional Finish Manufacturer Warranty info:  Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.  Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.

    Out of stock

    $ 0.00

  • 513 - Vinyl Side Stop Weather Strip for sliding patio doors Hurd, Partk Vue, Sierra pacific, weather sheild

    513 - Vinyl Side Stop Weather Strip for sliding patio doors

    20 in stock

    Part Number 513 Vinyl Side Stop Weather Strip for sliding patio doors Length: 93 3/8 inch This usually ships via UPS Ground. Color: Tan ONLY all other colors no longer available Bulk Pricing Shown In My Cart: QTY 2-9 30% QTY 10+ 40% Known to have been used on: Hurd  patio doors, Park Vue, weather sheild, Sierra pacific and many other wood and wood/clad sliding patio doors.  Associated Pars Sold Separately: Part Number 527 Wood Side Stop that 513 snaps into Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 511 Vinyl Side or head Stop weather strip Used along with 513  Part Number 505 Channel Weather strip

    20 in stock

    $ 5.00 - $ 70.00

  • Replacement Awning and Casement HingeKnown Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532

    121 Amesbury Truth Adjustable Hinge Track Kit - 10 and 14 inch style

    64 in stock

    Part Number: 121 Amesbury Truth Adjustable Casement and Awning Hinge Track Kit Stack Hight: 7/16" (see picture)  What's included: 1 left hand hinge track with hinge arm, 1 right hand hinge track with hinge arm (universal for both left and right handed casement Windows - hinges are used on the top and bottom of the casement window swap which one goes in top and bottom depending on how your window is handed).  Size: 10 inch, 14 inch (determine your size by measuring the track).  Finish: Standard (beige E-Guard powder coat shown in pictures), Stainless Steel Hinge track kits are adjustable. To order adjustable wrench see part # 190 (sold separately). Only one wrench is needed for multiple hingesAdjustable hinges help with sash dragging. When you adjust the bottom hinge toward the locking side it raises up the lock side sash up. If it makes it worse adjust the other way. If you have the old style hinges with the metal clip you MUST also replace the track, which comes in the kit, as the new style hinge arms do not have a metal clip to hold it to the track. They now have a set ring on the track to hold everything in place. Old style hinges with clip are no longer available.  Known Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532, 14-77-00-009, 14-77-00-010 Associated Parts Sold Separately: part number 190: Hinge Adjustment Wrench 

    64 in stock

    $ 47.00 - $ 57.00

  • Replacement  Operator Folding Crank Handle for Amesbury Truth 11/32 Spline Operators  Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3,

    131 Amesbury Truth Folding Handle for Casement and Awning Operator 11/32 Inch Spline

    138 in stock

    Part Number: 131   Folding Crank Handle for Amesbury Truth 11/32 Spline OperatorsColors: Aluminum, Beige, Black, Bright White, Bronze, Chestnut Bronze, Clay, Faux Oil Rubbed Bronze, New Goldtone, Tuscan Bronze White  Special order Colors: Goldtone, Oil Rubbed Bronze, Bright Brass are a non returnable item- no returns for these items Large Quantities Order: orders with QTY 50 or more are special order items no returns or order cancellations.  Related Parts: Part # 101 Truth Maxim Dual Arm Casement Operator Part # 102 Truth Maxim Split  Arm Dyad Casement Operator Part # 209 Truth Maxim Awning Operator  Part # 111 Truth Ellipse Style Split Arm Dyad Casement Operator  Part # 105 Truth Ellipse Style Straight Arm Casement Operator  Other Amesbury Truth Operators  Part # 131 Folding Handle was primarily used on Part # 101, 102 and 209 Truth Maxim casement and awning operators). Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007. Also used on many other window brands that use Truth Hardware  Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3, 037189, 037188, 091691, 11329-32, HCSE31, A3-2104, A4-2149, A4-2150, A4-2147, A4-2148, 00-0000  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter, Allsco and more. Updated 7/24/23

    138 in stock

    $ 27.00 - $ 145.00

  • 105 Amesbury Truth Operator 15 Series Traditional Case Long Arm 13 1/2 Casement Window Parts

    105 Amesbury Truth Operator 15 Series Traditional Case Long Arm 13 1/2 Inch Ellipse Case 60 Series

    34 in stock

    Part Number: 105   Amesbury Truth 15 Series "Traditional Square Case 13 1/2"" has been replaced by the Ellipse Case 60 Series (13 1/2"). They are a Direct Replacement, only difference is the case design. See pictures for more details.  13 1/2 Inch Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.  Known Part Number: 15.32, 105, 45251, 45136, U.S. PAT. 4505601, PAT. CANADA 1986, U.K. PAT. 2135397, 7707, 15-32-32-062, 15-32-32-061, HCSE43 Known Replacement Parts for: Hurd, Caradco, BiltBest, Oldach, Allsco, Semco (1976-1986) and more Associated Parts Sold Separately:  139 Handle Roto Crank - 3 1/2" with 11/32" Spline Operators with Similar Housing But Different Arms and Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator  

    34 in stock

    $ 0.00 - $ 52.00

  • 520 Sliding Patio Door Panel Rollers - Steel Ball Bearing Known Brans and Part #'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield and more.

    520 Sliding Patio Door Panel Rollers - Steel Ball Bearing

    16 in stock

    Part Number: 520 Sliding Patio Door Panel Replacement Rollers - Steel Ball Bearing Sold Individually  (2 required per door)  5 3/4 inch long from Center of screw hole to center of screw hole 11/16" thickness 1 1/4 wheels  Style: Heavy duty for wood clad patio doors ( 1 roller weights 9.3 oz). Light duty for vinyl patio doors (1 roller weights 6.6 oz) Known Brands and Part#'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Semco and more.Known Part # 012021, PVS15, HWTR01 *Note to customer* there are a wide variety of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489  

    16 in stock

    $ 25.00 - $ 49.00

  • 216 - Crank Handle Adapter for ClereStory Windows "Female"

    216 - Crank Handle Adapter for Clear Story Windows "Female"

    10 in stock

    Part Number: 216 Crank Handle Adapter 5/8 Inch Hex Femail used with  Clear Story  Windows Size: Spline Size see list below 11/32 Spline Fits: Truth (Amesbury Truth): Marvin, Some Milgard, Caradco, Weather Shield, Hurd, BiltBest, Eagle, Vetter, Roto X Drive and Others 9/32 Spline Fits Peachtree and Getty 3/8 Special Spline Fits: Pella 3/8 Special Spline Fits: Anderson 3/8 Spline Fits: Some Milgard and Others Finish: Mill (Special order colors email for pricing: White, Black and Champagne)  Put those operable clerestory windows to energy-saving use with our 39-series clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (Hex-Bolt) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator.The removable extension crank is available in many standard sizes for either sill or jamb mounted operators. (See Manual Window Wands) The standard finish for the crank is natural anodized aluminum.

    10 in stock

    $ 16.95 - $ 41.95

  • S1003 REPLACEMENT PIVOT PIN, DOUBLE HUNG TILT 610/810 WINDOWS, RIGHT HAND - MILL FINISH Used by Weather Shield on 610/810 double hung tilt windows. Part Number: 640008 and 640007

    S1003 REPLACEMENT PIVOT PIN, DOUBLE HUNG TILT 610/810 WINDOWS, - MILL FINISH -Set

    1 review

    54 in stock

    Part Number S1003 Old Style is DISCONTINUED PRODUCT NO LONGER AVAILABLE. The current style is the replacement option available per the factory - see pictures and compare drawings with dimensions.  Sash Pivot Pin Set - 1 LH 1 RH per Set Zinc Die Cast Replacement part for Weather Shield Double Hung and Single Hung (known part number 640008 and 640007) If using current style As this is a replacement option we recommend buying 1 set to try and make sure it would work with you window application before ordering multiple sets. This is a retro fit application not a direct replacement. We have had multiple customers buy the current style and say they work as a replacement option for the old style pivot pin as long as the old style that is pictured on our website is what you have. If you feel that you are not able to retro fit the pivot pin we recommend customers contact a local a window service technician in your area.  Old Style Measurements:  Height: 1-3/4 inchWidth: 1/2 inchScrew Hole Spacing: 7/8 inch Current Style Measurements:  Length: 1-15/32"Width: 7/16"

    54 in stock

    $ 14.00 - $ 20.00

Weather Shield Window and Door Parts

Login

Forgot your password?

Don't have an account yet?
Create account