Amesbury Truth

205 products


  • 190 Wrench for Adjustable Hinge Tracks - Truth Hardware Wrench For Adjustable Hinge Studs 7/16" and 3/8" Wrench for Casement Hinge - Milgard Adjustment Wrench Part Number HA6806MI part number 31887, V982164 Adjustable Stud Hinge Wrench, 8/10-4/18

    Amesbury Truth 190 Wrench for Adjustable Hinge Tracks 31887 14 Series Casement Hinges- Truth Hardware Wrench For Adjustable Hinge Studs

    1 review

    Out of stock

    Part Number: 190 In Stock! Free Shipping!  Amesbury Truth Wrench for 14 Series Casement Hinges that have Adjustable hinge tracks -  Truth Hardware Wrench For Adjustable Hinge Studs - Low Profile Adjustable Stud Hinge Wrench, 8/10-4/18 This wrench only works on Truth adjustable hinges as shown in the pictures. If your hinge don’t look exactly like the picture shows this wrench will not work on your hinge (please scroll thru all pictures to compare with your hinge).  Wrench Size is: 7/16" on the straight side and 3/8" on the angled side - Number on part 31887,  For adjusting Hinge part #s 121, 122.  Adjustment Instructions For Sash Drag:  Remove Screen Open the window Slip the adjustment wrench onto the base of the stud, found between the support arm and the track of the lower hinge. Rotating the wrench away from the lock side of the window will decrease the amount of sash drag. The maximum sash drag adjustment is reached when the stud flats are parallel to the track. For severe sash drag, a similar procedure can be used on the upper hinge.  Upper hinge adjustment is made by rotating the wrench toward the lock side of the window. Maximum adjustment is obtained when the stud flats are parallel to the track. Close and open window to check for proper adjustment. NOTE: Turning the stud flats beyond parallel will not increase sash drag correction. maximum adjustment may cause binding as the window is closed. Please use caution. Use Proper PPE (gloves safety glasses) when preforming repair and maintenance tasks. If you feel you are not able to preform repair and maintenance tasks contact a local window service technician in your area.   Known Part Number: HA6806MI, 31887, V982164

    Out of stock

    $ 17.00

  • 137 Encore Tango Folding Handle and Operator Cover Kit Part Number  13342 12616

    AmesburyTruth 137 Encore Tango Folding Handle and Operator Cover Kit 13342 12616

    2 reviews

    318 in stock

    Part Number 137 Truth Amesbury Encore: Tango Folding Handle and Operator Cover for Casements and Awning Operators  13342 12616 Handing: Casements can be left or right handed See pictures to determine handing you need to order. Awnings always will be Left Hand Colors In Stock: New Goldtone, White, Bronze, Champagne All other colors not in stock can have a estimated 1-4 week lead time. Price depends on finish selected.  Encore Operators Sold Separately: Part Number: 119  Casement Encore Dual Arm Sill Mount Amesbury Truth  Part Number:  147 AmesburyTruth Encore Sill Mount Casement Operator-Dyad Part Number: 158 AmesburyTruth Casement Sill Mount Operator-Encore-Single Arm Part Number: 207 Awning Amesbury Truth Encore Awning Sill Mount Operator. Proper Installation of an Operator Cover & Nested Folding Handle: When installing the cover and handle on the operator you should follow these instructions: • Snap the cover onto the operator base. • Place the handle onto the spline of the operator and rotate the handle to close the window. • Lock the window in place. • Rotate the handle ¼ turn back (towards opening direction) to reduce the pressure on the operator . • If the handle needs to be positioned in a nested cover you can remove the handle at this time and re-position it so that it will rest correctly in the nested cover. • Tighten the set screw on the handle. • Unlock the window and cycle the sash open and closed until the handle returns to the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engage and seal the window. • If the window does not come all the way into the closed position, and more force is required on the operator to close the window, you will need to review the window for the following; sash sag; racked window; lock points that are not properly aligned; or hinges not installed correctly. These issues should be corrected prior to repeating the installation of the handle onto the operator spline. Placing the operator and the handle under high stress and abusive loads can cause permanent failures to the handle or operator as the window is repeatedly opened and closed. This video will show how to attached # 137 Encore Cover and handle to the # 119 Truth Encore Operator Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.   Known Part Numbers: 137, 096357, 096358, 096353, 096354, 096354, 096356,  13342 12616, HCSE54, MONCSE675 Known to have been used on the following brands: Hurd Operator cover and crank handle (nesting) for units manufactured 9/19/05 to present, Biltbest, Sierra pacific, Semco, Windsor, Lincoln, Comfort Line, Milgard, Fiber Frame, Monarch June 2006 to present and more

    318 in stock

    $ 25.00 - $ 67.00

  • Part # 101 Amesbury Truth Maxim DLX Casement Dual Arm Operator Dimensions

    Amesbury Truth 101 Amesbury Truth Maxim DLX Casement Dual Arm Sill Mount Operator

    1 review

    Out of stock

    Part Number: 101 Amesbury Truth Maxim Dual Arm 50.00 DLX Sill Mount Casement Dual Arm Operator #101 101 Maxim DLX Sill Mount Style has been discontinued by manufacturer. Once our stock is depleted, you will order the replacement Encore Style Part # 119 and  You will need to purchase the cover and handle kit part number 137 sold separately. Colors in Stock for 101 Maxim Style: Goldtone ( once stock is gone you will have to order 119 Encore Style please watch videos below) To order 119 Encore style: go to 119 Encore Product Page - Part # 119 - Newer Encore Operators are a direct replacement/upgrade for these. See part number 119 You will also need to add to cart and order #137 cover and handle kit in the same handing Part Number: 137 Encore Folding Handle and Cover Kit PRODUCT TIPS Per Manufacturer 1. Operator base handing is determined by the window hinge side when viewed from the outside.2. Handing of Encore 119 Handle and cover is determined by the direction the handle points when in the nested position.3. Encore’s 119 unique spline design will only accept Tango or Encore specific handle designs.(See part number 137) (Note: This is part # 101  is the SILL MOUNTED version 7/16" measurement. For low profile version with 31/64" measurement see part number S1067 Amesbury Truth Maxim DLX Casement Dual Arm Low Profile Operator) Smooth and Curved appearance. Designed to operate sash size from 24" to 40" wide, 84" high and weighting up to 108 lbs.  101 Maxim: Older operators had black painted arms. Now arms are painted beige. Handle Sold Separately  Manufacturer Details: Exceptional Maxim Operators provide maximum performance to open and close larger windows with 33% less effort than previous operators. These operators feature a sealable housing to reduce water and air infiltration without the use of caulk or additional sealant. Available in a full range of operator styles, Maxim helps reduce manufacturing and inventory costs by using the same operator mounting location on every window size. An optional folding handle can be added. Stainless steel packages are available for demanding coastal applications. Developed as a system with Maxim Hinges and Locks to ensure maximum efficiency. Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific, Allsco and more.  Related Products Sold Separately for Part Number 101 Maxim Operator :  Part # 177 – non folding handle Part # 131 – Folding handle option Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Part # 119 - Newer Encore Operators are a direct replacement/upgrade for these. See part number 119 Part Number 137 Associated Parts Sold Separately For Encore Style 119:  Part Number: 137 Encore Folding Handle and Cover Kit RECOMMENDED SCREWS: (QTY 6)(PN 19240.XX)#8 X 1 FLAT HEAD SHEET METAL SCREW (SEE TRUTH TIPS FOR MORE INFORMATION) (QTY 2)FOR REAR MOUNT:#8-32 X 3/8 PAN HEAD MACHINE SCREW PN 19545.XX Known Part Numbers: 101, 090937, 010724, 010723, 090938, 010725, 010722, 41012, 36-368-2, 36-369-2, 50.00.XX.011 14D500P to 14D800P and 6D700P, 50-00-32-011, 50-00-24-011, 50-00-32-012, 50-00-24-012, HCSE25, S3-2254, S3-2253, S3-2252, S3-2251, S3-2250, S3-2249, U3-2248, U3-2247, 50.00-RH-SS-CHA Known to have been used on the following Manufacture brand windows: Cascade, Sierra pacific Allsco, Marvin, Weather sheld Hurd DLX duel arm for casements manufactured 2/02/98 to 9/19/2005, and more Videos:  This video shows how the 119 with 137 cover and handle is the direct replacement for the 101 operator and how to install. This video shows how the sash track shoe and sash bracket disconnect from the 101 and 119 operator This video shows the difference below the Goldtone color and New Goldtone If you are not sure you can e-mail us a picture of your existing operator. Please read our Parts Identification Instruction page and then e-mail your pictures to: info@windowpartscenter.com  

    Out of stock

    $ 87.00

  • Truth Wright Split Arm Mechanism  Goldtone 07900 and 55082 - Replaces old style Wright and Truth Operator Known Part Numbers: 7702, 45251, 55081, 55100 with 07900 or 21550 on Link Known Brands: Wright, Truth, Amesbury Truth, Hurd, Weather Sheild, Cradco, BiltBest, Oldac Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific and more.

    Amesbury Truth 111 Truth Split Arm Dyad Straight Link Casement Operator

    1 review

    106 in stock

    Part Number: 111 Wright / Amesbury Truth Casement Split Arm Dyad Operator Operator. Sill Mounted Straight Link 4 3/4" Split Arm Casement Window Operator Link Length: 3 1/2 Style:  Square or Ellipse: Square style has been discontinued. Once our stock in depleted the Ellipse Style will be the replacement option. You many need to retro fit the sill cover. (Click on picture to enlarge and watch video below for more details). Handing To determine what handing to order: Look at picture of part and match up your operator to our picture to determine if you need to order a Left or Right handing. Click on picture to enlarge. Colors: White, New Goldtone  This Casement Split Arm Operator was used on Hurd windows from 1988 to 02-02-1998. And has been used on multiple other window brands. This operator was first produced by Wright Manufacturing # 07900 sometimes found on arm of operator. Then Wright went out of business and Truth started producing this same operator. Known Part Numbers: 7702, 45251, 55081, 55100 with 07900 or 21550, 78900 on Link Known Brands: Wright, Truth, Amesbury Truth, Hurd, Weather Sheild, Cradco, BiltBest, Oldac Instructions on How To Replace Operator Click On Blog Link Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator    Known Part Numbers: 55100, 55101,  36-296-2 Used By: Hurd and Other Window Manufacturers 

    106 in stock

    $ 51.00 - $ 91.00

  • Dual Arm EntryGard Truth Casement window Operator.Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A

    EntryGard 152 Casement Operator EntryGard Dual Arm 15 Series

    101 in stock

    Part Number 152 EntryGard (EntryGuard) Dual Arm Operator 5 17/64" (inch) Style Handing:  Left Hand Right Hand View pictures and how to video below (2:40 min) to determine handing you need. Measurements in Chart (Scroll Thru Pictures for Chart):  "A" Measurement in Drawing is 5 17/64" Circled in red in chart "B" Measurement in Drawing is 4 7/16"  circled in red in chart The other arm sizes are available for "A" and "B" measurements which can be ordered using our links below using our factory drop ship part catalog website (scroll thru pictures to see arm option chart for part numbers and See how to video below on how to read the chart).  Styles Available : Link Offset Up  Link Offset Down   Note: Detached clips can be revered in the field to be on top of bottom of arm. 152 will all come as Clip on the top. Finish:  E-Gard Handle and Cover Sold Separately See part # 139 for handle and #166 cover, S1002 Cover or upgrade to #S1004 for nesting handle and cover.  Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A, 15-63-00-002 15-63-00-001, MONCSE953, R3-2256, 53-2255  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Norco Milgard, Sierra Pacific, Allsco (1980 to Dec. 1997), Monarch Old Series and more. Other Arm Sizes Links to Order (this is an update to our video below). Watch video to see how to read chart in pictures above to determine your A and B Measurements match part numbers on chart to links below: Click here to order: 36-181 Click here to order: 36-182 Click here to order: 36-183 Click here to order: 36-184 Click here to order: 36-186 Click here to order 36-185 Info on our parts catalog factory direct website Cut Sheet For EntryGard Dual Arm 15 Series 

    101 in stock

    $ 55.00 - $ 80.00

  • S3019 - Patio Door Handle Thumb Turn Replacement Kit With Full Tail. Color White. Part number S3019 13-341W-TT

    Amesbury Truth S3019 - Patio Door Handle Thumb Turn Replacement Kit With Full Tail Amesbury Truth

    73 in stock

    Part Number S3019  Patio Door Handle Thumb Turn Replacement Kit With Full Tail Amesbury Truth Available colors: White, Black, Bronze, Brushed Chrome, Antique Brass Discontinued Color No Longer Available: Almond Replacement part for handle set S3010 and S3017 other Amesbury Truth handle sets  

    73 in stock

    $ 25.00 - $ 45.00

  • Replacement 3 1/2" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators Known part # 139, 37-137

    Amesbury Truth 139 Handle Roto Crank - 3 1/2" with 11/32" Spline

    89 in stock

    Part Number: 139 3 1/2 inch with 11/32 Inch Spline Replacement 3" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators Truth Handle - Roto - Replacement Parts for Awning and Casement Windows operators. Colors: Bronze, New Goldtone, White, Beige, Brass, Goldtone, Clay, Aluminum, Chestnut Bronze, Medium Bronze, Brushed copper Nickel, Off-White, Black, Cocoa Brown Bright White, Tuscan Bronze, Oil Rubbed Bronze Special Order Colors:  Special order colors or Pre-order colors are non returnable and can have up to a minimum 3 week lead time. Large QTY orders of 50 or more will also be considered special order none returnable. ** Please note: That the Short Handle Roto Crank has been discontinued by the manufacturer. Once our stock is depleted we will ship out the longer version of the Roto Crank Handle that will work on your windows. Known to have been used on many window Brands: Biltbest, Crestline, Caradco, Peachtree, Vetter, Oldach, Windsor, Sliver Line and Crank Handle standard Hurd used on  casement and awnings  manufactured pre February 1998.  Known Part Numbers: 139, 45054 31, HCSE29  

    89 in stock

    $ 20.00 - $ 120.00

  • Replacement  Operator Folding Crank Handle for Amesbury Truth 11/32 Spline Operators  Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3,

    Amesbury Truth 131 Amesbury Truth Folding Handle for Casement and Awning Operator 11/32 Inch Spline

    162 in stock

    Part Number: 131   Folding Crank Handle for Amesbury Truth 11/32 Spline OperatorsColors: Aluminum, Beige, Black, Bright White, Bronze, Chestnut Bronze, Clay, Faux Oil Rubbed Bronze, New Goldtone, Tuscan Bronze White  Special order Colors: Goldtone, Oil Rubbed Bronze, Bright Brass are a non returnable item- no returns for these items Large Quantities Order: orders with QTY 50 or more are special order items no returns or order cancellations.  Related Parts: Part # 101 Truth Maxim Dual Arm Casement Operator Part # 102 Truth Maxim Split  Arm Dyad Casement Operator Part # 209 Truth Maxim Awning Operator  Part # 111 Truth Ellipse Style Split Arm Dyad Casement Operator  Part # 105 Truth Ellipse Style Straight Arm Casement Operator  Other Amesbury Truth Operators  Part # 131 Folding Handle was primarily used on Part # 101, 102 and 209 Truth Maxim casement and awning operators). Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007. Also used on many other window brands that use Truth Hardware  Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3, 037189, 037188, 091691, 11329-32, HCSE31, A3-2104, A4-2149, A4-2150, A4-2147, A4-2148, 00-0000  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter, Allsco and more. Updated 7/24/23

    162 in stock

    $ 27.00 - $ 145.00

  • 119 Amesburytruth Encore Casement Sill Mount Dual Arm Operator Window Parts

    AmesburyTruth 119 AmesburyTruth Encore Casement Sill Mount Dual Arm Operator 50.10

    74 in stock

    Part # 119 Casement Operator  - Encore Dual Arm Sill Mount Amesbury Truth 50.10  119 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately. Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.  Finish Arms available in: Standard E-Gard Beige (stock) and Stainless Steel (Non stock)* *Non stock items are special order and can have a 2-6 week lead time. orders can not be cancelled or returned.  Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Known to have been used on the following Manufacturing Brands:  Hurd, Semco, Marvin, Cascade,  BiltBest, Milgard, Sierra Pacific Monarch April 2006 to present  and more.   Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known Part Numbers: 119, 096357, 096358, 36-368EN, 36-369-EN updated 7/8/23

    74 in stock

    $ 49.00 - $ 69.00

  • Replacement Awning and Casement HingeKnown Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532

    Amesbury Truth 121 Amesbury Truth Adjustable Hinge Track Kit - 10 and 14 inch style

    70 in stock

    Part Number: 121 Amesbury Truth Adjustable Casement and Awning Hinge Track Kit Stack Hight: 7/16" (see picture)  What's included: 1 left hand hinge track with hinge arm, 1 right hand hinge track with hinge arm (universal for both left and right handed casement Windows - hinges are used on the top and bottom of the casement window swap which one goes in top and bottom depending on how your window is handed).  Size: 10 inch, 14 inch (determine your size by measuring the track).  Finish: Standard (beige E-Guard powder coat shown in pictures), Stainless Steel Hinge track kits are adjustable. To order adjustable wrench see part # 190 (sold separately). Only one wrench is needed for multiple hingesAdjustable hinges help with sash dragging. When you adjust the bottom hinge toward the locking side it raises up the lock side sash up. If it makes it worse adjust the other way. If you have the old style hinges with the metal clip you MUST also replace the track, which comes in the kit, as the new style hinge arms do not have a metal clip to hold it to the track. They now have a set ring on the track to hold everything in place. Old style hinges with clip are no longer available.  Known Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532, 14-77-00-009, 14-77-00-010 Associated Parts Sold Separately: part number 190: Hinge Adjustment Wrench 

    70 in stock

    $ 47.00 - $ 57.00

  • 166 Entrygard Operator Covers Cocoa Brown Casement Window Parts

    EntryGard 166 EntryGard Operator Covers 10341

    134 in stock

    Part Number 166 EntryGard Replacement Covers Only - 10341 Amesburty Truth  Truth EntryGard Operator Contour Cover Only - Fits 15 Series EntryGard Casement and Awning Operator andHandles 139 and 135 sold separately  - See Accessories items Known Part Numbers On Operator: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179 Discontinued Color:  Coppertone. For Additional Entrygard Covers in different styles  and colors see part numbers S1002 and S1004  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific and more. Free Economy Shipping On All USA Orders. If Cover color or QTY you want to order is is out of stock you can pre-order and parts will ship out as soon as they come in from the factory.

    134 in stock

    $ 12.80 - $ 55.00

  • HG210 HG200 S4007 - Amesbury Truth Adjustable Door Hinge - NON Removable Pin Known Part Numbers: 56-156CRBZ, 56-156DOBZ, HG 200, Pat. Nr.  8,429,794. Part Numbers: 56-156CRBZ, 56-156DOBZ, 56-156B,  HG 300, Pat. Nr.  8,429,794

    Amesbury Truth S4005 S4006 S4007 S4008 - Amesbury Truth Dual Adjustable Door Hinge HG210 HG200

    134 in stock

    Part Number: S4005, S4006, S4007 and S4008 Dual Adjustable Swinging Door Hinge - Horizontal a d Vertical Adjustment  Some hinge options have been discontinued by manufacture so we have combined the four part numbers on one product page to make it easier for you to see what is available. If a color you want says "unavailable" try changing the Style or Material selection.  Color/Finish: Black, Oil Rubbed Bronze, Satin Nickel, Bright Brass (not all colors are available  in all styles or materials).  Discontinued Colors: Craftsman Bronze Removable Pin (Use Oil Rubbed Bronze Removable Pin or Craftsman Bronze Non Removable Pin as the replacement) Style:  NON Removable Pin (NRP)- Suggested Use Outswing Door and Inswing door Removable Pin - Suggested Use Inswing door Only Material: Steel And Brass Condition: New Handing: Non Handed (works on both RH and LH doors) Screws: Screws Not Included Stamped on back of hinges: WWW.AMESBURY.COM/PATENTS FEATURES AND BENEFITS ’ Both Vertically and Horizontally Adjustable. Horizontal Adjustment ± .156 Vertical Adjustment ± .200 ’ Vertical Adjustment in Each Hinge Allows for Heavier Panels. ’ Adjusts with a Standard #2 Square Drive. Square Drive Prevents Stripping Over Phillips or Slotted. ’ Secure Out-Swing Non-Removable Pin Hinges  ’ Fits Common Fabrication within the Industry. Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Known Part Number: HG210 HG200 Pat. Nr. 8,429,794, HG200-B-90, HG200-B-91 Associated Replacement Parts: Part Number S4301 Hinge Cap updated 7/8/23

    134 in stock

    $ 45.00 - $ 120.00

Amesbury Truth

Login

Forgot your password?

Don't have an account yet?
Create account