Lincoln Window and Door Parts

Part Number 137 Truth Amesbury Encore: Tango Folding Handle and Operator Cover for Casements and Awning Operators  13342 12616 Handing: Casements can be left or right handed See pictures above, video and Pro Tip below to determine handing you need to order for your operator. Awnings operators will always will be Left Hand. Colors In Stock: New Goldtone, White, Bronze, Champagne All other colors not in stock can have a estimated 1-4 week lead time. Price depends on finish selected.  Pro Tip: Left Hand = White Bag to be used with Silver Worm.  Right Hand = Red Bag to be used with Gold Worm Encore Operators Sold Separately: Part Number: 119  Casement Encore Dual Arm Sill Mount Amesbury Truth  Part Number:  147 AmesburyTruth Encore Sill Mount Casement Operator-Dyad Part Number: 158 AmesburyTruth Casement Sill Mount Operator-Encore-Single Arm Part Number: 207 Awning Amesbury Truth Encore Awning Sill Mount Operator. Proper Installation of an Operator Cover & Nested Folding Handle: When installing the cover and handle on the operator you should follow these instructions: • Snap the cover onto the operator base. • Place the handle onto the spline of the operator and rotate the handle to close the window. • Lock the window in place. • Rotate the handle ¼ turn back (towards opening direction) to reduce the pressure on the operator . • If the handle needs to be positioned in a nested cover you can remove the handle at this time and re-position it so that it will rest correctly in the nested cover. • Tighten the set screw on the handle. • Unlock the window and cycle the sash open and closed until the handle returns to the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engage and seal the window. • If the window does not come all the way into the closed position, and more force is required on the operator to close the window, you will need to review the window for the following; sash sag; racked window; lock points that are not properly aligned; or hinges not installed correctly. These issues should be corrected prior to repeating the installation of the handle onto the operator spline. Placing the operator and the handle under high stress and abusive loads can cause permanent failures to the handle or operator as the window is repeatedly opened and closed. This video will show how to determine which handing to 137 cover and handle to order for your operator:  This video will show how to attached # 137 Encore Cover and handle to the # 119 Truth Encore Operator Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.   Known Part Numbers: 137, 096357, 096358, 096353, 096354, 096354, 096356,  13342 12616, HCSE54, MONCSE675 Known to have been used on the following brands: Hurd Operator cover and crank handle (nesting) for units manufactured 9/19/05 to present, Biltbest, Sierra pacific, Semco, Windsor, Lincoln, Comfort Line, Milgard, Fiber Frame, Monarch June 2006 to present and more

Read more less

Part Number 152 EntryGard (EntryGuard) Dual Arm Operator 5 17/64" (inch) Style Handing:  Left Hand Right Hand View pictures and how to video below (2:40 min) to determine handing you need. Measurements in Chart (Scroll Thru Pictures for Chart):  "A" Measurement in Drawing is 5 17/64" Circled in red in chart "B" Measurement in Drawing is 4 7/16"  circled in red in chart The other arm sizes are available for "A" and "B" measurements which can be ordered using our links below using our factory drop ship part catalog website (scroll thru pictures to see arm option chart for part numbers and See how to video below on how to read the chart).  Styles Available : Link Offset Up  Link Offset Down   Note: Detached clips can be revered in the field to be on top of bottom of arm. 152 will all come as Clip on the top. Finish:  E-Gard Handle and Cover Sold Separately See part # 139 for handle and #166 cover, S1002 Cover or upgrade to #S1004 for nesting handle and cover.  Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A, 15-63-00-002 15-63-00-001, MONCSE953, R3-2256, 53-2255  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Norco Milgard, Sierra Pacific, Allsco (1980 to Dec. 1997), Monarch Old Series and more. Other Arm Sizes Links to Order (this is an update to our video below). Watch video to see how to read chart in pictures above to determine your A and B Measurements match part numbers on chart to links below: Click here to order: 36-181 Click here to order: 36-182 Click here to order: 36-183 Click here to order: 36-184 Click here to order: 36-186 Click here to order 36-185 Info on our parts catalog factory direct website Cut Sheet For EntryGard Dual Arm 15 Series 

Read more less

Part Number: 131   Folding Crank Handle for Amesbury Truth 11/32 Spline OperatorsColors: Aluminum, Beige, Black, Bright White, Bronze, Chestnut Bronze, Clay, Faux Oil Rubbed Bronze, New Goldtone, Tuscan Bronze White  Special order Colors: Goldtone, Oil Rubbed Bronze, Bright Brass are a non returnable item- no returns for these items Large Quantities Order: orders with QTY 50 or more are special order items no returns or order cancellations.  Related Parts: Part # 101 Truth Maxim Dual Arm Casement Operator Part # 102 Truth Maxim Split  Arm Dyad Casement Operator Part # 209 Truth Maxim Awning Operator  Part # 111 Truth Ellipse Style Split Arm Dyad Casement Operator  Part # 105 Truth Ellipse Style Straight Arm Casement Operator  Other Amesbury Truth Operators  Part # 131 Folding Handle was primarily used on Part # 101, 102 and 209 Truth Maxim casement and awning operators). Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007. Also used on many other window brands that use Truth Hardware  Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3, 037189, 037188, 091691, 11329-32, HCSE31, A3-2104, A4-2149, A4-2150, A4-2147, A4-2148, 00-0000  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter, Allsco and more. Updated 7/24/23

Read more less

Part # 119 Casement Operator  - Encore Dual Arm Sill Mount Amesbury Truth 50.10  119 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately. Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.  Finish Arms available in: Standard E-Gard Beige (stock) and Stainless Steel (Non stock)* *Non stock items are special order and can have a 2-6 week lead time. orders can not be cancelled or returned.  Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Known to have been used on the following Manufacturing Brands:  Hurd, Semco, Marvin, Cascade,  BiltBest, Milgard, Sierra Pacific Monarch April 2006 to present  and more.   Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known Part Numbers: 119, 096357, 096358, 36-368EN, 36-369-EN updated 7/8/23

Read more less

Part Number 166 EntryGard Replacement Covers Only - 10341 Amesburty Truth  Truth EntryGard Operator Contour Cover Only - Fits 15 Series EntryGard Casement and Awning Operator andHandles 139 and 135 sold separately  - See Accessories items Known Part Numbers On Operator: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179 Discontinued Color:  Coppertone. For Additional Entrygard Covers in different styles  and colors see part numbers S1002 and S1004  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific and more. Free Economy Shipping On All USA Orders. If Cover color or QTY you want to order is is out of stock you can pre-order and parts will ship out as soon as they come in from the factory.

Read more less

Part Number: 105   Amesbury Truth 15 Series "Traditional Square Case 13 1/2"" has been replaced by the Ellipse Case 60 Series (13 1/2"). They are a Direct Replacement, only difference is the case design. See pictures for more details.  13 1/2 Inch Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.  Known Part Number: 15.32, 105, 45251, 45136, U.S. PAT. 4505601, PAT. CANADA 1986, U.K. PAT. 2135397, 7707, 15-32-32-062, 15-32-32-061, HCSE43 Known Replacement Parts for: Hurd, Caradco, BiltBest, Oldach, Allsco, Semco (1976-1986) and more Associated Parts Sold Separately:  139 Handle Roto Crank - 3 1/2" with 11/32" Spline Operators with Similar Housing But Different Arms and Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator  

Read more less

 Part Number 129 MIRAGE® CONCEALED MULTI-POINT LOCKING SYSTEM Casement and Awning Amesbury Truth Mirage Lever Lock & Escutcheon Kit Each Kit Comes With: 1  lever Lock and 1 escutcheon  The true beauty is what you can't see. Mirage's Concealed Locks for wood windows are so thin; they're barely noticeable. All locking points are concealed to create a clean look for your window system. The handle and escutcheon are removable for painting or staining wood trim. The tie bar guides are pre-located for quick and easy installation. Mirage's Multi-Point Locking System has an exceptional .625" pull-in and can withstand 245 lbs. of force per locking point. In Stock Colors: Champagne, White, New Goldtone, Bronze, Black All other colors are special order item. No returns or exchanges. Associated parts Sold Separately:  Bug Guards can also be purchased separately P/N 128 pack of 4 BACKPLATE LINK ASSEMBLY (11645.92) 198 Tie Bar Multi Point Window Locking Mechanism (in jamb version) Brand: Amesbury Truth Mirage, Energy Saver Vintage Hurd Casement and Awning, Sierra Pacific, H3 and many other window brands, Energy Saver Vintage Hurd Casement and Awning Kit Includes: Lock Handle, Escutcheon and 2 Bug Guards Known Part Numbers: 45265, 45376, 10-13 Sash Lock (B1), HCSE66, D4-2091, D4-2092, D4-2090

Read more less

Part Number 115 50 Series with traditional housing has been discontinued. Direct Replacement is the 60 Series with Ellipse Operator Short Arm 9 1/2" Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.  Amesbury Truth Single Arm 50 Series  Operator Short Arm 9 1/2" Color in picture: Goldtone To determine what handing to order: Look at picture of part and match up your operator to our picture to determine if you need to order a Left or Right handing. Click on picture to enlarge to see handing, color and dimension of operators PLEASE NOTE: Operators Old Square Style has been discontinued by manufacturer - once our stock is depleted we will automatically send the New Style which is the direct replacement. New Style Operator face is rounded rather than square. Known Part Number: 45251, 7707    Replacement Parts for: Hurd, Marvin, Cascade, Caradco, BiltBest, Semco, Oldach Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator  Known Part Number: 15-31-32-051, 15-31-32-052

Read more less

Part # 177 Replacement Amesbury Truth Non Folding Contour Handle - 11/32" Spline For Casement and Awning Window Operators.  Colors in stock: White, Bronze, Goldtone, New Goldtone and Beige Special Order Colors: Bright Brass, Clay, Aluminum, Chestnut Bronze, Brushed Copper Nickel, Black, Coppertone, Cocoa Brown, Bright White, Tuscan Bronze, Oil Rubbed Bronze. Special order colors are non returnable and can have a 1-3 week lead time. Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007 and many other window brands using Truth Operators, Allsco, Norco, Vetter, Windsor, Pozzi and many more window brands. Known Part Numbers: Truth 45240, 177, 010768, 010769, 090934, 11454-32, HSCE30, G4-2051, G4-2050, G4-2049, A3-2106, G5-2048, G5-2047, G5-2045, G5-2046

Read more less

Part number: 213 Pivot Slide Assembly - Black Plastic, pivot shoe  Dimensions 1 1/4" x 1 1/16" Black Slider Shoe for Awning DLX  Maxim and Encore OperatorsReplacement Part for awning window operator.Amesbury Truth Replacement Part Associated Parts Sold Separately:  Part Number: 718 - Amesbury Truth Awning Guide Bar Part Number: 207 Amesbury Truth Encore Sill Mount Awning Operator Part Number: 209 Amesbury Truth Maxim DLX Awning Operator  sliding transition element

Read more less

Part Number 207 Amesbury Truth Encore Awning Sill Mount Operator. Replacement awning window operator 207 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately. Color: E-Guard or Stailless Steel (this refers to the arms of the operator)  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6) 8 X 1 Flat Head Sheet Metal Screw  (Qty 2)Rear Mount:#8-32 X 3/8 Pan Head Machine Screw  Number Known to be stamped on back of arms: 41013 and 41016 Stamped on Back Side of Housing: Made In U.S.A Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Part Number: 718 - Amesbury Truth Awning Guide Bar Part Number: 213 Black Slider Shoe  Part Number: 212 Black Operator Retainer Clip updated 7/7/23

Read more less