Window and Door Tools And Supplies

Part Number: 190 In Stock! Free Shipping!  Amesbury Truth Wrench for 14 Series Casement Hinges that have Adjustable hinge tracks -  Truth Hardware Wrench For Adjustable Hinge Studs - Low Profile Adjustable Stud Hinge Wrench, 8/10-4/18 This wrench only works on Truth adjustable hinges as shown in the pictures. If your hinge don’t look exactly like the picture shows this wrench will not work on your hinge (please scroll thru all pictures to compare with your hinge).  Wrench Size is: 7/16" on the straight side and 3/8" on the angled side - Number on part 31887,  For adjusting Hinge part #s 121, 122.  Adjustment Instructions For Sash Drag:  Remove Screen Open the window Slip the adjustment wrench onto the base of the stud, found between the support arm and the track of the lower hinge. Rotating the wrench away from the lock side of the window will decrease the amount of sash drag. The maximum sash drag adjustment is reached when the stud flats are parallel to the track. For severe sash drag, a similar procedure can be used on the upper hinge.  Upper hinge adjustment is made by rotating the wrench toward the lock side of the window. Maximum adjustment is obtained when the stud flats are parallel to the track. Close and open window to check for proper adjustment. NOTE: Turning the stud flats beyond parallel will not increase sash drag correction. maximum adjustment may cause binding as the window is closed. Please use caution. Use Proper PPE (gloves safety glasses) when preforming repair and maintenance tasks. If you feel you are not able to preform repair and maintenance tasks contact a local window service technician in your area.   Known Part Number: HA6806MI, 31887, V982164

Read more less

Part Number S4104 Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions  Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4106 - Plastic Insert Part Number S4107 - Set Screw

Read more less

Part Number: SS10002 Roto North America Stainless Steel Hinge Wrench for HG05 Hinges  Fits on HG05 Hinge and Lock Bar Pin Product Note: Do not adjust past 1/4 turn past neutral either direction  This Hinge Works with the Following Hinge Kits" SS10003 - Roto North America HG05 10" Adjustable Hinge Kit For Casement Windows SS10004 - Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows Known Part Numbers: SS10002, HG05-2010

Read more less

Screen and Spline Installation Tool for Easy DIY Home Screen Repair Choose from: Plastic or Wood (shown in picture)

Read more less

Part Number: S1130 Sold in: Packs of 4 or 10 Replacement Window Lock and Keeper Screws Philips 1 1/4 Inch x #8 In Stock Colors: E-guard (used on keepers), New Goldtone, Goldtone, White, Bronze Specials Order Colors: Chestnut Bronze, Beige, Coppertone, Clay (allow 1-2 weeks for your order to ship)

Read more less

The Best Window, Door & Siding Sealant from OSI® Sold by the Tube 9.5 oz - for bulk QTY orders or other color options please contact us: info@WindowPartsCenter.com Features Proven Wet Surface Application Better Flexibility: 5x Stretch & 50% Joint Movement Consistent Bead in Hot or Cold Temperatures: 0°F to 140°F Application 24 Hour Fast Cure for Quicker Protection Paintable in 1 Hour Strong Adhesion to More Building Materials Without Primer Enhanced UV Resistance Sizes 9.5 fl oz (280 ml) Colors 4600+ Color Matches and Counting! (not all colors are available to order on-line if you would like a color not shown please give us a call at 877-824-5086) Due to individual screen limitations, colors shown here may not accurately reflect OSI® Quad® Sealant colors. Clean Up Mineral Spirits Discover the First Line of Defense Against the Elements. Simply put, OSI QUAD® MAX siding & window sealant delivers the toughness that really makes a job last. QUAD® MAX is the next generation of siding and window sealants, providing maximum durability and superior application performance for use in any condition. Recommended For the Pros, by the Pros QUAD MAX siding & window sealant is designed for sealing around interior/exterior windows, doors and siding. It bonds to a wide variety of materials without need for a primer such as fiber cement, cedar, brick, stone, coated aluminum, fiberglass, vinyl, PVC, stucco, EIFS, wood, glass, and flashing tapes and Kynar® coatings. For Professional Results Do not use joints immersed in water or applications requiring continuous water immersion.  Do not use as a traffic bearing sealant or in log homes.  For joints deeper than 3/8” (9.5 mm), a backing material should be used.   Due to individual screen limitations, colors shown here may not accurately reflect OSI® Quad® Sealant colors. Not all colors are available in QUAD Max. QUAD will be shipped in its place if QUAD Max is not available by manufacture. 

Read more less

Part Number S4105  For Hoppe and CES 2mm Hex Wrench Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.  Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4102 - Hoppe Full Cylinder Part Number S4103 - Hoppe Short Cylinder Insert part Number S4105 - Hex Wrench Part Number S4107 - Set Screw

Read more less

624Cheetah Door Installation Tool by JenTra Finally, a tool that allows anyone to achieve an accurate install every time.This kit revolutionizes the way door installation is viewed as well as helps to reduce the current burden that is associated with it. The tool uses integrated levels and built-in spacers that allow users to fine-tune ever unique installation.To Use: Simply click the tool onto the door and set it into position; then use the attached level and fasten the door into place. no more juggling 6-foot level or trying to balance the door while attempting to keep everything square. Each part is designed to keep the appropriate space around the door during installation. This helps to ensure the reveal between the door and jamb stays perfect. By keeping this space parallel and plumb, your doors will operate properly every time.This tool allows contractors and DIY'ers to easily install doors accurately and consistently, which in turn helps to prevent unnecessary callback and warranty claims. If a door is installed properly it will last to serve its purpose for many years to come. However, if a door is installed improperly it will build up tension and eventually warp or fail over time. Currently, improper installation is one of the largest causes for door failure and consequent door replacement by a manufacturer. In fact, when one of the largest door manufacture in America was polled, their answer was a staggering 95% of the doors that they take back on a warranty claim failed due to installation error and not because of any failure during their manufacturing process. IF this is sail hard to believe, walk around whatever building you are in right now and look at the doors, more particularly, look at the reveal or gap on the hinged side of your doors. If this gap is not parallel the entire length of the door, it is causing un-even tension, which in turn leads to... you guessed it, TROUBLES! Instructions 3 strike side pieces with fold down spacers and 1/8” reveal guides 3 hinge side pieces with fold down spacers, levels and 3/64” reveal guides 1 top piece with level, fold down spacers and 1/8” reveal guides 1 carry bag Price includes standard shipping  Limited quantities available 

Read more less

Part Number: Z44-4 PRO 12 and Z44-4 PRO 10  PRO 10 : In Stock PRO 12: In Stock Milling tool for No-Ha door cavity. This product is a non returnable item. Special cutterØ 44 mmCode: Z44 CUTTER with 44 mm diameter Milling out of the door cavity for all No-Ha products Nm 937 No-Ha 2.0 mini: lock with WC closure Nm 938 No-Ha 2.0 mini: lock NS 200 No-Ha 2.0 Slide: Handle for sliding doors D=40 mm (thickness) NS 205 No-Ha 2.0 Slide: Handle for sliding doors D=45 mm (thickness) NS 210 No-Ha 2.0 Slide: Handle for sliding doors D=50 mm (thickness) NS 105 No-Ha 2.0 Slide: Handle for sliding door one side. NK 250 No-Ha 2.0 Single: Handle for cupboards and drawers.  non returnable item.  No-Ha®2.0 is part of the No-Ha collection, which Includes the No-Ha Slide for sliding doors, No-Ha for drawers, cupboards and other accessories such as plates, wc handles

Read more less

Part Number 964 - Nailing Fin Corner Pad  window installation supplies For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)  Set Of 4 as shown in picture  Color: Black Stick On

Read more less

Part Number S2021 Sash Balance Rivet Setting Tool Associated Parts Part Number S2022 - Sash balance guide rivets

Read more less

Part Number 633 Replacement Pin for rivet removal Pliers  Used for Channel and Tube Balances Repair Accessories Sold Separately  P# 631 - Rivet Crimping PliersP# 632 -  rivet removal pliers

Read more less