Products

Part Number: S3025  Mortise Lock 1.254 Backset 45-Degree with Pocket Trim Plate Pocket Trim Plate is riveted onto the mortise lock box Dimensions: 4 9/16 inch  Long x 7/8 inch inch wide, 1 1/4" deep from center of 45 degree cylinder to outside edge of trim plate Mounting Screw Holes Center to Center: 3 9/16 inch Used By Manufacturer: Fiberlux and more

Read more less

Part Number: S3026 Door Mortise Lock  Deadlatch Assy. Brass Plated 45-Degree with Pocket Trim Plate Pocket Trim Plate can be removed by removing 2 screws  45 Degree Cylinder Dimensions: See Drawing  Mounting Screw Holds Center to Center: 5 1/4 inch Finish: Brass Plated Accessory Type: Security hardware Used By Manufacturer: Malta, Sunview and more Number Stamped on Trim Plate: 2147 2 QC-Pass 537-45 (Rev D)

Read more less

Part Number S3027 Amesbury Truth House Brand Single Point Sliding Patio Door Keeper 2315 Material: Stainless Steel Known Part Number: 2315-00 and 2315-84 Known Brands Used On: Jeld Wen and more

Read more less

Part Number: S3028 Traco Keeper 1-7/8in Avg Screw Hole Known Brand used on: Traco

Read more less

Part Number: S3029 Amesbury Truth DS Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly single-point sliding door lock is the work-horse in the industry, with proven reliability and strength. We incorporate a variety of trim-plate options, making our system compatible with all standard fabrication in the market today. Can withstand forced entry loads in excess of 1000 lbs. Hook bolt has anti-slam feature that will retract the bolt if the boor is extended Adjustable reach hook bolt is actuated by 90 degree rotation of the hub Manufacture: Amesbury Truth Material: Standard or Stainless Cylinder: 45 Degree Faceplate mounting screw holes: 4 5/8 inch center to center Known Part Number: 555, 555-84 Have known to been used on:, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, and more Videos below show different part number but install principles are the same: 

Read more less

Part Number: S4000 sold individually  Black Polypropylene Dust Cap for hoppe multipoint mortise   Used on swing doors that have Hoppe hardware For Latch and Deadbolt Strike and Tongue Strike

Read more less

Part Number S4003 - Vertical ONLY Adjustment  Before you place your order- S4003 vertical adjustment hinges must be used with S4004 horizontal adjustment hinge (sold separately) see hinge placement guide for more details. Adjustable Door Hinge -  Set Hinge With Non-removable pin - Vertical Adjustment  Non Handed - these hinges are for Left Hand and Right Hand Doors, by removing the set screw and hinge pin and changing the handing before you install it on your door. S4003 is a Set hinge- vertical adjustment only Pin is removable. S4003 works in tandem with S4004 sold separately. See hinge placement diagram in pictures and watch video below. Colors Available In Stock: Bright Brass no other finishes available *See finish note below Discontinued Colors: Oil Rubbed Bronze, white l, Brushed Chrome, Antique Brass , Black, Satin Nickel, Polished Chrome. (if you can add to cart we still have stock. Once stock is gone colors will be NLA and will not allow you to add to cart. No returns, all sales final on discontinued colors they are sold as is and have been marked down in price for quick sale). For Other Finish Options: You can use as a replacement option the S4009 Vertical hinge (it’s mate S4010 for horizontal adjustment)  - it has multiple finishes available in stock. they do have a different screw hole pattern and the leaf leg is slightly longer so to use them you need to replace all the hinges on the door panel so it don’t bind. Link to S4010 click here**** Condition: New - All hinges are new product All Sales Final = any color with "All Sales Final"  is a New product that has been discounted due  discontinued colors All sales final No returns on as is items. S4003 interchangeable and direct replacement for  Hoppe Columbus 2-D Hinge part # S4001 To Order Guide Horizontal Adjustment Hinge See Part # S4004 Set and Guide Hinge Placement - Also See Hinge Placement Guide Drawing: 3 Hinges Per Door Panel: Starting at top of door Top of door Guide (Part # S4004) Set (Part # S4003) Guide (Part # S4004) 4 Hinges Per Door Panel: Anytime you need 4 hinges you would just add another guide hinge Starting at top of door Top of door Guide (Part # S4004) Guide (Part # S4004)  Set (Part # S4003) Guide (Part # S4004) Vertical Hinge Adjustment Instructions:   Using a Phillips screwdriver, first adjust the panel up or down by turning the screw marked "V" on the set hinge. When turning the screw in the direction of the arrow (counter clockwise) the other leaf will be pushed in the direction of the arrow. Automatic screwdrivers are NOT recommended. The speed of the gun may strip the heads of the screws are over adjusted.  When the vertical adjustment is turned clockwise, the non-adjustable leaf will move in the direction of the arrow. The vertical adjustment has approximately 32 turns from its extremes. Replacement hinge for hinges with(watch video below) Pat. Nr. 5701636, Pat. Nr. 5,701,636 Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust. Known Brands: Hoppe Hardware, Hoppe Columbus, Semco, Windsor Doors and Superior Doors, Loewen Doors, Roto and more. Matching Screws are included with each hinge. *Finish Note: Not for Coastal or High Humidity Applications. These hinges do not come in a sea coast or stainless material, high humidity or costal application can cause hinges to corrade this is not a product defect. IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU How to Adjust video below updated 7/12/23

Read more less

Part Number S4004 - Guide Horizontal Adjustable Door Hinge  Before you place your order please read below and watch our how to video at the bottom of the product page to make sure you order the correct hinge you need. S4004 is non handed you can change the handing before you install by removing the hinge pin (see picture). For Left Hand and Right Hand Doors   Hinge is made of Steel S4004 is a Guide Hinge - Horizontal adjustment only . S4004 works in tandem with S4003 sold separately. See hinge  placement diagram in pictures and watch our video at the bottom of the product page. S4004 is the direct replacement and interchangeable with Hoppe Columbus 2-D Hinge part # S4002 . Colors Available In Stock: Bright Brass, no other finishes available *See Finish Note Discontinued Colors: Oil Rubbed Bronze, white  brushed chrome, Satin Nickel, Antique Brass , Black, Polished Chrome. (if you can add to cart we still have stock. Once stock is gone colors will be NLA and will not allow you to add to cart. No returns, all sales final on discontinued colors they are sold as is and have been marked down in price for quick sale). Other Color Finish Option: You can use as a replacement option the S4010 (it’s mate S4009)  - it has multiple finishes available in stock. they do have a different screw hole pattern and the leaf leg is slightly longer so to use them you need to replace all the hinges on the door panel so it don’t bind. Link to S4010 click here**** Condition: All hinges are NEW  To order Set Vertical Adjustment Hinge See Part # S4003  Set and Guide Hinge Placement - Also See Hinge Placement Guide Drawing: 3 Hinges Per Door Panel: Starting at top of door Top of door Guide (Part # S4004) Set (Part # S4003) Guide (Part # S4004)   4 Hinges Per Door Panel: Anytime you need 4 hinges you would just add another guide hinge Starting at top of door Top of door Guide (Part # S4004) Guide (Part # S4004)  Set (Part # S4003) Guide (Part # S4004 Horizontal Hinge Adjustment Instructions:  Always Adjust your vertical hinge first, then adjust your horizontal hinge. Using a Philips screw driver, adjust the panel side to side, by turning clockwise to increase margins, Turn counter clockwise to decrease the margins.  Horizontal hinge has approximately 7 turns from its extremes. Automatic screwdrivers are NOT recommended. The speed of the gun may strip the heads of the screws are over adjusted.  Replacement hinge for hinges with(watch video below) Pat. Nr. 5701636, Pat. Nr. 5,701,636 Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust. Never use power tools only use hand screw driver to adjust the door so you do not strip out the adjustment screws.  Matching Screws are included with each hinge. Known to work on: Roto, Semco Doors, Hoppe Hardware, Hoppe Columbus, Windsor Doors and Superior Doors, Loewen Doors and more *Finish Note: Not for Coastal or High Humidity Applications. These hinges do not come in a sea coast or stainless material, high humidity or costal application can cause hinges to corrode this is not a product defect. IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU

Read more less

Part Number: S4005, S4006, S4007 and S4008 Dual Adjustable Swinging Door Hinge - Horizontal a d Vertical Adjustment  Some hinge options have been discontinued by manufacture so we have combined the four part numbers on one product page to make it easier for you to see what is available. If a color you want says "unavailable" try changing the Style or Material selection.  Color/Finish: Black, Oil Rubbed Bronze, Satin Nickel, Bright Brass (not all colors are available  in all styles or materials).  Discontinued Colors: Craftsman Bronze Removable Pin (Use Oil Rubbed Bronze Removable Pin or Craftsman Bronze Non Removable Pin as the replacement) Style:  NON Removable Pin (NRP)- Suggested Use Outswing Door and Inswing door Removable Pin - Suggested Use Inswing door Only Material: Steel And Brass Condition: New Handing: Non Handed (works on both RH and LH doors) Screws: Screws Not Included Stamped on back of hinges: WWW.AMESBURY.COM/PATENTS FEATURES AND BENEFITS ’ Both Vertically and Horizontally Adjustable. Horizontal Adjustment ± .156 Vertical Adjustment ± .200 ’ Vertical Adjustment in Each Hinge Allows for Heavier Panels. ’ Adjusts with a Standard #2 Square Drive. Square Drive Prevents Stripping Over Phillips or Slotted. ’ Secure Out-Swing Non-Removable Pin Hinges  ’ Fits Common Fabrication within the Industry. Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Known Part Number: HG210 HG200 Pat. Nr. 8,429,794, HG200-B-90, HG200-B-91 Associated Replacement Parts: Part Number S4301 Hinge Cap updated 7/8/23

Read more less

Part Number: S4009 Before you place your order please read below and watch our video at the bottom of the product page to make sure you are ordering the correct hinge. Hoppe HTL Ultimate 2-D Hinge - Hoppe Set Hinge (vertical adjustment) - Removable Pin Style These SET HINGES ARE NOT HANDED - you can remove the pin to swap the handing for your door. (For NON-Removable pin style see Part # S4011 and they ARE HANDED, if any of the S4009 become unavailable you will need to order S4011) No Screws Included, hinges sold individually  screws needed: QTY 4 - 1 inch # 9 And QTY 4 - 1/2 inch #9 Material: Steel Color / Finish Options Are as Follows:  Bright Brass Rustic Umber  Matte Black  Stainless Steel  White  AS IS- Antique Brass, Brushed Chrome, Polished Chrome- NO LONGER AVAILABLE once stock is gone no more can be ordered as is no reruns as this is a discontinued finish. Replacement option is stainless steel color or See part number S4011 direct replacement hinge. We stock these hinges- if you would like a QTY check on a color please e-mail or text us. Product Description:  S4009 is a Set hinge- vertical adjustment only . Comes in multiple finishes. Pin is removable. S4009 works in tandem with S4010 sold separately. See hinge placement diagram in pictures and watch video below. Steel Reinforcements – Makes this new hinge the "Ultimate" with door systems. • Corrosion Resistant – Specially coated components for improved durability and strength. • Easy Adjustment – Set hinge (Part # S4009) has a vertical adjustment feature (+/- 2.5mm) Guide hinge (Part # S4010 sold separately ) has a horizontal adjustment feature (+/- 2mm) and works in tandem with S4009 see hinge placement description below and diagram in pictures. • Maintenance Free Bearings – No oiling required. • Simple Door Preparation – Quick and easy one pass routing. • Variety of Finishes – Available in finishes to match your HOPPE® handle sets. • Designed to carry up to 165lbs. per door. • Not to be used in commercial applications, especially not in conjunction with a door closer.   Set and Guide Hinge Placement (see picture diagram): 3 Hinges Per Door Panel: Starting at top of door Top of door Guide (use part # S4010) Set (use part # S4009) Guide (use part # S4010)   4 Hinges Per Door Panel (see picture diagram): Anytime you need 4 hinges you would just add another guide hinge Starting at top of door Top of door Guide (use part # S4010) Guide (use part # S4010)  Set (use part # S4009) Guide (use part # S4010) The Set hinge no matter what is always the 2nd from the bottom Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Pro Tips: Remove weight from the hinges by lifting up on the door before you adjust.  Never use power tools to adjust the hinge. ONLY use hand tools.  Hinge S4009- 1 hinge per panel. Vertical adjustment  feature (+/- 2.5mm) When the vertical adjustment (S4009) is turned clockwise, the non-adjustable leaf will move in the direction of the arrow. The vertical adjustment has 32 turns from it's extremes, and the horizontal (s4010) has 7 turns. Adjust the horizontal by turning clockwise to increase the margins. Turn counter clockwise to decrease the margins Known Part # 850-8762439 and Pat. Nr. 5701636, Pat. Nr. 5,701,636  

Read more less