Amesbury Truth

Part Number: C1033 Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly Material: Standard Cylinder: 45 Degree Faceplate mounting screw holes: 4 5/8 inch center to center Overall Depth: 1-9/32 inch or 1-5/32 inch (one we run out of stock of the 1 9/32 the 1-5/32 is all that will be available  Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more

Read more less

Part Number: S3004 - Sold Individually  Hoppe Handle Set Screw Size: 6M x 12 mm 304SS 

Read more less

Part Number S1068 Amesbury Truth Casement Dyad Operator With Link Offset Up 7/16”  Square Housing has been discontinued by manufacturer. You will receive the new Ellipse style housing for this operator as shown in picture Operators are handed. View pictures to determine what handing you need to order Handing: Left Hand Or Right Hand (USE OUR PICUTRES TO IDENTIFY WHICH HANDING YOU NEED TO ORDER!) In stock Colors: White, New Goldtone and Bron3  Pre Order - Special order colors lead time: Goldtone - 1 week lead time,   Option: No Clip CLIP NOTE: Clip can be ordered separately and applied in the field see part number S1105 (known part numbers that are stamped on the operators: Truth, 30905, 45251) Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 111 - Truth/Wright Split Arm Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit    

Read more less

Part Number: 542 Sliding Patio Door Rubber Bumper HurdColor: Black or Gray Only Random color shipped depending on availability Size: 3 inch or 4 inch Long - Once 3 inch is gone only 4 inch will be available and Customer can cut down to size if you need shorter Known to have been used on: Hurd, Sierra pacific

Read more less

Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Trim Plate  2818 Series - 2 Point - For Sliding Patio Door Keeper Sold Separately  Finish:  Standard (Stock) Stainless Steel (Special order non stock no returns) Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170 Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands. The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock

Read more less

Part Number SP20002 Amesbury Truth Casement Awning UTOLock Handle Colors not in stock please allow 2-4 weeks for your order to ship. Handing: None Color: White .42, Brushed Chrome, Bright Chrome, Bright Brass, Satin Nickel, Bronze, Oil Rubbed Bronze, Chestnut Bronze, Black, Matte Black, Satin Brass, Bright Nickel, Construction  Some colors can have longer lead times -see color chart Known to have been used on: Sierra pacific aspen and aspen 2 Casement and awning windows.  Associated parts Sold Separately:  Part Number SP20000 - UTO Lock Assembly For Casement Windows Part Number SP30000 - UTO Lock Assembly For Awning Windows Part Number SP20001 - UTO Escutcheon Part Number 137 - Operator Cover and handle Part number 119 - Casement Operator Dual Arm Part Number 147 - Casement Operator Dyad Arm Part Number 158 - Casement Operator Straight Arm Part Number  207 - Awning Operator

Read more less

Part Number: 147 Amesbury Truth Encore Sill Mount Casement Operator - Reverse Dyad Arm style 50.60 The Encore series Dyad operator is designed for narrow windows and will operate sash size form 16" to 32" Wide , up to 72" Height and weighing up to 55 lbs.  Handing Left Or Right - View pictures above, video and pro tip below to determine that handing you need to order.  147 is the Operator Only read pro tip below - You will need to purchase the cover and handle kit part number 137 sold separately. Pro Tip: Please note these operators are used on narrow windows and are called reverse dyad. So it’s going to seem confusing but for example if your operator is a right hand operator it will will need a left hand cover and handle kit. Handing designation is determined by the manufacturer see Amesbury Truths product tips in pictures. As well as video below.  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6)  8 X 1 Flat Head Sheet Metal Screw (Qty 2)For Rear Mount: #8-32 X 3/8 Pan Head Machine Screw Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Video to Determine Handing for Part Number 147 Operator and 137 Cover and Handle Sold Separately:   Video On How To Install Casement Operator:  Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known to be used on Hurd Windows narrow Casements  9/19/05 to Present, Anderson Windows 100 Series and many other window brands Known part number: 147, 36-371EN, 36-372EN

Read more less

Part Number C1045Heavy Duty Sliding Patio Door Rollers -AmesburyTruth Roller Sold Individually  Replacement Version: the old style is no longer available direct replacement is as shown in the pictures and what you will be sent. Finish: Standard or CoastalStandard in 9700 series cascade sliding patio doorKnown Part Numbers Stamped on Door Roller: 1980 U.S. PAT. 4,194,266 - 1982 CAN. PAT. 1,126,579 - Truth 31761A

Read more less

S3006 C Elite Center Latch Handle Set By Sash Controls (For the Off Set Latch version see part # 522).  In Stock Colors: White, Black All other colors are non stock and can have a lead time of 2-5 weeks once you place your order.  Style: Keyed, Non-Keyed and Dummy Non-Keyed handle sets: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed handle sets: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door. If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts). Dummy Handle Sets: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummy's are mounted on the secondary door. Allow 3-4 week lead time once order is placed. Dummy Handle set DO NOT need new Mortise lock! Special Order Colors: Antique Brass, Dark Oil Rubbed Bronze, Brushed Chrome, Bright Brass, Satin Nickel  (Lead time will very depending on color you choose and are special order items no returns). Number Stamped On Back of Plate: 2265 Brand: Sash Controls, Accent Door Mortise Lock Box Sold Separately: If your Recessed Mortise Lock has the 90 degree black cylinder  you will need to purchase a new recessed mortise lock part # 518, S3007 or #S3011 with the 45 degree gray/silver cylinder for this handle set to work. Both mortise box work with handle # S3006 you will need to choose the type that your door panel is machine prepped for. Associated Products Sold Separately:  Part Number: 518 Mortise Lock  Part Number: S3011 Mortise Lock Box Part Number: S3007 Mortise Lock Box Part Number: 522 - Sash Controls C Elite Keyed Handle Set with Offset Latch - Sash Controls  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the French style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.Never use power tools when installing handle sets you run the risk of stripping out the screws.    

Read more less

Part Number: S1120 Truth Non-Handed Casement and Awning Window Lock (works on both left hand and right hand casement windows) Product Note: silver gear on back solid - see pictures and video  What's Included: 1 Lock (your choice in color), 1 Keeper and mounting screws  Lock Mounting Screw Holes: 2 Inch Center to Center  Stamp on Back of Lock: Truth, Made in the U.S.A, Part Number 45098, P/N 31300G, P/N 31300H U.S.PAT.NO. 405928.4429910 CAN.PAT. 1980.1985 Known to have been used on BiltBest, Sierra Pacific Urban, wenco Casement Windows, Mercer and other window brands For Style Tandem Lock See Part Number S1143

Read more less

Part Number 212Black Plastic Dimensions: 5/8" x 1 29/64"Replacement Clip Part for casement and awning window operator.Amesbury Truth Maxim Replacement Part Sold Individually  Stamped on Back: 31879

Read more less

Part Number: SP20000 Casement Window UTO Lock Assembly Handing: Left Hand Or Right Hand Color: Beige Low Stock Item allow 1-3 weeks for your order to ship Known to have been used on: Sierra pacific aspen and aspen 2 Casement windows. (SP20000 will not work for awning windows please see part number SP30000 for awning window UTO lock assembly)  Patent Pending 4507-0134 B, HCU12449XXB0, HC12349XXA0

Read more less