Part Number: S1040
Amesbury Truth Casement Awning Operator handle ADA
Fits 11/32" Spline
Color: White and Black
Non Stock - Special order item
Stamped on back 45054
Part Number: S1059
Andersen Classic Operator Adapter Plate
Accessories That Ares Sold Separately:
Andersen Casement Window Sash Bracket Part Number S1056
Andersen Casement and Awning Window Classic Style Stone Cover Part Number S1057
Andersen Casement and awning Classic Style Stone Crank Handle Part Number S1058
Andersen Casement Window Classic Operator Crank Dyad Split Arm Part Number S1055
Andersen Casement Crank Window Classic Operator Straight Arm Part Number S1053
Part Number: 158-Encore
Amesbury Truth Casement Sill Mount Operator-Encore-Single Arm 52.11
158 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately.Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.
Brands Known to be used on: Hurd for 19"-27" wide casements, Weather Shield, Sierra Pacific
Associated Parts Sold Separately:
Part Number: 137 Encore Folding Handle and Cover Kit
Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle ¼ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.
Part Number: 158, 36-402EN, 36-403EN
housing stamped with truth made in the USA
