Part Number 964 - Nailing Fin Corner Pad
window installation supplies
For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)
Sold In: Set Of 4 as shown in picture
Color: Black
Stick On
Part Number 143
Amesbury Truth Small Sash Keeper Pack - For Window Lock
Color: Steel Finish or Beige - random selection based off of what we have in stock
Measurements: 1-3/4"W Overall x 11/16"H x 3/8"D - 1-3/8" center to center screw hole
Part Number 108
Casement / Awning Hand Knob
Fits Truth Operators 11/32" Spline OnlyColors: GoldTone, White, Bright Brass, Bronze, Clay, Aluminum, Chestnut Bronze, Beige, Coppertone
Bulk Discounted Applied in My Cart:
QTY 10-19 12%
QTY 20-39 19%**
QTY 40-79 25%**
QTY 80+ 29%**
**Orders of QTY 20 or more are considered specials order no returns.
Part Number: 716 - Tie Bar Lock Actuator Linkage For Awning and Casement
Current version Lock Actuator Linkage w/base. (Old style with no base is no longer available).
H3 Tie Bar Lock Actuator Linkage for Awning and Casement WindowsThis lock linkage goes with part # 715 Tie Bar Assemblies Awning and Casement WindowsFinish: E-Gard Beige. Stainless Steel available for Special Order Please Call or E-mail R&R for Pricing.This tie bar lock actuator linkage work on Hurd, H3 Gen2 and Sierra Pacific Hurd Brand Awning and Casement Windows as well as other window brands.
Known Part Number Stamped On Back Of Black Part: 40960 CAV
known part number 085171
Associated parts Sold Separately:
129 Amesbury Truth Mirage Lever Lock & Escutcheon Kit
Part Number 715 Tie Bar
Part Number 146
Amesbury Truth Window Sash Keeper for Window Lock
Part Number 146 all colors are Special order item - non stock, no returns. Allow at least 1-3 week lead time depending on factory stock.
Color: E-GARD, Stainless Steel and High Strength
Measurements: 1 21/64" Wide x 37/64 Deep x 57/64" Tall
May have 31344A stamped on it.
Truth EGRESS or Washability Hinge Kit with 13” Track
Both styles cones with both LH and RH hinge and track to do 1 complete window
See picture for details and measurements for the egress and washability style
Stack height A measurement: 7/16 inch
Style Option:
egress
When choosing egress style: For a casement window to meet egress it must meet ALL the following requirements: 20" Minimum width when open, 24" minimum height when open, total of 5.7 Sq Ft Net clear opening & bottom edge of glass should be a maximum of 44" from top of finished floor. You must check with your local building codes and window manufacture specs.
washability
Part Number 904
New Style Surround End Cap
Longest Length Weather Strip Comes in is 6' pcs
This product was used on the Hurd Encore and DLX Energy Saver Sash Manufactured from 8/2/04 to 9/17/07
Part Number: 128
Amesbury Truth Mirage Bug Guard (For Escutcheon)Color: Gray Only
You need QTY 2 Bug Guards Per Escutcheon
Associated Parts Sold Separately: To order Lock Handle and Escutcheon Kit see P/N 129
Center Roto Hook For Awning Window
This is the part that goes on the sash that the operator hooks on to. For Awning Windows.
Dimension - 3 1/16 Inch Longest point to Longest point
This part is used with our part # 211 operator.
Color: Limited supply of Black color old color. Once stock is depleted, only Beige E-guard will be available.l and shipped out.
Part Number 144
Amesbury Truth Window Sash Keeper for Window Lock. Keeper only
no screws included
Color: EGARD
Size: Large
Measurements: 1-3/4"W Overall x 29/32" H
1-3/8" center to center screw hole
May have 30827A stamped on the part.
Part Number: 116
Wood Lower Section for Sill Cover For Hurd Awnings and Casements
Size: 25 3/4 inch long
this part goes under the wood sill cover on the right and left side of the operator. - Customer will cut to fit. may need modification for older style Hurd Windows.