***STOP!!! read all info AND watch video below!!!!***
Part Number 555 is DISCONTIUDED. No Longer Available. The retro Fit Replacement option you will be shipped is part number 558 - please watch video below as you will need to mortise out wood from your door panel to make 558 work.
To Purchase part Number 558 Click Here
When purchasing new style 558 as a replacement for 555 you will also need new style keeper C1059 which is SOLD SEPARATLY click here for C1059
Old style keeper to go with # 555 SOLD SEPARATLY part number 501-002 click here for 501-002 keeper
Double-hook Mortise Lock (Truth Hardware) with pocket face plate
AmesburyTruth Hardware 2 Point Recessed Mortise Lock
This fits Hurd / Sierra Pacific Energy Saver Sliding Patio Door Old Style and many other door brands
Used on part number 501 handle set for sliding patio doors
Known Part Numbers: 097182, 097180, 4-5033, 4-5034
No Longer available to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-004 -Replacement Handle- Hoppe Door Handle Set - Hurd Swinging Door
Discontinued Product. What we have in stock is all that is available. Sold as is, no returns all sales final on this product.
Part Number S4104
Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4106 - Plastic Insert
Part Number S4107 - Set Screw
W&F Door Handle Solid Shaft Replacement Part
Aluminum
1- 37/64" (40.1 mm) long x 9/32" (7.1 mm) tall
Associated Parts Sold Sold Separately:
Part Number 701 W&F Single Handle Bushing Kit
W&F Interior and Exterior Replacement Handles
W&F Door Handle Solid Shaft
870 - W&F Handle Extension
840-029 Amesbury Truth GU Handle Set Thumb Turn Plastic Washer- set of 2 - Swinging Patio Door Hurd
Comes with 2 plastic washers
Two sizes available depending in your vintage of handle set. Large and small. Inside Diameter is the same on both.
See picture of thumb turn that shows with 2 washers on it. One goes on the outside of the faceplate and the other goes on the inside of the faceplate.
Discontinued Product. If it's in stock we have it. No returns all sales are final.
Part Number 820R
Hoppe Multipoint Automatic Roller Top Extension HLS9000 for HURD DOORS ONLY
CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different.
Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.
Style: Roller Top Extension ONLY
Size we stock: (see chart for full details and measurements):
6-8 = Top Extension Length 1019mm / 40.11in
Retro = Top Extension Length 1031mm / 40.59in
6-10 = Top Extension Length 1078mm / 42.44in
8-0 = Top Extension Length 1407mm / 55.39in
Comes with: Top extension ONLY (Bottom Extension with Gearbox SOLD separately see part number 810R for bottom extension with gear box)
The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd and other door manufactures – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock.
Associated Parts Sold Separately:
810R - Hoppe Multipoint Automatic Roller Lower Gearbox with Extension HLS9000
813 - Hoppe 3Pt Convert Auto Release Striker
833 - Hoppe 3Pt Convertible Under plate
834 - Hoppe 3Pt Striker For Rollers
819 - Hoppe Multipoint Latch Plate
S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP
S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set
S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set
S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set
S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N
Other Hoppe Multipoint and Single Point We Stock:
810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000
820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000
825 - Hoppe Single point Gear Box
For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote
Install Instructions (also see instructions in pictures):
Remove set screws on handle levers and remove
remove three mounting screws on faceplate estuation
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
810R/820R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.
***Discontinued Product. - see either link below to S4110 or 852 below for replacement handle options***
852-001 Dead Bolt For W&F Hurd Handle Set 1200 Series NO LONGER AVAIABLE
You will need to order replacement handed set:
(Long Style available to order with handle set see part number S4110 5 1/2" center to center bore)
Long Style available to order with handle set see part number 852 - Handle Set 6" Center to Center Bore
No screws included use # 7 x 5/8" FHSMS
Manufacturer: W&F
Brand used on: Hurd, Peachtree, Weather Sheild and more
Stamped on part is PAT NO 4,671,089 and 4,878,866
Discontinued Product.
840-027- Amesbury Truth GU Handle Set Thumb Turn Snap Ring - Swinging Patio Door Hurd
Sold individually - Comes in Large and Small, black and Sliver
Large inside diameter is approximately 17/32"
Small inside diameter is approximately 27/64"
Large and small snap ring are shown on a thumb turn see picture
Discontinued Product. If it's in stock we have it. No returns all sales final.
840-006 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door.
Replacement Door Handle only all other parts sold separately.
Discontinued Product. What we have in stock is all that is available.
No returns, all sales final, finishes color variation due to true metal finish and minor scratches.
Part Number 554
Sliding Patio Door Handle Set - comes with matching color tail lock latch - wooden latch is old style no longer available
Hole Center 3-15/16” CTC
.812 Tail
Non keyed or keyed (keyed only available for black and white option)
Black Or White Finish (Almond and Chestnut bronze are special order item no return)
Wooden Handle
***Does NOT include a Mortise Box***
Part Number: 533
Manufacture: Amesbury Truth
Known to have been used on: For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts
Old Style Stamped on part: 2153
Works as a replacement option for W&F keeper that has been discontinued
840-005 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door.
Replacement Door Handle only all other parts sold separately.
Discontinued Product. What we have in stock is all that is available.
No returns, all sales final, finishes color variation due to true metal finish and minor scratches.
