Hurd Swinging Door Parts

Part Number: 818 Tan Door Sweep For Swinging Patio Doors. Dimension: 36-13/16 Inch long x 1-13/16 Inch Wide x 3/8 Inch Deep Color: Tan Known to have been used on: Classic Hurd Swinging Patio Doors ca. 2/19/1996 and Prior Clad and All wood Exterior Hinged door. Can be trimmed in the field Maintenance: Sweeps are an maintenance item. You should replace your sweeps periodically once it’s worn out so windows seal properly. Lifespan of weather-stripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window. Known Part Number: 020848, HHPD23

Read more less

Part Number: 880 GU Latch and Dead Bolt Strike Plate Handed: Left Hand, Right Hand Colors:  Stainless Steel  Special order color: Oil Rubbed Bronze (special order items - no returns allow 2-3 weeks lead time) Discontinued Colors Once stock is gone no longer available: Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

Part Number: 826 New Style. Direct Replacement for 826 Old Style (See video) Amesbury Truth E-Lon .825 Compression Seal Swing Door Kerf Weather Strip Foam Seal Black Size: 4 foot or 12 foot long White and Bronze Size:  97 inch long Only No returns for special order items, all sales final Custom Orders: Custom sizes / colors available upon request. Minimum order of 24,000 feet would be required please email info@windowpartscenter.com for quote - no returns for custom orders. All sales final SERIES 12604 PRODUCT APPLICATIONSCompression Seal / Swing Door MATERIALClosed cell foamThermoplastic Elastomers (TPE’s)Rigid kerf material KERF WIDTH.125” (3.175mm) KERF DEPTH.50” (12.7mm) COMPRESSION50% (+10/-40) RABBET DEPTH2.125” (54mm) COMPRESSION SET (AAMA 702 test method)Less than 9% when compressed @75% 22 hours @ 158F (70C) WATER ABSORPTIONFloat - 0.4% , 1” Wick - 1.0%, Submerge - 5.4% INSTALLATIONSame profile seals the strike side, hinge side, and header.Installs easily in most out of spec kerfs. FIRE AND SMOKE RATINGS UL certification for 20 minute fire rating Equates to a category “J” rating UL certification to 1784 standard Equates to a category “H” rating for the gasket Having the “H” rating will allow customers to use the gasket in door assemblies that are rated for smoke and draft (an “S” rated door system).   Maintenance: Weather Strip Seals are an maintenance item. You should replace your weather strip periodically once it’s worn out so doors seal properly. Lifespan of weatherstripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window.

Read more less

Part Number 936 - Flex Weather Strip For Out Swinging French Patio DoorColors: White, Sand and BronzeSize: 7 foot pc8 foot pc available for special order please e-mail info@WindowPartsCenter.com to order This weather strip is sold by the stick - DOES NOT COME IN A ROLL Known to have been used on Hurd and Sierra pacific doors

Read more less

Part Number 881 GU Multi Point In Swinging Door Strike Colors:  Stainless Steel and Oil Rubbed Bronze  Discontinued colors: All other colors below have been discontinued and no longer available. Any stock we still have is AS IS no return. Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

Part Number 837 Adjustable Oak Threshold For Hurd Clad & Wood In swing Patio Doors. Built 1988 thru 1994Thresholds will not fit tight end to end as there needs to be a small gap on both sides for water weep purposes. - Old weep system threshold.Size:2-6 Size = Threshold is 27 7/8 Inch Long2-8 Size = Threshold is 29 7/8 Inch Long3-0 Size = Threshold is 27 7/8 Inch Long INSTRUCTIONS FOR P#837 To remove old threshold: Use a #3 Philips bit on your drill - to unscrew the screws on the top of the old oak threshold all the way. Once screws are completely removed the old threshold will pull up. There are T nuts in a T track underneath the threshold that the screws screw into. You can reuse the old T nuts or replace the T nuts in the T track with the new T nuts provided with the new threshold To replace the T nuts – you will remove the old T nuts by sliding them out of the track – there should be a space at one of the ends of the track for you to do this. Take new T nuts and slide them into the track through the same space at one of the ends of the T track. Replace with new threshold by aligning the T nuts to the screws in the threshold. Screw in all screws into the T nuts below – be careful not to over tighten – and the screws are used to adjust the threshold as well. Adjusting the Threshold: Once the threshold is installed and all screws are screwed into the T nuts - the threshold can be adjusted by tightening or loosening the screws. Tightening screws to lower the threshold or loosening the screws to it rise up. Known Part Number: 203516, 203515, 203514, HHPD43

Read more less

Pine Wood Glazing Bead Sold In 6' or 7' For large bulk pricing please email us at Info@WindowPartsCenter.com for details

Read more less

Part Number MT063 Hurd Hinged Screen Door Replacement handle - Rite Screen Screen  Screen Door Handleset with Mortise Box Black only Works on Hurd Rite Screen hinged screen doors and other brands (single door) Instructions included  Price includes free standard shipping  Limited quantities available 

Read more less

Part Number: 847 GU Sill Strike Plug for swinging doors  Style: Standard and ADA No Screws Included: Factory Recommends using: #6 x 3/4 Inch Associated Parts Sold Separately:  848 - GU Sill Strike Gasket For Swinging Doors  Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

Part Number 879 Aluminum Screen Channel Sold in 6 foot lengths only  1 pc = QTY 1 @ 6 foot each 2 pc = QTY 2  @ 6 foot each 5 pc =QTY  5 @ 6 foot each Dimensions: ½” x 3/32” x 6’ Can be used on older Hurd Swinging Patio Door with Sliding Screen where the original bronze Screen Channel is no longer available. (see pictures) 

Read more less

Part Number 964 - Nailing Fin Corner Pad  window installation supplies For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)  Sold In: Set Of 4 as shown in picture  Color: Black Stick On

Read more less

Part Number: 856-857-858 GU Active Multi Point - 2006 - Current Product for Hurd and Sierra Pacific WI Product Review size sheet to know what to order. If measurements do not match your GU hardware then this will not work on you door. Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.

Read more less