Hurd Windows & Doors Replacement Parts and Hardware

Part Number  823 GU 7/8 inch Door Handle Extension 3/4 inch Includes new Split Shaft choose size for your door (handle sets NOT included)  This 3/4 inch extension only works on GU handle sets that have  7/8 inch lever hole see pictures for examples to compare with your handle set. If your faceplate lever hole is smaller these extensions with  NOT work. Verify before you place your order  size  1.71 - split shaft is 4 25/32 inch long (approximately 4 3/4 inch )  2.25 - spit shaft is 5 17/32 inch long (approximately 5 1/2 inc long new split shaft is needed to accommodate the additional extension  Available Finish Colors:  Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze  White  Lead Time can be up to 6 weeks   Associated Parts Sold Separately: Part number  840 - GU Active Handle Set For GU Multi Point Hardware split shafts 829 Extensions 884

Read more less

Part Number 824 Finned Corner Seal For Swinging Patio Doors Known to have been used in Hurd Doors and more   

Read more less

Part Number 825 Hoppe Single Point Gear Box as shown in pictures and in product video **** 825 Single point gear box is not interchangeable with multi point gear box system interior components are different see video**** In stock: Only part # 825-D which has a 1 3/4" Backset and 1" Dead Bolt Throw Special Order: All other part numbers are special order items (no returns or order cancellations) and can have a 1-4 week lead time once you place your order.   Handing: Non handed - Strike is reversible for both left hand and right hand doors (see video below or revering latch instructions)  Install Instructions: Remove set screws on handle levers and remove Remove mounting screws on faceplate estuation of the handle set On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation

Read more less

Part Number: 826 New Style. Direct Replacement for 826 Old Style (See video) Amesbury Truth E-Lon .825 Compression Seal Swing Door Kerf Weather Strip Foam Seal Black Size: 4 foot or 12 foot long White and Bronze Size:  97 inch long Only No returns for special order items, all sales final Custom Orders: Custom sizes / colors available upon request. Minimum order of 24,000 feet would be required please email info@windowpartscenter.com for quote - no returns for custom orders. All sales final SERIES 12604 PRODUCT APPLICATIONSCompression Seal / Swing Door MATERIALClosed cell foamThermoplastic Elastomers (TPE’s)Rigid kerf material KERF WIDTH.125” (3.175mm) KERF DEPTH.50” (12.7mm) COMPRESSION50% (+10/-40) RABBET DEPTH2.125” (54mm) COMPRESSION SET (AAMA 702 test method)Less than 9% when compressed @75% 22 hours @ 158F (70C) WATER ABSORPTIONFloat - 0.4% , 1” Wick - 1.0%, Submerge - 5.4% INSTALLATIONSame profile seals the strike side, hinge side, and header.Installs easily in most out of spec kerfs. FIRE AND SMOKE RATINGS UL certification for 20 minute fire rating Equates to a category “J” rating UL certification to 1784 standard Equates to a category “H” rating for the gasket Having the “H” rating will allow customers to use the gasket in door assemblies that are rated for smoke and draft (an “S” rated door system).   Maintenance: Weather Strip Seals are an maintenance item. You should replace your weather strip periodically once it’s worn out so doors seal properly. Lifespan of weatherstripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window.

Read more less

Part Number 827 - SOLD Individually  Hoppe Backplate Bushing  -  (handle set or other parts not included) This Hoppe Backplate Bushing is for Hoppe Swinging Patio Doors System ONLY. Color: Clear Gold Opaque  HANDLE BUSHING HFW F12 BACKPLATE MANUFACTURER: A/35/14 914 RL 750 16S 85 Used on Hurd handle set from 2004 and prior - See picture to match your handle set to correct bushing kit for Hurd DoorsThis Hoppe Backplate Bushing is for Swinging Patio Doors System ONLY.  

Read more less

Part number 828 Hoppe Door Handle Extension  Special Order NO Returns - 3-5 week lead time Split shaft sold separately 

Read more less

Part Number: 829 Hoppe Split Shaft only screws sold separately (See Part Number: 840-031 Set Screws or S3004 - metric 6-10) Shaft Size Order By Length:  3 15/16 inch ( 5/16 inch x 3 15/16 inch or 8 mm x 100 mm) For Doors Smaller 1 3/4 inch thick Can be used as a replacement split shaft for old GU handle sets 4 21/64 inch (5/16 inch x 4 21/64 inch or 8mm x 110 mm) For Doors Smaller than 1 3/8 inch thick 4 11/16 inch (5/16 inch x 4 11/16 inch or 8 mm x 120 mm) For 1 3/4 Thick Doors Commonly used on Hurd and Truth hardware 5 1/2 inch (5/16 inch x 5 1/2 inch or 8 mm x 140mm) For 2 1/4" thick doors 6 1/4 inch (5/16 inch x 6 1/4 inch or 8 mm x 160 mm) used with the 1" Hoppe Handle extension part # 828 sold separately Commonly used on Hurd and Truth hardware that has extension 828   See figure F in drawing for correct split shaft spindle position installation.  Associated Parts Sold Separately:  6 1/4 is used with the 1" Hoppe Handle extension part # 828 Part Number: 840-031 Set Screws pack  Part number S3004 - metric 6-10 screws

Read more less

830 - Replacement Schlage Keyed Cylinder Keyed Cylinder - Random KeyedYou can Select Keyed Alike if you are ordering QTY 2 or more cylinders and you want them to be keyed the same. Add's $15 per cylinder. This may add 1-2 week lead time before order is shipped out.Over all length: 3 1/4”Shaft Length: 1 7/16" - customer can cut down shaftCylinder Length: 1 1/4"Face Width 9/16" Wide Pro Tip: If after you tighten the handle and the dead bolt won’t lock or unlock or really hard to turn the tail part is too long and needs to be snipped down. See directions in pictures above. Grooves are on tail part to be snipped down so it can be used on multiple thicknesses of doors. 

Read more less

 #833 - Hoppe 3Pt Convertible Under plate - Bright Brass     Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors     Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #834 - Hoppe 3Pt Striker For Rollers - Auto      

Read more less

#834 - Hoppe 3Pt Striker For Rollers - Auto - Bright Brass Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #833 - Hoppe 3Pt Convertible Under plate    

Read more less

Part Number: 835 4" x 4" Ashland Horizontal Guide Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" ADJUSTABLE HORIZONTAL DOOR HINGES Handing: Non Handed remove the pin and flip to reverse handing see video below. For the Mate Vertical Hinge see part number 836   Low Stocked Item - May have a 2-3 week lead time KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated product Sold Separately: Part Number 836 Set Hinge Screw Pack 835/836Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Hinge Pin Video:

Read more less

Part Number: 836  4" x 4" Ashland Vertical  Set Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" VERTICAL ADJUSTABLE DOOR HINGES For Mate Horizontal Hinge See Part Number 835  Low Stocked Item - May have a 2-3 week lead time Handing: Non Handed - see video below. Remove pin and flip to reverse handing KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated Product Sold Separately:  Part Number 835 Guide Hinge Part Number 835/836 Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Pin

Read more less