As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
845 Amesbury Truth Loft Dummy Swinging Patio Door Handle Set.
Discontinued Product - What we have in stock is all that is available. No returns.
Part Number: 846
GU Head Strike Plate, Semi Active French Swinging Door
Stainless Steel
Screws Not Included
Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.
Part Number: 847
GU Sill Strike Plug for swinging doors
Style: Standard and ADA
No Screws Included: Factory Recommends using: #6 x 3/4 Inch
Associated Parts Sold Separately:
848 - GU Sill Strike Gasket For Swinging Doors
Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.
Part Number: 848
GU Sill Strike Gasket For Swinging Doors
sold individually- see chart for bulk pricing
Color: Black
Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.
Associated parts Sold Separately:
Part Number 847: Sill Sill Strike Plug
Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.
852 - Handle Set for 6" Center to Center Bore
Colors: Bright Brass, Satin Nickel, Oil Rubbed Bronze*, Polished Chrome**, White**
*Color AS IS: Oil Rubbed Bronze Type Finish (ORB). We will not accept returns on it for any reason for this finish as the manufacturer will not accept returns. See finish note below. When you place your order for ORB you are agreeing to these terms for the ORB item.
**Discontinued Colors: White and Polished Chrome. Once our stock is gone these colors will no longer be available
Fits 2 1/8" Crossbore on 6" and 6 3/32" bore Centers. Can also be used on doors with 1 3/4" Crossbore. The lockset includes removable posts.
2 3/8" Back Set
Mounting Screw Holes 6 1/16" center to center
Durable Finish
Fits Right or Left Hand doors
East to install with Phillips screwdriver
Known to work on Weather Shield, and Hurd, Peachtree Swinging Patio doors and replacement for W&F handle set with 6" Center to Center Bores.
Tools Required for Install: Philips Screwdriver and Slotted Screwdriver.
Detailed Installation Instructions Enclosed.
Keyed and Keyed Alike:
Standard: All handle sets come random Keyed with 2 Keys.
You can order as Keyed Alike for a small upcharge per handle. For 2 or more handle sets you can have all of the handle sets come keyed the same. (Example if you order QTY 4 handle sets you will also need to add QTY 4 keyed alike to to your under found under accessory items)
Allow an addition 1-2 weeks for keyed alike handle sets to ship
We CAN NOT rekey handle sets to any existing keys you the customer may have for your home, you the customer would need to hire a lock smith for that.
Known to have been used on: Replacement for Peachtree Part # 06200031. and is a replacement handle set for Hurd, Jeldwen, Caradco "Hallmark Leverset", and replacement handle for 6" center to center bore handle sets for Hurd, W&F Weather Sheild an more.
Known Part Numbers: 1200, 12001-1, 1200-1, 40061999, PAT NO's 4,671,089 D295,829, 14421-WR. Part # 06200031
*Finish Notice For Oil Rubbed Bronze Type: Has NO manufacture warranty on finish. All products are sold new and inspect with pictures taken for quality control before they are shipped out. Oil rubbed bronze (ORB) is a "living finish," meaning it's designed to change and develop a patina over time due to wear and environmental factors. This wear is a natural characteristic of the finish, not a defect, and is often what gives it its appeal. The finish will naturally lighten and reveal underlying tones of brass or copper as it's used and exposed to elements. This wear can happen more rapidly in harsh weather, sun, moisture, sea cost areas and excessive use.
**Warning** Do NOT use a power driven tool to attach the handle set face plate retaining screws...thread damage can result and is NOT considered a product defect.
No returns will be accepted if when inspected product has thread damage and not in new condition.
NOTE! 852 only works for 6 inch center to center bore and 6 1/16 inch center to center mounting screw holes, 2 1/8" standard double double bore with latch and dead bolt (see video and pictures with dimensions). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or 2 1/8" multipoint bore and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )
*Additional Finish Manufacturer Warranty info: Warranty is for original consumer/purchaser Proof of product purchase is required. For Bright Brass and Stain Nickel have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.
Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.
Part # 854Foam Weather Strip For Q-Lon Out Swinging French Patio DoorColor: White, Sand or BronzeSize: 6', 8', 12' = All shipped Rolled
Bulk Pricing:
1 Pack = QTY 1 @ selected size
2 Pack = QTY 2 @ selected size each
5 Pack = QTY 5 @ Selected size each
Known to have been used on Hurd and Sierra Pacific Doors
Part Number 855
Single Point GU Gear Box Hardware* Schlosskasten Security / Schlossk. Sec.
*Single point gear box is not interchangeable with multi point gear box system interior components are different.
For Swinging Patio Doors
Depending on vintage your sticker label color can be orange or white with the following numbers:
Orange Label:
6-29377-45-0-1 A
45-92-8 or 45-92-8 EINST.
White Label:
6-29377-45-0-1 B
Scholssk.Sec.U 45/92/8
Handing: Strike is reversible for both left hand and right hand doors. See video on how to reverse the latch
Brands known to been used on: GU, Hurd, Sierra Pacific and More.
Install Instructions:
Remove set screws on handle levers and remove
Remove mounting screws on faceplate estuation of the handle set
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
*Single point gear box is not interchangeable with multi point gear box system interior components are different.
updated 7/18/23
Part Number: 856-857-858
GU Active Multi Point - 2006 - Current Product for Hurd and Sierra Pacific WI Product
Review size sheet to know what to order. If measurements do not match your GU hardware then this will not work on you door.
Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.
Part Number; 861
Door Bottom Seal / Door Sweep Color: Bronze OnlySize: 29 7/8 inch, 60 inch and 72 inch Long pcs only (samples can not be returned)
Brands Known to be used on but not limited to: Hurd Out Swing Energy Saver Patio Doors and other door brands.
Part Number: 862
Construction Handle for GU, Hoppe and W&F Brands - Special Order NO Returns
During construction use the construction handle on your patio doors and save your nice handle sets from getting damaged.
Part Number: 863 Adjustable Threshold Plastic For Hurd In Swinging DoorMaterial: White PVC (paintable) or Wood Oak - Will need to be stained.Dimensions: 1 3/4" x 1/2" x 36"Only Sold in 36" lengthComes with: Threshold, 4 Screws and Nuts, Foam863 is the Old Style that came before part # 837 but these are NOT interchangeable.#863 Directions for Installation:1. #863 comes in 36" length - customer will need to cut to size to fit their size door if smaller than 36” wide.2. You will need to use your old Threshold as a template to drill screw holes in proper place in your new #863 threshold3. Please transfer the metal supports that are located on the bottom of your old threshold that are held on by the adjustment screws. You will use these supports for your new #863 threshold along with the new adjustment screws. (Metal supports are discontinued item and no longer manufactured).4. Tighten screws as needed to adjust up or down
