Part Number: 961 - Folding Nailing Fin
Sold: Individually
Size:
5 or 6 foot lengths
Once stock of 5 foot runs out only 6 foot will be available to order
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
For runs longer than 6 foot the nail fin can be pieced together in the frame.
Nail fin has hinged Kurf that folds at 90 degrees for ease of installation. Manufacturers like Hurd Used on head and sides of windows but can be used on all 4 sides of the window for reinstallation of windows.
Known to be used on Head & Side of Hurd and Sierra Pacific windows.
024194, 961
963 - Offset Nailing Fin For Sliding Patio Door
Color: White or Gray (white is the old color, they are now manufactured in gray)Sold: individually
Size:
6 foot long length.
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples.
For runs longer than 6' the nail fin can be pieced together in the frame.
this nail fin is a for a sliding patio door it gives you a 1/2 inch offset. as sliding doors like Hurd and Sierra pacific have a wider frame jamb. Nail fin pushes the nosing out so the door frame stays flat on the inside of the wall.
Known to be used on sides and head of Hurd and Sierra Pacific Sliding Patio Doors.
P/N 692 used along bottom sill.
Part Number 964 - Nailing Fin Corner Pad
window installation supplies
For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)
Sold In: Set Of 4 as shown in picture
Color: Black
Stick On
part number 791
Window Grid Retainer - once old style stock is gone the bee style will automatically ship in its place Sold In Packs of 2
Color: Clear7/8" Slide Pin - Regal Double ProfileFor Hurd Windows, Prime-Line and other Window Brands with removable grille surrounds
part number stamped on new style: W8733
Part Number: 980
VINYL Double Hung Block Tackle Pivot Bar
Sold Individually
Dimension: 2.5 inch long x 5/16 inch wide x 3/16 inch thick
Stamped on Bar: 265 A
Known to have been used on: Hurd VINYL Double Hung Window ONLY Block & Tackle Pivot Bar, and other window brands
Part # 981
Replacement Screen Track for Vinyl Sliding Patio Door
Screen Track Sizes: 6-0 footMeasurements: 5/8" W x 9/16" H
Known Part Numbers and Brands Used on: 981, V00062, Hurd Monument Vinyl Door and More
Part Number: 987 -
Roto Vinyl Casement Window Lock Only*
Dimensions: 4 1/2" x 3/4"Center to Center Measure: 3 7/8"
Color: White or black
Lock used with a tie bar or lock link application (sold as lock only not sold with tie bar or lock link).
*If you need the link lock it is sold separately see part number 999
Part Number 999 is a link lock accessory. This accessory link allows you to replace your old style lock (see pictures) that is no longer manufactured to the current version. To successfully retro fit the new lock you need to order part number 999 along with part number 987 - they are sold separately)
Pictures shown are examples of how the link and the replacement style lock work together. Again they are sold separately you need to order the link lock part number 999 if you also want to receive it with the new style lock
Known Part Number: 2791, 34-182-33W, 39-940
Part Number: 989
Vinyl Window Sash Lock - Amesbury Truth Maxim Multipoint Lock with Gasket
Amesbury Truth Casement and Awning Window Replacement Sash Lock
Color:
White
Beige
Size:
Comes in 3 styles which is the "A" measurement on the drawing:
1-25/64 Inch
1-41/64 Inch
1-57/64 Inch
Screw Hole Center to Center Measurement is 3 13/16"
Screws not included. Factory recommended screws Qty 2 #10-24 PH PH thread forming machine screw.
Associated Parts Sold Separately:
984 - Amesbury Truth Window Lock Back Support Plate
Used On: Amsbury Truth, Hurd Monument Vinyl and many other vinyl window brands
known part number: 24.30, 24.31 and 24.33
Part Number: 999 - Link Lock Accessory Onky
NOTE: lock sold separately see part number 987
Color: Aluminum
Sold Individually
Part Number 999 is a link lock accessory. This accessory link allows you to replace your old style lock (see pictures) that is no longer manufactured to the current version. To successfully retro fit the new lock you need to order part number 999 along with part number 987 - they are sold separately
Pictures shown are examples of how the link and the replacement style lock work together. Again they are sold separately you need to order lock part number 987 if you also want to receive the new style lock
Known associated Part Number: 2791, 34-182-33W, 39-940