Peachtree Doors and Windows Replacement Parts and Hardware

Part Number 215   Manual Window Wand For Clear Story Windows Special Order Item - NO RETURNS or Order Cancellations  - due to material shortages lead times are longer then normal expect a minimum of 12 weeks for your order to ship. We will update with better lead times as soon as the factory lets us know.  Put those operable clearstory windows to energy-saving use with our clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (see Hex-Bolt part number 216 and 217 sold separately) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator. Remember that you will only need one clerestory crank to operate all windows at the same height. Color: natural anodized aluminum  Size:  is the length of the Wand or Crank Length. (see Chart below) Styles available: Sill Mounted or Jamb Mounted (see picture or video)  You must buy corresponding adapter to use wand (sold separately) . See part # 216 or # 217  Don't know what size to order?  Distance from floor is the measurement from the floor to the window. Example if the distance from the floor to the window is 7' then its advised to get a 3' wand or Crank length. See Chart Below for factory recommendations on length. Chart: Distance From floor 7 foot = Factory Recommends 3 foot Crank LengthDistance From floor 8 foot = Factory Recommends 4 foot Crank LengthDistance From floor 9 foot = Factory Recommends 5 foot Crank LengthDistance From floor 10 foot = Factory Recommends 6 foot Crank LengthDistance From floor 11 foot = Factory Recommends 7 foot Crank LengthDistance From floor 12 foot = Factory Recommends 8 foot Crank LengthDistance From floor 13 foot = Factory Recommends 9 foot Crank Length (KD)*Distance From floor 14 foot = Factory Recommends 10 foot Crank Length (KD)*Distance From floor 16 foot = Factory Recommends 12 foot Crank Length (KD)* *KD = Knocked Down (wand shipped in 2 pieces and you have to screw them together) see assembly instructions in pictures. Parts sold separately: Part Number 216 - Crank Handle Adapter for ClereStory Windows "Female" Part Number 217 Clear Story Manual Window Wand Crank Adapter "Male"

Read more less

Part Number: D301* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.  W&F Trilennium 6 Inch CTC multipoint bore D301 is the new Replacement Handle Set - - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns  D301 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" cross bore Screw Hole Placement: 5 3/16" Center To Center  Model: D301 Standard Set** Size: for Door Panel Thickness 1 3/4" or 2 1/4" Colors:  Victorian Bronze, Satin Nickel, Bright Brass Handing: Universal  - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior  Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates this is used with the newer style multi point see pictures for lever degree diagram). Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever* For Inactive panels in French doors that has 3020 lock installed only Active Modified 180° Option (Add-On) This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.) How to order:This is an additional add-on and must be selected under “Accessory Items.” If you order 1 handle set → add Qty 1 of the 180° modification If you order 3 handle sets → add Qty 3 of the 180° modification Each handle set that needs this modification requires its own quantity. Notes for other options for this style hardware on older doors: D301 handle set is manufactured to be used with the current multipoint system and will work with it for you right out of the box - you will order Active Standard 150 Degree (see pictures for lever degree diagram and associated parts below). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then you will order Active Modified 180 Degree to with with either of these two options (see pictures for lever degree diagram and associated parts below). If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock itmes - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately: S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock For the Current Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate      

Read more less

Part Number: S1091  In stock Casement Window Lock Latch Color: White or Driftwood    

Read more less

Part Number: S1013 Replacement Peachtree Casement Operator Crank Handle 9/32 inch Spline Color: Driftwood White Bright Brass (plated)  Bright Brass is Special Order item allow 4 weeks to ship - no returns or order cancellations on specials order items    This crank handle goes onto casement window operator part # S1012 which is sold separately. 

Read more less

Part Number: S2024 Swinging Door Frame Large Kerf Weather Stripping Adapter Kit   Made to fit approximately 1/4 inch to 3/8" kerf size Each Kit Includes: QTY 3 Adapters and QTY 3 Bronze, Brown, or Black Weather Strip Seals (to do both sides and head of 1 door frame)  Color is totally dependent upon what the factory manufactures during each mass production. Length:  82 inches per pc (cut to fit your door width and length). Color: Bronze Bulk Discount Applied In My Cart: QTY 2-5 10% QTY 6-9 20% QTY 10+ 30% Used as replacement option for Peachtree Entry Doors, early Prado series and more.  For 8 foot tall doors please email or text for quote  

Read more less

Part Number: D302* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.  W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black Handing: Universal  - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Active Modified 180° Option (Add-On) This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.) How to order:This is an additional add-on and must be selected under “Accessory Items.” If you order 1 handle set → add Qty 1 of the 180° modification If you order 3 handle sets → add Qty 3 of the 180° modification Each handle set that needs this modification requires its own quantity.   Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case bases by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

Read more less

Part Number: S1012 Peachtree Non-handed Casement Crank Operator Drag Link Used on peachtree casement windows.  Handing: Non Handed Style: Sill Mounted  Color: Black ***Crank handle sold separately see part # S1013***

Read more less

Part number S1094 Color: Bronze Overall Dimensions: 1 Inch Wide x 1/2 Inch tall Length: 70 inches lengths (shipped straight can not roll) 70 inches = 1 pc  peachtree ariel casement and awning frame weather stripping  kurf weather stripping 

Read more less

Part Number: 533 Manufacture: Amesbury Truth Known to have been used on:  For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts Old Style Stamped on part: 2153 Works as a replacement option for W&F keeper that has been discontinued   

Read more less

Part Number: S3023 Patio Door Roller Assembly 1 1/4 inch Steel Wheel PDR 40 (C) Featuring a 1 1/4 inch Steel Wheel PDR 40 (C), the S3023 Patio Door Roller Assembly offers a reliable and steadfast solution. Material (housing): Stamped Steel or Stainless Steel Wheel Size: 1-1/4 Inch Wheel material: Steel Number of wheels: 1 Sold Individually Known to have been used on Peachtree Citation Top panel guide rollers are recommended when replacing bottom panel rollers Part Number S3024

Read more less

Part # 210 - Amesbury Truth 11 Series (11.14) Awning OperatorWhite and Bronze are special order items. No returns. 3-4 week lead time. Known Part Numbers: 210 U.S. PAT. 4505601, PAT, CAN. 1986, 45301 Known Brands: For larger Hurd awning windows built prior to 1988., Weather Sheild, BiltBest, Truth, Amsbury Truth, 11 Series (11.14),   11-14-32-001 Steps in the below video are very similar when you are replacing part number 210 awning operators.

Read more less

Part number: S1095 Color: Bronze Length: 70 inches lengths (shipped straight can not roll) Overall Dimensions: 3/8 Inch x 1/2 Inch 70 inches = 1 pc Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples Peachtree ariel casement and awning sash weather stripping  Leaf weather stripping 

Read more less