Peachtree Doors and Windows Replacement Parts and Hardware

Part Number: S4112 W&F Multipoint Mortise Lock  2-3/8IN BACKSET For 6 Inch handle  Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875 Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.  Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base. This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002]. Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise. DO NOT TAKE APART THE MORTISE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTISE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT. Associated Parts Sold Separately: S4112TK - Alignment Key Tool - System Rod Timing Key D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock  

Read more less

Part Number 211 Truth 11 Series (11.12) Awning Short Arm Operator Single Pull - 16 1/4 Wide Colors In Stock: White, Bronze and New Goldtone  Special Order Color: Clay, Beige and Goldtone are special order item. 1-4 week lead time No Returns Known to be used on Hurd Brand Windows with glass widths: 19 & 23, this part has been used on many other window brands such as Weather Sheild, Caradco, Biltbest and more. Associated Parts Sold Separately:  Part Number 139 Crank Handle  Part Number 135 T Handle  Part Number 108 Knob Handle Part Number 218 Center Hook  Below video shows how to replace an awning operator. Steps are very similar when you are replacing part number 211.  Known Part Numbers: 211, U.S. PAT. 4505601, PAT. CAN. 1986, 4530, 30896, 11-12-32-001        

Read more less

Part Number 215   Manual Window Wand For Clear Story Windows Special Order Item - NO RETURNS or Order Cancellations  - due to material shortages lead times are longer then normal expect a minimum of 12 weeks for your order to ship. We will update with better lead times as soon as the factory lets us know.  Put those operable clearstory windows to energy-saving use with our clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (see Hex-Bolt part number 216 and 217 sold separately) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator. Remember that you will only need one clerestory crank to operate all windows at the same height. Color: natural anodized aluminum  Size:  is the length of the Wand or Crank Length. (see Chart below) Styles available: Sill Mounted or Jamb Mounted (see picture or video)  You must buy corresponding adapter to use wand (sold separately) . See part # 216 or # 217  Don't know what size to order?  Distance from floor is the measurement from the floor to the window. Example if the distance from the floor to the window is 7' then its advised to get a 3' wand or Crank length. See Chart Below for factory recommendations on length. Chart: Distance From floor 7 foot = Factory Recommends 3 foot Crank LengthDistance From floor 8 foot = Factory Recommends 4 foot Crank LengthDistance From floor 9 foot = Factory Recommends 5 foot Crank LengthDistance From floor 10 foot = Factory Recommends 6 foot Crank LengthDistance From floor 11 foot = Factory Recommends 7 foot Crank LengthDistance From floor 12 foot = Factory Recommends 8 foot Crank LengthDistance From floor 13 foot = Factory Recommends 9 foot Crank Length (KD)*Distance From floor 14 foot = Factory Recommends 10 foot Crank Length (KD)*Distance From floor 16 foot = Factory Recommends 12 foot Crank Length (KD)* *KD = Knocked Down (wand shipped in 2 pieces and you have to screw them together) see assembly instructions in pictures. Parts sold separately: Part Number 216 - Crank Handle Adapter for ClereStory Windows "Female" Part Number 217 Clear Story Manual Window Wand Crank Adapter "Male"

Read more less

Part Number: D301* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.  W&F Trilennium 6 Inch CTC multipoint bore D301 is the new Replacement Handle Set - - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns  D301 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" cross bore Screw Hole Placement: 5 3/16" Center To Center  Model: D301 Standard Set** Size: for Door Panel Thickness 1 3/4" or 2 1/4" Colors:  Victorian Bronze, Satin Nickel, Bright Brass Handing: Universal  - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior  Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates this is used with the newer style multi point see pictures for lever degree diagram). Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever* For Inactive panels in French doors that has 3020 lock installed only Active Modified 180° Option (Add-On) This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.) How to order:This is an additional add-on and must be selected under “Accessory Items.” If you order 1 handle set → add Qty 1 of the 180° modification If you order 3 handle sets → add Qty 3 of the 180° modification Each handle set that needs this modification requires its own quantity. Notes for other options for this style hardware on older doors: D301 handle set is manufactured to be used with the current multipoint system and will work with it for you right out of the box - you will order Active Standard 150 Degree (see pictures for lever degree diagram and associated parts below). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then you will order Active Modified 180 Degree to with with either of these two options (see pictures for lever degree diagram and associated parts below). If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock itmes - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately: S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock For the Current Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate      

Read more less

Part Number: S1091  In stock Casement Window Lock Latch Color: White or Driftwood    

Read more less

Part Number: S1013 Replacement Peachtree Casement Operator Crank Handle 9/32 inch Spline Color: Driftwood White Bright Brass (plated)  Bright Brass is Special Order item allow 4 weeks to ship - no returns or order cancellations on specials order items    This crank handle goes onto casement window operator part # S1012 which is sold separately. 

Read more less

Part Number: S2024 Swinging Door Frame Large Kerf Weather Stripping Adapter Kit   Made to fit approximately 1/4 inch to 3/8" kerf size Each Kit Includes: QTY 3 Adapters and QTY 3 Bronze, Brown, or Black Weather Strip Seals (to do both sides and head of 1 door frame)  Color is totally dependent upon what the factory manufactures during each mass production. Length:  82 inches per pc (cut to fit your door width and length). Color: Bronze Bulk Discount Applied In My Cart: QTY 2-5 10% QTY 6-9 20% QTY 10+ 30% Used as replacement option for Peachtree Entry Doors, early Prado series and more.  For 8 foot tall doors please email or text for quote  

Read more less

Part Number S1048 Amesbury Truth Casement Dyad Operator Without or with Detach Clip Square Housing has been discontinued by manufacturer. You will receive the new Ellipse style housing for this operator as shown in picture Operators are handed. View pictures to determine what handing you need to order. Handing: Left Hand or Right Hand Colors: White, Goldtone, New Goldtone and Bronze Option: No Detach Clip or With Detach Clip S1105 Special order item no returns. Lead time 1-3 weeks Known part number: 31850 Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 111 - Truth/Wright Split Arm Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit  

Read more less

Part Number: D302* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.  W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black Handing: Universal  - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Active Modified 180° Option (Add-On) This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.) How to order:This is an additional add-on and must be selected under “Accessory Items.” If you order 1 handle set → add Qty 1 of the 180° modification If you order 3 handle sets → add Qty 3 of the 180° modification Each handle set that needs this modification requires its own quantity.   Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case bases by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

Read more less

Part Number: S1012 Peachtree Non-handed Casement Crank Operator Drag Link Used on peachtree casement windows.  Handing: Non Handed Style: Sill Mounted  Color: Black ***Crank handle sold separately see part # S1013***

Read more less

Part Number: 533 Manufacture: Amesbury Truth Known to have been used on:  For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts Old Style Stamped on part: 2153 Works as a replacement option for W&F keeper that has been discontinued   

Read more less