Pella

16 products


  • 190 Wrench for Adjustable Hinge Tracks - Truth Hardware Wrench For Adjustable Hinge Studs 7/16" and 3/8" Wrench for Casement Hinge - Milgard Adjustment Wrench Part Number HA6806MI part number 31887, V982164 Adjustable Stud Hinge Wrench, 8/10-4/18

    190 Wrench for Adjustable Hinge Tracks 31887 14 Series Casement Hinges- Truth Hardware Wrench For Adjustable Hinge Studs

    1 review

    15 in stock

    Part Number: 190 In Stock! Free Shipping!  Amesbury Truth Wrench for 14 Series Casement Hinges that have Adjustable hinge tracks -  Truth Hardware Wrench For Adjustable Hinge Studs - Low Profile Adjustable Stud Hinge Wrench, 8/10-4/18 This wrench only works on Truth adjustable hinges as shown in the pictures. If your hinge don’t look exactly like the picture shows this wrench will not work on your hinge (please scroll thru all pictures to compare with your hinge).  Wrench Size is: 7/16" on the straight side and 3/8" on the angled side - Number on part 31887,  For adjusting Hinge part #s 121, 122.  Adjustment Instructions For Sash Drag:  Remove Screen Open the window Slip the adjustment wrench onto the base of the stud, found between the support arm and the track of the lower hinge. Rotating the wrench away from the lock side of the window will decrease the amount of sash drag. The maximum sash drag adjustment is reached when the stud flats are parallel to the track. For severe sash drag, a similar procedure can be used on the upper hinge.  Upper hinge adjustment is made by rotating the wrench toward the lock side of the window. Maximum adjustment is obtained when the stud flats are parallel to the track. Close and open window to check for proper adjustment. NOTE: Turning the stud flats beyond parallel will not increase sash drag correction. maximum adjustment may cause binding as the window is closed. Please use caution. Use Proper PPE (gloves safety glasses) when preforming repair and maintenance tasks. If you feel you are not able to preform repair and maintenance tasks contact a local window service technician in your area.   Known Part Number: HA6806MI, 31887, V982164

    15 in stock

    $ 17.00

  • 216 - Crank Handle Adapter for ClereStory Windows "Female"

    216 - Crank Handle Adapter for Clear Story Windows "Female"

    10 in stock

    Part Number: 216 Crank Handle Adapter 5/8 Inch Hex Femail used with  Clear Story  Windows Size: Spline Size see list below 11/32 Spline Fits: Truth (Amesbury Truth): Marvin, Some Milgard, Caradco, Weather Shield, Hurd, BiltBest, Eagle, Vetter, Roto X Drive and Others 9/32 Spline Fits Peachtree and Getty 3/8 Special Spline Fits: Pella 3/8 Special Spline Fits: Anderson 3/8 Spline Fits: Some Milgard and Others Finish: Mill (Special order colors email for pricing: White, Black and Champagne)  Put those operable clerestory windows to energy-saving use with our 39-series clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (Hex-Bolt) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator.The removable extension crank is available in many standard sizes for either sill or jamb mounted operators. (See Manual Window Wands) The standard finish for the crank is natural anodized aluminum.

    10 in stock

    $ 16.95 - $ 41.95

  • window crank extension wand

    215 Manual Window Wand For Clear Story Windows

    Out of stock

    Part Number 215   Manual Window Wand For Clear Story Windows Special Order Item - NO RETURNS or Order Cancellations  - Normal Estimated Lead time 2 - 3 weeks, but can be longer. During Busy months with high order volumes lead time can be 8 - 12 weeks. Put those operable clearstory windows to energy-saving use with our clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (see Hex-Bolt part number 216 and 217 sold separately) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator. Remember that you will only need one clerestory crank to operate all windows at the same height. Color: natural anodized aluminum  Size:  is the length of the Wand or Crank Length. (see Chart below) Styles available: Sill Mounted or Jamb Mounted (see picture or video)  You must buy corresponding adapter to use wand (sold separately) . See part # 216 or # 217  Don't know what size to order?  Distance from floor is the measurement from the floor to the window. Example if the distance from the floor to the window is 7' then its advised to get a 3' wand or Crank length. See Chart Below for factory recommendations on length. Chart: Distance From floor 7 foot = Factory Recommends 3 foot Crank LengthDistance From floor 8 foot = Factory Recommends 4 foot Crank LengthDistance From floor 9 foot = Factory Recommends 5 foot Crank LengthDistance From floor 10 foot = Factory Recommends 6 foot Crank LengthDistance From floor 11 foot = Factory Recommends 7 foot Crank LengthDistance From floor 12 foot = Factory Recommends 8 foot Crank LengthDistance From floor 13 foot = Factory Recommends 9 foot Crank Length (KD)*Distance From floor 14 foot = Factory Recommends 10 foot Crank Length (KD)*Distance From floor 16 foot = Factory Recommends 12 foot Crank Length (KD)* *KD = Knocked Down (wand shipped in 2 pieces and you have to screw them together). Parts sold separately: Part Number 216 - Crank Handle Adapter for ClereStory Windows "Female" Part Number 217 Clear Story Manual Window Wand Crank Adapter "Male"

    Out of stock

    $ 204.00 - $ 380.00

  • D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate. Current Product U.S. Pat No: 5,857,291; 6,491,326; 7,753,418; 8,182,002. Current Product Canada Pat. No: 2,562,430; 2,605,002

    D301 W&F Trilennium Multipoint 6 Inch CTC Replacement Handle Set

    Out of stock

    Part Number: D301* W&F Trilennium 6 Inch CTC multipoint bore D301 is the new Replacement Handle Set - - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns  D301 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Screw Hole Placement: 5 3/16" Center To Center  Model: D301 Standard Set** Size: for Door Panel Thickness 1 3/4" or 2 1/4" Colors:  Victorian Bronze, Satin Nickel, Bright Brass Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates this is used with the newer style multi point see pictures for lever degree diagram). Active Modified 180 Degree*- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates that is used with older multi point and double bore systems see pictures for lever degree).  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Notes for other options for this style hardware on older doors:   D301 handle set is manufactured to be used with the current multipoint system and will work with it for you right out of the box - you will order Active Standard 150 Degree (see pictures for lever degree diagram and associated parts below). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then you will order Active Modified 180 Degree to with with either of these two options (see pictures for lever degree diagram and associated parts below). If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacture warranty Warranty claims are handled on a case by case bases by the manufacture. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately: S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock For the Current Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate      

    Out of stock

    $ 300.00 - $ 465.00

  • Pella Brixwell Casement Roto Sill Mounted Operator Known Part number:  900-8866

    S1084 Pella Casement Roto Sill Mounted Operator

    6 in stock

    Part Number: S1084 Casement Roto Sill Mounted Operator (this is the current style and the replacement option for the older version. click here to see our blog for retro fit instructions provided by a customer that successfully replaced the old style with the current S1084)  Handing: Left Hand and Right Hand Brand: Pella ( Vintage 1967-1993), Brixwell Cover (part number S1025 or S1126)  and handle (part number S1085) Sold Separate  For Pella Primed All Wood and Wood/Clad Casement Windows (1967- 1993) Operator Dimensions Hole width on base 3-3/4" Arm attached to sash bracket is 6" Sash Bracket has total width of 5-7/16" Known Part numbers: 900-8866, 900-8865, S-900-866, S-900-8865, CRLH4141  

    6 in stock

    $ 199.00

  • Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate. Current Product U.S. Pat No: 5,857,291; 6,491,326; 7,753,418; 8,182,002. Current Product Canada Pat. No: 2,562,430; 2,605,002

    D302 W&F Trilennium Multipoint 6 Inch CTC Replacement Handle Set

    Out of stock

    Part Number: D302* W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black   Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Active Modified 180 Degree* - Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for older multi point and double bore systems see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacture warranty Warranty claims are handled on a case by case bases by the manufacture. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

    Out of stock

    $ 330.00 - $ 465.00

  • S1085 - Pella Crank Handle for Architect Designer 1992 to 1999 Original Pella 1991 to 1993  3/8 Inch Spline

    S1085 - Pella Crank Handle for Architect Designer 1992 to 1999 Original Pella 1991 to 1993 3/8 Inch Spline

    16 in stock

    Part Number: S1085 Pella Crank Handle  3/8 Inch Spline For Vintage: Architect Designer 1992 to 1999 Original Pella 1991 to 1993    Colors: Copperite (Bronze like color)  Champagne White Special order Non Stock Colors: Bright Brass ***Special order colors are not in stock, no returns or order cancellations***      

    16 in stock

    $ 55.00 - $ 500.00

  • Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate. Current Product U.S. Pat No: 5,857,291; 6,491,326; 7,753,418; 8,182,002. Current Product Canada Pat. No: 2,562,430; 2,605,002

    D300 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set

    Out of stock

    Part Number: D300* W&F Trilennium 6 Inch CTC multipoint bore D300 is the new Replacement Handle Set - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns  D300 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" cross bore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Bright Brass, Satin Nickel, Black Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Active Modified 180 Degree*- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for older multi point and double bore systems see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D300 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).   If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacture warranty Warranty claims are handled on a case by case bases by the manufacture. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.   Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

    Out of stock

    $ 340.00 - $ 465.00

  • Last stock! S1092 Fit All Universal Folding Casement and Awning Handle Kit Includes 5 Adapters. Kit includes 1 folding handle and  5 adapters to fit spline sizes:  11/32 Inch, 5/16 Inch, 3/8 Inch, 9/32 Inch and 3/8 Inch. Will Fit Truth, Andersen, Pella, Peachtree and various old style casement and jalousie operators.

    S1092 Fit All Universal Folding Casement and Awning Handle Kit Includes 5 Adapters

    4 in stock

    Part Number: S1092 Fit All Universal Folding Casement and Awning Handle Kit Includes 5 Adapters  Kit includes 1 folding handle and  5 adapters to fit spline sizes:  11/32 Inch, 5/16 Inch, 3/8 Inch, 9/32 Inch and 3/8 Inch Special Will Fit Truth, Andersen, Pella, Peachtree, Dorchester, Yale, and various old style casement and jalousie operators.  Can have a 1-4 week lead time Colors:  White, Aluminum, Metallic Bronze, Beige (brown also available please email for pricing and lead time) This kit is perfect is you are unsure of the exact size of spline your window operator has.

    4 in stock

    $ 20.00

  • S3021 - MORTISE LOCK ROUND 45-DEGREE WITH HOOK OUT PDH 21 - Replacement Style for Adams Rite Latch Pella patio door latch

    S3021 - MORTISE LOCK ROUND 45-DEGREE WITH HOOK OUT PDH 21 - Replacement Style for Adams Rite Latch

    29 in stock

    Part Number: S3021 MORTISE LOCK ROUND 45-DEGREE WITH HOOK OUT PDH 21 S3021 is a Replacement Style for Adams Rite Latch 900-19525 that is no longer available  Style: Standard or Costal (Stainless) Known to have been used on older Pella doors Vintage 1967-1990

    29 in stock

    $ 25.00 - $ 55.00

  • S1088 Pella Architect Designer 1993 to 1999 ProLine 1991 to 2000 Casement Operator

    S1088 Pella Architect Designer 1993 to 1999 ProLine 1991 to 2000 Casement Operator

    Out of stock

    Part Number: S1088 Pella Casement Operator For Vintage:  Pella Architect Designer 1993 to 1999 Pella ProLine 1991 to 2000  Handle and Cover sold separate 

    Out of stock

    $ 134.99

  • S1126 Pella Round Operator Cover Architect Designer Proline Vintage 1995-1999 Left Hand / White

    S1126 Pella Round Operator Cover Architect Designer Proline Vintage 1995-1999

    Out of stock

    Part Number: S1126 Pella Round Operator Cover Vintage: Architect Designer Proline Vintage 1995-1999 Handing: Left Hand or Right Hand Color: Champagne, White (special order), Bright Brass Plated (Email for quote). White is a Special order items NOT stock. No order cancellation or returns on special order items. Bright Brass Plated please email info@windowpartscenter.com for quote. Associated Parts Sold Separately:  Part Number S1129 Pella Architect Designers Vintage 1992-1999 3/8 inch Spline

    Out of stock

    $ 75.00

Login

Forgot your password?

Don't have an account yet?
Create account