Part Number S4004 - Guide Horizontal Adjustable Door Hinge
Before you place your order please read below and watch our how to video at the bottom of the product page to make sure you order the correct hinge you need.
S4004 is non handed you can change the handing before you install by removing the hinge pin (see picture). For Left Hand and Right Hand Doors
Hinge is made of Steel
S4004 is a Guide Hinge - Horizontal adjustment only .
S4004 works in tandem with S4003 sold separately. See hinge placement diagram in pictures and watch our video at the bottom of the product page.
S4004 is the direct replacement and interchangeable with Hoppe Columbus 2-D Hinge part # S4002 .
Colors Available In Stock: Bright Brass, no other finishes available *See Finish Note
Discontinued Colors: Oil Rubbed Bronze, white brushed chrome, Satin Nickel, Antique Brass , Black, Polished Chrome. (if you can add to cart we still have stock. Once stock is gone colors will be NLA and will not allow you to add to cart. No returns, all sales final on discontinued colors they are sold as is and have been marked down in price for quick sale).
Other Color Finish Option: You can use as a replacement option the S4010 (it’s mate S4009) - it has multiple finishes available in stock. they do have a different screw hole pattern and the leaf leg is slightly longer so to use them you need to replace all the hinges on the door panel so it don’t bind. Link to S4010 click here****
Condition:
All hinges are NEW
To order Set Vertical Adjustment Hinge See Part # S4003
Set and Guide Hinge Placement - Also See Hinge Placement Guide Drawing:
3 Hinges Per Door Panel:
Starting at top of door Top of door
Guide (Part # S4004)
Set (Part # S4003)
Guide (Part # S4004)
4 Hinges Per Door Panel:
Anytime you need 4 hinges you would just add another guide hinge
Starting at top of door Top of door
Guide (Part # S4004)
Guide (Part # S4004)
Set (Part # S4003)
Guide (Part # S4004
Horizontal Hinge Adjustment Instructions:
Always Adjust your vertical hinge first, then adjust your horizontal hinge.
Using a Philips screw driver, adjust the panel side to side, by turning clockwise to increase margins, Turn counter clockwise to decrease the margins. Horizontal hinge has approximately 7 turns from its extremes. Automatic screwdrivers are NOT recommended. The speed of the gun may strip the heads of the screws are over adjusted.
Replacement hinge for hinges with(watch video below) Pat. Nr. 5701636, Pat. Nr. 5,701,636
Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust. Never use power tools only use hand screw driver to adjust the door so you do not strip out the adjustment screws.
Matching Screws are included with each hinge.
Known to work on: Roto, Semco Doors, Hoppe Hardware, Hoppe Columbus, Windsor Doors and Superior Doors, Loewen Doors and more
*Finish Note: Not for Coastal or High Humidity Applications. These hinges do not come in a sea coast or stainless material, high humidity or costal application can cause hinges to corrode this is not a product defect.
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU
528 - Patio Door Replacement Screen Rollers
Part Number 528 - Replacement Screen Rollers - For Sliding Patio DoorsSize: See Photos for measurements. 2 Inch Long Overall with 1" steel wheel-ball barring.Sold in: Set of 2 per pack 1 left and 1 right
In Stock: All Metal
Low QTY: White, Sand and Bronze are low stock discontinued item. If you can add to cart we have it in stock still. Once gone the all metal is the direct replacement.
Screws: Replacement screws are sold separately Click Here to add to order If you want to replace both top and bottom rollers (total of 4 rollers) you will need to purchase QTY 2 packs.
These parts are NEW- Marks found on roller adjustment are not defects. Rollers come pre packaged by the manufacturer. The “marks” you see on the sand and white adjustment are from the molds they use to make the parts and put them together. This parts were used on Hurd doors prior to 2006.Known Brands and Part Numbers: 025701, 025702, 025703, 23739000000, Hurd, Crestline, ParkVue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Peachtree Citadel Door Roller, Semco, Marvin and more.
*Note to customer* there are a wide verity of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489
Part Number 137
Truth Amesbury Encore: Tango Folding Handle and Operator Cover for Casements and Awning Operators 13342 12616
Handing: Casements can be left or right handed See pictures above, video and Pro Tip below to determine handing you need to order for your operator. Awnings operators will always will be Left Hand.
Colors: New Goldtone, Champagne (old Prior to 4/1/2024), Current Champagne (4/1/2024 to Present), Coppertone, Bronze, White, Black, Bright Brass, Polished Chrome, Brushed Chrome, Brushed Nickel, Antique Brass, Oil Rubbed Bronze, Beige
Out of stock / Pre Order Colors can have a estimated 2-6 week lead time. Price depends on finish selected. Large QTY orders may not be eligible for returns.
Pro Tip:
Left Hand = White Bag to be used with Silver Worm Operator.
Right Hand = Red Bag to be used with Gold Worm Operator.
Encore Operators Sold Separately:
Part Number: 119 Casement Encore Dual Arm Sill Mount Amesbury Truth
Part Number: 147 AmesburyTruth Encore Sill Mount Casement Operator-Dyad
Part Number: 158 AmesburyTruth Casement Sill Mount Operator-Encore-Single Arm
Part Number: 207 Awning Amesbury Truth Encore Awning Sill Mount Operator.
Proper Installation of an Operator Cover & Nested Folding Handle:
When installing the cover and handle on the operator you should follow these instructions:
• Snap the cover onto the operator base.
• Place the handle onto the spline of the operator and rotate the handle to close the window.
• Lock the window in place.
• Rotate the handle ¼ turn back (towards opening direction) to reduce the pressure on the operator
. • If the handle needs to be positioned in a nested cover you can remove the handle at this time and re-position it so that it will rest correctly in the nested cover.
• Tighten the set screw on the handle.
• Unlock the window and cycle the sash open and closed until the handle returns to the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engage and seal the window.
• If the window does not come all the way into the closed position, and more force is required on the operator to close the window, you will need to review the window for the following; sash sag; racked window; lock points that are not properly aligned; or hinges not installed correctly. These issues should be corrected prior to repeating the installation of the handle onto the operator spline.
Placing the operator and the handle under high stress and abusive loads can cause permanent failures to the handle or operator as the window is repeatedly opened and closed.
This video will show how to determine which handing to 137 cover and handle to order for your operator:
This video will show how to attached # 137 Encore Cover and handle to the # 119 Truth Encore Operator
Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.
Known Part Numbers: 137, 096357, 096358, 096353, 096354, 096354, 096356, 13342 12616, HCSE54, MONCSE675
Known to have been used on the following brands: Hurd Operator cover and crank handle (nesting) for units manufactured 9/19/05 to present, Biltbest, Sierra pacific, Semco, Windsor, Lincoln, Comfort Line, Milgard, Fiber Frame, Monarch June 2006 to present and more
Part Number 152
EntryGard (EntryGuard) Dual Arm Operator 5 17/64" (inch) Style
Handing:
Left Hand
Right Hand
View pictures and how to video below (2:40 min) to determine handing you need.
Measurements in Chart (Scroll Thru Pictures for Chart):
"A" Measurement in Drawing is 5 17/64" Circled in red in chart
"B" Measurement in Drawing is 4 7/16" circled in red in chart
The other arm sizes are available for "A" and "B" measurements which can be ordered using our links below using our factory drop ship part catalog website (scroll thru pictures to see arm option chart for part numbers and See how to video below on how to read the chart).
Styles Available :
Link Offset Up
Link Offset Down
Note: Detached clips can be revered in the field to be on top of bottom of arm. 152 will all come as Clip on the top.
Finish:
E-Gard
Handle and Cover Sold Separately See part # 139 for handle and #166 cover, S1002 Cover or upgrade to #S1004 for nesting handle and cover.
Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A, 15-63-00-002 15-63-00-001, MONCSE953, R3-2256, 53-2255
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Norco Milgard, Sierra Pacific, Allsco (1980 to Dec. 1997), Monarch Old Series and more.
Other Arm Sizes Links to Order (this is an update to our video below). Watch video to see how to read chart in pictures above to determine your A and B Measurements match part numbers on chart to links below:
Click here to order: 36-181
Click here to order: 36-182
Click here to order: 36-183
Click here to order: 36-184
Click here to order: 36-186
Click here to order 36-185
Info on our parts catalog factory direct website
Cut Sheet For EntryGard Dual Arm 15 Series
Part Number S4003 - Vertical ONLY Adjustment
Before you place your order- S4003 vertical adjustment hinges must be used with S4004 horizontal adjustment hinge (sold separately) see hinge placement guide for more details.
Adjustable Door Hinge - Set Hinge With Non-removable pin - Vertical Adjustment
Non Handed - these hinges are for Left Hand and Right Hand Doors, by removing the set screw and hinge pin and changing the handing before you install it on your door.
S4003 is a Set hinge- vertical adjustment only Pin is removable.
S4003 works in tandem with S4004 sold separately. See hinge placement diagram in pictures and watch video below.
Colors Available In Stock: Bright Brass no other finishes available *See finish note below
Discontinued Colors: Oil Rubbed Bronze, white l, Brushed Chrome, Antique Brass , Black, Satin Nickel, Polished Chrome. (if you can add to cart we still have stock. Once stock is gone colors will be NLA and will not allow you to add to cart. No returns, all sales final on discontinued colors they are sold as is and have been marked down in price for quick sale).
For Other Finish Options: You can use as a replacement option the S4009 Vertical hinge (it’s mate S4010 for horizontal adjustment) - it has multiple finishes available in stock. they do have a different screw hole pattern and the leaf leg is slightly longer so to use them you need to replace all the hinges on the door panel so it don’t bind. Link to S4010 click here****
Condition:
New - All hinges are new product
All Sales Final = any color with "All Sales Final" is a New product that has been discounted due discontinued colors All sales final No returns on as is items.
S4003 interchangeable and direct replacement for Hoppe Columbus 2-D Hinge part # S4001
To Order Guide Horizontal Adjustment Hinge See Part # S4004
Set and Guide Hinge Placement - Also See Hinge Placement Guide Drawing:
3 Hinges Per Door Panel:
Starting at top of door Top of door
Guide (Part # S4004)
Set (Part # S4003)
Guide (Part # S4004)
4 Hinges Per Door Panel:
Anytime you need 4 hinges you would just add another guide hinge
Starting at top of door Top of door
Guide (Part # S4004)
Guide (Part # S4004)
Set (Part # S4003)
Guide (Part # S4004)
Vertical Hinge Adjustment Instructions:
Using a Phillips screwdriver, first adjust the panel up or down by turning the screw marked "V" on the set hinge. When turning the screw in the direction of the arrow (counter clockwise) the other leaf will be pushed in the direction of the arrow. Automatic screwdrivers are NOT recommended. The speed of the gun may strip the heads of the screws are over adjusted.
When the vertical adjustment is turned clockwise, the non-adjustable leaf will move in the direction of the arrow. The vertical adjustment has approximately 32 turns from its extremes.
Replacement hinge for hinges with(watch video below) Pat. Nr. 5701636, Pat. Nr. 5,701,636
Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.
Known Brands: Hoppe Hardware, Hoppe Columbus, Semco, Windsor Doors and Superior Doors, Loewen Doors, Roto and more.
Matching Screws are included with each hinge.
*Finish Note: Not for Coastal or High Humidity Applications. These hinges do not come in a sea coast or stainless material, high humidity or costal application can cause hinges to corrade this is not a product defect.
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU
How to Adjust video below
updated 7/12/23
Part # 119
Casement Operator - Encore Dual Arm Sill Mount Amesbury Truth 50.10
119 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately.
Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.
Finish Arms available in: Standard E-Gard Beige (stock) and Stainless Steel (Non stock)*
*Non stock items are special order and can have a 2-6 week lead time. orders can not be cancelled or returned.
Associated Parts Sold Separately:
Part Number: 137 Encore Folding Handle and Cover Kit
Part # 187 - Sash Bracket with Set Ring - elbow arm of #101 operator snaps onto
Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto
Part # 114 - Sash Track (what the track shoe #189 slides into)
Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it.
Known to have been used on the following Manufacturing Brands: Hurd, Semco, Marvin, Cascade, BiltBest, Milgard, Sierra Pacific Monarch April 2006 to present and more.
Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed.
Known Part Numbers: 119, 096357, 096358, 36-368EN, 36-369-EN
updated 7/8/23
Part Number 166
EntryGard Replacement Covers Only - 10341 Amesburty Truth
Truth EntryGard Operator Contour Cover Only - Fits 15 Series EntryGard Casement and Awning Operator andHandles 139 and 135 sold separately - See Accessories items
Known Part Numbers On Operator: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179
Discontinued Color: Coppertone. For Additional Entrygard Covers in different styles and colors see part numbers S1002 and S1004
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific and more.
Free Economy Shipping On All USA Orders. If Cover color or QTY you want to order is is out of stock you can pre-order and parts will ship out as soon as they come in from the factory.
Part Number: 121
Amesbury Truth Adjustable Casement and Awning Hinge Track Kit
Stack Hight: 7/16" (see picture)
What's included: 1 left hand hinge track with hinge arm, 1 right hand hinge track with hinge arm (universal for both left and right handed casement Windows - hinges are used on the top and bottom of the casement window swap which one goes in top and bottom depending on how your window is handed).
Size: 10 inch, 14 inch (determine your size by measuring the track).
Finish: Standard (beige E-Guard powder coat shown in pictures), Stainless Steel
Hinge track kits are adjustable. To order adjustable wrench see part # 190 (sold separately). Only one wrench is needed for multiple hingesAdjustable hinges help with sash dragging. When you adjust the bottom hinge toward the locking side it raises up the lock side sash up. If it makes it worse adjust the other way.
If you have the old style hinges with the metal clip you MUST also replace the track, which comes in the kit, as the new style hinge arms do not have a metal clip to hold it to the track. They now have a set ring on the track to hold everything in place. Old style hinges with clip are no longer available.
Known Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532, 14-77-00-009, 14-77-00-010
Associated Parts Sold Separately:
part number 190: Hinge Adjustment Wrench
Part Number: 131
Folding Crank Handle for Amesbury Truth 11/32 Spline OperatorsColors: Aluminum, Beige, Black, Bright White, Bronze, Chestnut Bronze, Clay, Faux Oil Rubbed Bronze, New Goldtone, Tuscan Bronze White
Special order Colors: Goldtone, Oil Rubbed Bronze, Bright Brass are a non returnable item- no returns for these items
Large Quantities Order: orders with QTY 50 or more are special order items no returns or order cancellations.
Related Parts:
Part # 101 Truth Maxim Dual Arm Casement Operator
Part # 102 Truth Maxim Split Arm Dyad Casement Operator
Part # 209 Truth Maxim Awning Operator
Part # 111 Truth Ellipse Style Split Arm Dyad Casement Operator
Part # 105 Truth Ellipse Style Straight Arm Casement Operator
Other Amesbury Truth Operators
Part # 131 Folding Handle was primarily used on Part # 101, 102 and 209 Truth Maxim casement and awning operators).
Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007. Also used on many other window brands that use Truth Hardware
Known Part Numbers: Truth, 45393, U.S. PAT. 351490, 5560082, 131, Truth 3, 037189, 037188, 091691, 11329-32, HCSE31, A3-2104, A4-2149, A4-2150, A4-2147, A4-2148, 00-0000
Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Vetter, Allsco and more.
Updated 7/24/23
Part Number: 520 Sliding Patio Door Panel Replacement Rollers - Steel Ball Bearing
Sold Individually (2 required per door)
5 3/4 inch long from Center of screw hole to center of screw hole
11/16" thickness
1 1/4 wheels
Style:
Heavy duty for wood clad patio doors ( 1 roller weights 9.3 oz).
Light duty for vinyl patio doors (1 roller weights 6.6 oz)
Known Brands and Part#'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Semco and more.Known Part # 012021, PVS15, HWTR01
*Note to customer* there are a wide variety of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489
Part Number: 105
Amesbury Truth 15 Series "Traditional Square Case 13 1/2"" has been replaced by the Ellipse Case 60 Series (13 1/2"). They are a Direct Replacement, only difference is the case design. See pictures for more details.
13 1/2 Inch Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.
Known Part Number: 15.32, 105, 45251, 45136, U.S. PAT. 4505601, PAT. CANADA 1986, U.K. PAT. 2135397, 7707, 15-32-32-062, 15-32-32-061, HCSE43
Known Replacement Parts for: Hurd, Caradco, BiltBest, Oldach, Allsco, Semco (1976-1986) and more
Associated Parts Sold Separately:
139 Handle Roto Crank - 3 1/2" with 11/32" Spline
Operators with Similar Housing But Different Arms and Lengths:
Part Number S1082 - Truth/Wright Dyad Operator
Part Number S1048 - Truth/Wright Dyad operator
Part Number S1068 - Truth/Wright Dyad Operator
Part Number 105 - Truth/Wright Straight Arm
Part Number 115 - Truth/Wright Straight Arm
Part Number 109 -Truth/Wright Straight Arm
Part Number 112 - Truth/Wright Straight Arm
Part Number S1037 -GU - Split Arm Dyad Operator
Part Number S1038 GU - Split Arm Dyad Operator Kit
Part Number 111 - Truth/Wright Split Arm Dyad Operator
Part Number: S1107
Amesbury Truth 16 Series HomeGard Casement Window Sash Lock
Color: White and Bronze (New Goldtone has been discontinued and once our stock is gone it will no longer be available)
What's Included: Each lock is Sold complete with: 1 Lock, 1 Left Keeper, 1 Right keeper and color matching mounting screws for lock and keeper (so you can use on either left hand or right hand operating casement windows).
Dimensions: 2 1/4 Inch Wide x 2 3/4" Tall x 3/8 Inch deep at 1st step and 15/16 inch deep at 2nd step
Screw Hole Spacing: 2 5/16 Inch Center to Center
HomeGard Sash Locks are a perfect low-profile lock option for windows with smaller side stops. Featuring .625" pull-in, HomeGard locks offer a strong detent which consistently provides a more secure feel during lock up. HomeGard locks can withstand negative air pressure of 275 lbs. per lock.
Known to have been used on: Crestline, Vetter and Peachtree Windows, Semco
Known part number stamped on back: 45428 Truth, Truth w/ House Symbol Replacement version for locks stamped with 21328A, Retro fit replacement option for lock with stamp on back of 31664