Amesbury Truth 222 Encore Narrow Sill Mounted Awning Operator
Part Number: 222Truth Part Number: 51.11.00.215
Product Details
Model: Encore Narrow Sill Mounted Operator
Part Number: 222
Truth Number: 51.11.00.215
Color Options:
E-Gard Beige (as shown)
Stainless Steel Arms
Stamped with the Truth logo on arms and housing
Operator only
Cover, handle kit, and sash clips sold separately (See Part #223 and #137)
Installation - watch installation video in pictures above
This operator is commonly used on:
Hurd awning windows
Sierra Pacific awning windows
Silver Line windows
Other brands using Truth Encore awning hardware
Typically found on awning windows with approximately 11” and 15” glass widths.
If you are unsure whether this fits your window, send us clear photos of your existing operator and we’ll help confirm compatibility.
The Encore system is engineered for performance and ease of use:
Requires up to 33% less effort to operate
Snap-fit cover design
Full-flip folding handle that resists collapsing during operation
Mounts in the same location as the Maxim® system
Designed to integrate with the Encore multi-point locking system
Encore operators provide the strength and performance of the Maxim system with upgraded functionality and streamlined design.
Common Reasons for Replacement
Window crank spins but window does not move
Operator arm is bent or broken
Window will not fully close
Window does not seal properly
Mechanism feels stiff or stripped
Replacing your awning window operator can restore smooth function and improve window sealing without replacing the entire window.
📸 Not Sure This Is the Right Operator?
Email (info@WindowPartsCenter.com) or text (303-222-4489) us photos of your existing part, including the arm length and mounting holes. Our team specializes in window hardware identification and can help you avoid ordering the wrong part.
Other information:
Replace your worn or broken awning window operator with the genuine AmesburyTruth Encore 222 narrow sill mounted operator. This high-performance operator is designed for smooth, reliable operation.
If your awning window is difficult to open, won’t close tightly, or the crank mechanism is stripped, replacing the operator is often a simple and cost-effective repair.
Balance double hung clip for vinyl Windows.
Pack of 4
For side Sash load double hung and single hung windows
Clip when pulled out to 45 degree angle makes it possible then to remove sash.
Used on many vinyl window lines such as Cascade Vinyl windows, Milgard and Viking vinyl Windows and more
Part Number C10000ADAC
Interlock ASSA ABLOY TRU-Latch Pro Latch Cover ADA with pull string
The original standard in automatic sash lock solutions for hung and sliding windows.
The classic aesthetic design of our Concealed Screws Cover, with an adjustable pull cord to disengage the lock. Designed for easy operation and ADA compliancy.
Sold Individually ADA Cover Only (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns)
Color: White, Black, Almond (aka Beige)
Material: Composite
Interlock Part Series: 5f798
Parts Sold Separately:
Mechanism: Part Number C10000M
Mechanism Screws: Part Number C10000MS
Cover: Concealed Screw Cover Part Number C10000CSC
Cover: ADA with pull string Part Number C10000ADAC
Cover: With Exposed Screw Cover Part Number C10000ESC
Cover: Slimline Composite or Zinc Cover Part Number C10000SLC
Cover: With Exposed Screw Cover Part Number C10000ESC
Keeper: Face Mounted Striker Keeper Part Number C10000FMK
Keeper: Surface Striker Keeper Part Number C10000SSK
Keeper Screws: Part Number C10000KS
(Interlock US PAT NO 7,407,119 stamped on Mechanism )
Part Number C10000CSC
Interlock ASSA ABLOY TRU-Latch Pro Latch Cover Concealed Screw Cover 5f798
The original standard in automatic sash lock solutions for hung and sliding windows. Sash Lock Cover
With a classic aesthetic design to complement any window, this cover is supplied separately from the mechanism in order to conceal the screws and achieve a sleek, sophisticated look.
Sold Individually Cover Only (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns)
Colors: White, Black and Almond (aka Beige)
Material: Composite
Interlock Part Series: 5f798
Parts Sold Separately:
Mechanism: Part Number C10000M
Mechanism Screws: Part Number C10000MS
Cover: Concealed Screw Cover Part Number C10000CSC
Cover: ADA with pull string Part Number C10000ADAC
Cover: With Exposed Screw Cover Part Number C10000ESC
Cover: Slimline Composite or Zinc Cover Part Number C10000SLC
Cover: With Exposed Screw Cover Part Number C10000ESC
Keeper: Face Mounted Striker Keeper Part Number C10000FMK
Keeper: Surface Striker Keeper Part Number C10000SSK
Keeper Screws: Part Number C10000KS
(Interlock US PAT NO 7,407,119 stamped on Mechanism )
Part Number C10000FMK
Surface Fixed Striker Keeper (Face Mount Keeper) for Single Hung, Double hung and Horizontal Slider Window lock..
Sold Individually (for large orders of 50 + this will be considered special order item no returns)
Color: White, Blue White Almond (aka Beige), Clay
Parts Sold Separately:
installation jig: S1111JMechanism: Part Number C10000M
Mechanism Screws: Part Number C10000MS
Cover: Concealed Screw Cover Part Number C10000CSC
Cover: ADA with pull string Part Number C10000ADAC
Cover: With Exposed Screw Cover Part Number C10000ESC
Cover: Slimline Composite or Zinc Cover Part Number C10000SLC
Cover: With Exposed Screw Cover Part Number C10000ESC
Keeper: Face Mounted Striker Keeper Part Number C10000FMK
Keeper: Surface Striker Keeper Part Number C10000SSK
Keeper Screws: Part Number C10000KS
Mechanism: Part Number S1111M
Flip lock Keeper: Part Number S1111FLC
Part Number C10000M
Interlock ASSA ABLOY Tru Latch Pro Latch Mechanism Only. Replacement Part
The original standard in automatic sash lock solutions for hung and sliding windows.
PRO-Latch features a removable cover and the ability to provide cost-effective proprietary aesthetics as well as architectural finishes. Whether you’re looking for a composite or metal cover, or a mechanism that is surface mounted or recessed into the profile, Interlock’s PRO-Latch is the highly customizable sash lock system that delivers superior performance.
Dimension: 2 7/8 Inch
Sold Individually (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns)
Interlock US PAT NO 7,407,119 stamped on Mechanism
Manufacture Features
Removable snap-on cover (composite or metal options)
Fits most sliding and hung window applications
Multiple fixing locations available
Hurricane rated in impact-certified applications
Robust dual hooks for superior FER resistance
Surface mounted or recessed into profile
Patented cover design
Manufacture Specifications
± 2.032 mm (0.080”) of misalignment tolerance in all directions
± 2.032 mm (0.080”) – ±4.064 mm (0.160”) of lateral adjustment
depending on keeper design
Passes all required FER testing requirements for sliding
and hung windows
Designed for Dade County impact window applications
Has exceeded 145 kg (320 lbs) per lock in a pull test
Endurance tested to 36,000 operating cycles
Minimum 1,000 hours Neutral Salt Spray resistance
Parts Sold Separately:
Mechanism: Part Number C10000M
Mechanism Screws: Part Number C10000MS
Cover: Concealed Screw Cover Part Number C10000CSC
Cover: ADA with pull string Part Number C10000ADAC
Cover: With Exposed Screw Cover Part Number C10000ESC
Cover: Slimline Composite or Zinc Cover Part Number C10000SLC
Cover: With Exposed Screw Cover Part Number C10000ESC
Keeper: Face Mounted Striker Keeper Part Number C10000FMK
Keeper: Surface Striker Keeper Part Number C10000SSK
Keeper Screes: Part Number C10000KS
Replaces old Part number: C1000NS
Part Number C10000SSK
Surface Striker Keeper for single hung, double hung and horizontal slider window locks
Sold Individually (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns)
Color: White, Black, Almond (AKA Beige), Almond MK, Blue White
Known Accessory Parts Sold Separately:
installation jig: S1111J
Mechanism: Part Number C10000M
Mechanism Screws: Part Number C10000MS
Cover: Concealed Screw Cover Part Number C10000CSC
Cover: ADA with pull string Part Number C10000ADAC
Cover: With Exposed Screw Cover Part Number C10000ESC
Cover: Slimline Composite or Zinc Cover Part Number C10000SLC
Cover: With Exposed Screw Cover Part Number C10000ESC
Keeper: Face Mounted Striker Keeper Part Number C10000FMK
Keeper: Surface Striker Keeper Part Number C10000SSK
Keeper Screws: Part Number C10000KS
Mechanism: Part Number S1111M
Flip Lock Cover: S1111FLC
Part Number: C1033
Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly
Material: Standard
Cylinder: 45 Degree
Faceplate mounting screw holes: 4 5/8 inch center to center
Overall Depth: 1-9/32 inch or 1-5/32 inch (one we run out of stock of the 1 9/32 the 1-5/32 is all that will be available
Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more
C1059 Amesbury Truth PD GEMINI KEEPER 2-3 panel(DUAL MORTISE)
Part Number: C1059
Dimensions: 5/8 inch wide x 10 7/8 inch long x 1/2 inch deep
Style: Standard made of Zink or Coastal is non corrosive Stainless for Coastal or wet applications
Used on Cascade Patio Door PD GEMINI KEEPER For 2-3 panel (Used with DUAL MORTISE Lock) and Sierra pacific and Hurd Sliding all wood and wood clad patio doors
Associated parts Sold separately:
Part Number C1035 Mortise Lock with Flat face plate
Part number 558 Mortise lock with recessed flat plate
Use with Mortise Lock Box (PAT#: 6,264,252 - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE
Known part number ADH-7007-00 2447 Keeper and ADH-3007-87 2447 Keeper
Part Number MT063
Hurd Hinged Screen Door Replacement handle - Rite Screen
Screen
Screen Door Handleset with Mortise Box
Black only
Works on Hurd Rite Screen hinged screen doors and other brands (single door)
Instructions included
Price includes free standard shipping
Limited quantities available
Part Number: S1015 Residential SafeGard 2R - Current Style.
**Important: Review all information below, pictures along with pdf of truths installation instruction (pdf link below) to ensure WOCD will work on your casement window.
Amesbury Truth Residential SafeGard™ 2R Operating Control Device (WOCD) For Casement Windows
The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal) see picture figure 3 for more information. (If your window does not have his hinge cavity this WOCD will NOt work on your window). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations.
This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices.
Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B")
****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)****
Style: We recommend to check with your window manufacture which style to purchase for your window.
R2 Standard -Track (with black clip and red button): 8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep
R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep
(For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was: 6 3/8" Long x 3/4" Wide X 1/4" Deep
C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote - factory minimums would be required.
Truth Installation Instructions:
Safeguard 2R Installation Instructions PDF
Ordering Instructions for SafeGard 2R: Residential Applications
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required.
2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member
2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review.
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application).
Product Highlights
Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes
WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements
Avoids interference with operation or performance of a window
Features and Benefits beyond ASTM F2090-21
Fully concealed unit after installation and window in closed position
Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C)
Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag
All adjustments can be done inside the home after window is installed
Pan head screw (SS) use for ease of handling
Concealed arm after released from track
Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms
Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge
WOCD will automatically re-latch when window is fully closed
Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application
Safegard 2R Residential Application Info:
As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel.
PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device
ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement
The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal).
Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows
Window Type
Casement
Window Material:
Wood
Composite
Vinyl
Recommended Mounting Screws
#8 Pan Head, length and screw type dependent on application
Field Installation Instructions from Window Manufacturers: (as always we recommend contacting your window dealer if you require more information on WOCD WindowPartsCenter.com is an after market parts company not a window manufacture).
Marvin Modern and Ultimate Casement: https://www.marvin.com/f/1019562/x/8641870a63/casement-wocd-field-applied-instructions-19916498.pdf
Current Safegard 2 Video Below
Old Style No Longer With Red Clip Video Below- this style is no longer available replacement is the S1015
Part Number: S1062
Roto North America X Drive Awning Window Operator Roto-Frank - For Vinyl Window Applications
Style Option: Comes in X Drive and Pro Drive Option. See picture
AS IS: New but minor finish scratches- no returns on as is items all sales are final. Discounted due to scratches on finish. See picture: collection showing examples in of finish damage. Items sold individually.
X Drive: Euro White and Beige In Stock
Pro Drive (*Pro drive is being phased out, once discontinued, the X Drive is the direct replacement. If you are replacing a pro drive with an x drive you will need to also order a new handle see part number S10012)
Special order items:
X Drive Bright White
Pro Drive: Dark Brown, Earth Brown, Bright White, Beige (aka almond)
allow: 2-4 week lead time as not all colors are in stock at the factory. No returns or order cancellations on special order items
Associated Parts Sold Separately:
SS10013 - Roto North America Face Mount Bracket Assembly For Vinyl Awning
Associated X Drive Parts Sold Separately :
Part Number SS10012 - Roto X Drive Handle for Casement and Awning Window Operator
Associated Pro Drive Parts Sold Separately :
Part Number S1066 - FOLDING HANDLE FOR ROTO PRO DRIVE OPERATORS 5/16IN HEX END
Known Part Number: OP06-1507, OP05-2018, OP05-2017, OP06-7542-08, 203812, OP05-2044, OP05-2046, OP05-2047, OP05-2045, OP06-7546-26 PL1, OP05-7540-00
