Sliding Patio Door Parts

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is  Only available as a kit now see part # 544 501-095706 - Amesbury Truth Dummy Sliding Patio Door Handle Set Dummy Handle Set Discontinued Product- What we have in stock is all that is available.  No returns all sales final.  Amesbury Truth Handle Set,  Hurd Sliding Patio Door 40.81.51.100 - Truth Hardware  This handle set is a Discounted Old Style No longer Manufactured  Related Product: Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit

Read more less

Part Number: 505 Door Bottom Channel Weather Strip For Sliding Patio Door Size Length: 5-0 Door = 29 1/4 Inch Channel 5-4 Door = 31 1/4 Inch Channel 6-0 Door = 35 1/4 Inch Channel 8-0 Door = 47 1/4 Inch Channel Color: White Material: Vinyl Plastic Vinyl Dimensions: 3/4" Wide and flanges out to 13/16" Wide  X 1/2" Deep  x Length (see size options above) Description: U Channel Weather-strip for CHES/HES Hurd Sliding Patio Door. The metal channel is for older Hurd “Classic” doors and the plastic one is for “Energy Saver” doors. If you have the old metal we recommend you purchase the longest length(8-0) and retro fit like our how to video shows below.Metal Style NLA will have to retro fit by using the plastic part - the fuzzy weather strip will be installed toward the exterior on the door panel. Please watch how to video below.The Metal Dimensions (NLA): 5/8" wide at metal top and ¾” wide at fuzzy weather strip side x ½” deep x length depending on door sizeThe Plastic Vinyl Dimensions: 3/4" Wide X 1/2" Deep x length (see size options above)***505 part can only be retuned if its in new, unused uncut condition*** Associated Pars Sold Separately: Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 513 Vinyl Side Stop weather strip Used along with 511  Part Number 527 Wood Side Stop that 513 snaps into Part Number 511 Weather Strip Part Number 520 Rollers Known to have been used on: Hurd, Sierra pacific, Park Vue, Weather shield and many other patio door brands. ***505 part can only be retuned if its in new, unused uncut condition***   known past numbers:  SSPD467

Read more less

Part Number 511 Side or Head Seal Weather Strip for sliding patio doors Size: 94 5/8 Inch long  Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples This usually ships via UPS Ground. Color: Tan ONLY all other colors no longer available Known to have been used on: Hurd  patio doors, Park Vue, weather shield, Sierra pacific and many other wood and wood/clad sliding patio doors.  Return note: Reruns for only full length 94 5/8 inch parts. No returns accepted for samples or cut parts. Product can not be rolled, ships straight via ups only  Associated Pars Sold Separately: Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 513 Vinyl Side Stop weather strip Used along with 511  Part Number 527 Wood Side Stop that 513 snaps into Part Number 505 Channel Weather strip  

Read more less

Part Number 513 Vinyl Side Stop Weather Strip for sliding patio doors Length: 93 3/8 inch Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples This usually ships via UPS Ground. Color: Tan ONLY all other colors no longer available Known to have been used on: Hurd  patio doors, Park Vue, weather sheild, Sierra pacific and many other wood and wood/clad sliding patio doors.  Product can not be rolled, ships straight via ups only  Associated Pars Sold Separately: Part Number 527 Wood Side Stop that 513 snaps into Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 511 Vinyl Side or head Stop weather strip Used along with 513  Part Number 505 Channel Weather strip

Read more less

Part # 518 Replacement Door Mortise Lock for sliding Patio door Cylinder Color Style and Degree: Gray Style= 45 Degree Cylinder with faceplate  Face Plate Over All Dimensions: 6 1/8" Long x 3/4" Wide  Face Plate Top and Bottom mounting Screw Holes Center To Center Dimensions: 5-3/8"   overall depth 1-5/32 inch Black Style = 90 Degree Cylinder - will not come with faceplate customer will need to reuse their old one See video below that shows differences between the 2 options. and instructions on how to reuse your old faceplate.  You must replace the mortise lock with the same version (you can usually determine this as the old cylinder where colored either Gray or Black. The angle of the Gray cylinder is at a 45 degree angle and the black is at a 90 degree angle) If you do not choose the correct one keyed cylinder will not fit/operate. If your Cylinder is silver or gold looking color you have the newer style determine which style you need by the slot degree inside the cylinder (see drawing for example the 45 degree cylinder) Manufacturer: W&F Known Manufacturing Brands Used on: Hurd, Peachtree, W&F *replacement and more Similar Looking Products With Different Dimensions:  Part Number C1033  

Read more less

Part Number: 540-B; 41.13 Wingless  Secondary Patio Door Limiter Wingless Foot Bolt Sliding Patio Doors  Spring loaded and foot-operated, this sturdy device easily engages to provide a more secure door and easily releases to provide a ready means of escape. In fact, this patio door limiter has been tested to withstand a forced entry attempt of 400 lbs. of force. Material: Acetal body, release lever and button. Cold-rolled steel bolt Color: White or Bronze Keeper Option: 20824 (in stock) 30680 (in stock) 30672 (NOT in stock special order) Shim: Shim is ONLY needed for Hurd Brand all wood and wood clad Sliding Patio Doors Recommended Screws: (Screws Not Include)  For 41.13 Door Limiter WOOD: 4  #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS PVC/METAL: 4-#8 PHILLIPS, FLAT HEAD SCREWS (LENGTHS AND THREAD TYPE TO BE DETERMINED BY PROFILE) For Keeper 20824 WOOD: 2  #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS PVC/METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) For Keeper 30680 WOOD: 2  #8 X 1.0 PHILLIPS, PAN HEAD, SHEET METAL SCREWS PVC/METAL: 2 - #8 PHILLIPS, PAN H EAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) For Keeper 30672 WOOD: 2 #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS PVC/METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) Mounting: Mounts to bottom rail of sliding door and engages in sill, or into the face of the stationary door. See mounting positions “A” and “B”.Made in the U.S.A. Amesbury Truth (Stamped on Back 45010, and 30680)

Read more less

Click on picture to enlarge. Standard Binding Post Screw - Silver Mill Finish -$16.00 each. Fits in a 1/4" diameter whole. No other finishes available.UPGRADE Binding Post Screw - Chrome, Brass Dull Finish, Dark Bronze & 18-8 Stainless Steel $26 each. 1/4" Diameter. ***NOTE*** When using the Upgrade # 546U Binding post. The diameter is 1/4" so you will have to drill out the hole with a 5/16" drill bit for these binding post to fit.

Read more less

Part Number: 547 - Sliding Patio Door 1/2" Snap Plugs -Sold Individually Known Part Numbers: 037224, 010612

Read more less

Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Trim Plate  2818 Series - 2 Point - For Sliding Patio Door Keeper Sold Separately  Finish:  Standard (Stock) Stainless Steel (Special order non stock no returns) Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170 Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands. The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock

Read more less

S3006 C Elite Center Latch Handle Set By Sash Controls (For the Off Set Latch version see part # 522).  In Stock Colors: White, Black All other colors are non stock and can have a lead time of 2-5 weeks once you place your order.  Style: Keyed, Non-Keyed and Dummy Non-Keyed handle sets: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed handle sets: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door. If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts). Dummy Handle Sets: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummy's are mounted on the secondary door. Allow 3-4 week lead time once order is placed. Dummy Handle set DO NOT need new Mortise lock! Special Order Colors: Antique Brass, Dark Oil Rubbed Bronze, Brushed Chrome, Bright Brass, Satin Nickel  (Lead time will very depending on color you choose and are special order items no returns). Number Stamped On Back of Plate: 2265 Brand: Sash Controls, Accent Door Mortise Lock Box Sold Separately: If your Recessed Mortise Lock has the 90 degree black cylinder  you will need to purchase a new recessed mortise lock part # 518, S3007 or #S3011 with the 45 degree gray/silver cylinder for this handle set to work. Both mortise box work with handle # S3006 you will need to choose the type that your door panel is machine prepped for. Associated Products Sold Separately:  Part Number: 518 Mortise Lock  Part Number: S3011 Mortise Lock Box Part Number: S3007 Mortise Lock Box Part Number: 522 - Sash Controls C Elite Keyed Handle Set with Offset Latch - Sash Controls  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the French style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.Never use power tools when installing handle sets you run the risk of stripping out the screws.    

Read more less

Part Number: S3013 Tandem Roller Top Hole Mounting  Sliding Patio Doors Sold Individually  Finish: Steel or Stainless Steel Non stock item: Please allow 2-4 weeks for your order to ship as these rollers get ordered from the factory one you place your order with us. *Note to customer* there are a wide verity of tandem door rollers available. If the drawing does not look exactly like your tandem door roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCenter.com Text Line: 303-222-4489

Read more less

Part Number: SS30001 Tandem Door Rollers Sold individually. You will need 2 rollers per door operating panel Comes in Zinc and Stainless SteelUsed on Hurd Monument vinyl doors, superseal vinyl doors and sierra pacific vinyl patio doors - this replaces old P#V00375. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) *Note to customer* there are a wide verity of tandem door rollers available. If the drawing does not look exactly like your tandem door roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCenter.com Text Line: 303-222-4489

Read more less