Part Number: D300* - 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
W&F Trilennium 6 Inch CTC multipoint bore D300 is the new Replacement Handle Set - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D300 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and mounting screw hole placement 5 3/8" Center To Center.
Requires: 1 11/16" or 2 1/8" cross bore
Model: D300 Standard Set**
Screw Hole Placement: 5 3/8" Center To Center
Size: for Door Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze, Bright Brass, Satin Nickel, Black
Handing: Universal - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior.
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only***
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Notes for other options for this style hardware on older doors:
D300 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is
5 3/8" Center To Center then Active Modified 180 Degree (see pictures)
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation
For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Part Number: D301* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
W&F Trilennium 6 Inch CTC multipoint bore D301 is the new Replacement Handle Set - - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D301 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.
Requires: 1 11/16" or 2 1/8" cross bore
Screw Hole Placement: 5 3/16" Center To Center
Model: D301 Standard Set**
Size: for Door Panel Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze, Satin Nickel, Bright Brass
Handing: Universal - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates this is used with the newer style multi point see pictures for lever degree diagram).
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever* For Inactive panels in French doors that has 3020 lock installed only
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Notes for other options for this style hardware on older doors:
D301 handle set is manufactured to be used with the current multipoint system and will work with it for you right out of the box - you will order Active Standard 150 Degree (see pictures for lever degree diagram and associated parts below).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then you will order Active Modified 180 Degree to with with either of these two options (see pictures for lever degree diagram and associated parts below).
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock itmes - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock
For the Current Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Part Number: D302* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D302 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.
Requires: 1 11/16" or 2 1/8" crossbore
Model: D300 Standard Set**
Screw Hole Placement: 5 3/16" Center To Center
Size: for Door Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black
Handing: Universal - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only***
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Notes for other options for this style hardware on older doors:
D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures)
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case bases by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
****Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation
For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Part Number: D303*- 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
W&F Trilennium 6 Inch CTC multipoint bore D303 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D303 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and screw hole placement 5 3/8" Center To Center.
Requires: 1 11/16" or 2 1/8" crossbore
Model: D303 Standard Set**
Screw Hole Placement: 5 3/8" Center To Center
Size: for Door Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze, Satin Nickel, Black
Handing: Universal - Non handed. Works for both LH and RH swing doors depending on which lever you use for the exterior and interior
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only***
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Notes for other options for this style hardware on older doors:
D303 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/8" Center To Center then Active Modified 180 Degree (see pictures)
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
****Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation
For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Part Number: D304*
1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
W&F Trilennium 6 Inch CTC multipoint bore D304 is the new Replacement Handle Set -- Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D304 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and screw hole placement 5 3/8" Center To Center.
Requires: 1 11/16" or 2 1/8" crossbore
Model: D304 Standard Set**
Screw Hole Placement: 5 3/8" Center To Center
Size: for Door Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze , Satin Nickel, Bright Brass
Handing: Universal - Non handed works for both LH and RH swing doors depending on which lever you use for the exterior and interior
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever* For Inactive panels in French doors that has 3020 lock installed only
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Notes for other options for this style hardware on older doors:
D304 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is
5 3/8" Center To Center then Active Modified 180 Degree (see pictures)
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
****Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation
For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Part Number: D305 - As Is No Returns
150 Degree Rotation (see picture diagram of rotation) if you would like handle set to be modified to 180 degree rotation please email us as it’s a $35 up charge we will need to add to the order please email us at info@windowpartscenter.com or text us at 303-222-4489
What you will receive is shown in pictures. Handle Set Only - Satin Chrome only available QTY 1 once gone it will no longer be available. Stamped on back of face plates PAT. NO. 4,671,089 1200-126 and 1200-125
Discontinued item and no longer available. When what is in stock is gone use below link to D300 for replacement.
1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
For direct replacement see: part numbers D300 and choose Style: Active Modify 180 Degree
Repair Parts:
Part Number 701 bushing kit
no other parts are available for this handle set.
Part Number D305 - as is item. No returns as this ks the old discontinued style
W&F Original 1200-125 Trilennium Handle
Handle Set Only (not back sets - latch or dead bolts- or strike plates included).
6 inch center to center bore. And 5 1/4” center to center screw holes
Can be used on doors with double bore and back sets (latch and dead bolt)
Part Number D306 - Discontinued item no longer available
1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
D306 no longer available. The replacement would be part number D300 Active Modified 180 degree style (no backsets included with D300 handle, it is the handle set only as pictures on the D300 product page show. It is a special order item and there are no returns.
W&F Original 1200-126 Trilennium Handle
color: bright brass
Handle set includes backsets and strike plates. What is pictured is what you get.
6 inch center to center bore. And 5 1/4” center to center screw holes
sold As IS - no returns. New unused - old stock
D306 is a discontinued product.
PAT. NO. 4,671.89
Part Number: D307
Therma Tru Door Aluminum Assist Slide Astragal Bolt Spring
Used On Therma Tru Door French Semi Active Door
Sold Individually
Color: Copper
PUSH Is Engraved on the spring
Dimensions: 1/2 Inch Wide x 5 1/2 Inch Long
Part Number D308
The old style with the groove in the middle is no longer available. the replacement that you will receive is solid. -See pictures.
Mortise Lock Drive Rods Handset Spindles Shaft
Pack of 2
7 mm square x 18 mm long
For Trilennium, W&F and Endura handle sets
Known Pat. NO. On Handle Set: 4.671.089
Part Number D309
Keyed Cylinder for Trilennium, W&F and Endura handle sets
Each kit comes with 1 keyed cylinder and 2 keys
Style: Schlage or Weiser
Random Keyed: Means if you order 1 or more each cylinder will use a different key
Keyed Alike: means if you order 2 or more they will all use the same key
Size: 1 3/4 Inch (door panel thickness) or 2 1/4 Inch (door panel thickness)
Color: Satin Chrome (US26D) or Oil Rubbed Bronze (US10B) (ORB only available in Schaleg style)
