Part Number S4102
Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel
Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below.
Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used.
Sizing:
For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart
For Doors: 2 1/8 inch to 3 inch Doors - see chart Related Parts Sold Separately:
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4107 - Set Screw
For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder see part number
Trouble shooting:
If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.
Part Number S4103
Hoppe 90 Degree Short Cylinder Insert with Crescent Knob For 1 3/4 Inch Doors
Can be converted from 90 degree to 360 degree - see pictures for instructions
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4107 - Set Screw
Part Number S4104
Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4106 - Plastic Insert
Part Number S4107 - Set Screw
Part Number S4105
For Hoppe and CES
2mm Hex Wrench Cylinder with Crescent Knob
To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
part Number S4105 - Hex Wrench
Part Number S4107 - Set Screw
Part Number S4106
CES Plastic Insert For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4107
S4107 Hoppe Set Screw For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4106 - Plastic Insert
Part Number: S4108
Patio Door Handle Assembly
3 15/16 inch screw hole placement
Handle only, no mortise box latch or keeper included.
Color: White or Black
Style: Non Keyed
As of 3/21/25 this product is no longer available we are out of stock and can not get any more.
Part Number: S4110
Once our stock is gone this item will no longer be available. Sold AS IS - All sales are final.
French Series Handle Set - The Normandy by W&F
5 /12" Center to Center Bore, 3 15/16" center to center screw holes
Color: Antique Brass (all other finishes are no longer available)
Active Set Includes: 1 Exterior Face Plate, 1 Interior Face Plate, 2 Handle levers, Key Cylinder (wiser keyway), latch & deadbolt set with 2 3/8" backset (over all length of latch and deadbolt set are 3 inch's), radius strike plates, spindle 9/32" SQ x 2 9/16", Mounting screws 10-32 TH x 2 7/16"
Known Part Numbers: S4110, 1200-68, 55-226AB, 1200-67
Stamped On The Back of Face plate: PAT. NO. 4,671,089 - DES. 297,805 - 1200-68 - OTHER PAT. PEND. On latch PAT No. 4,671,089 and on dead bolt PAT NO: 4,741,089. 1200-67, Part Number 1200-3-1044, 8000-15-0, 8000-12, 1200-1-1021, 55-226AB
Once our stock is gone this item will no longer be available. Sold AS IS - All sales are final.
Part Number: S4111 Discontinued No longer Available . Replace with Part Number 852 Handle Set
Prado Contemporary Patio Door hardware
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Peachtree Prado Door Handle Hardware Trim PTP Trim (W&F Hardware)
6 inch center to center (thumbturn and key cylinder)
Thumb-turn inside
Color: Antique Brass finish
Comes with: Interior and exterior faceplate and knobs, shaft, strike plates, keyed cylinder and 2 keys.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Known Part Numbers: 36280005 8006-3, PTP Trim, S4111
Part Number: S4112
W&F Multipoint Mortise Lock 2-3/8IN BACKSET For 6 Inch handle
Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION
high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875
Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.
Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base.
This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002].
Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise.
DO NOT TAKE APART THE MORTISE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTISE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT.
Associated Parts Sold Separately:
S4112TK - Alignment Key Tool - System Rod Timing Key
D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock
