Part Number: S4111 Discontinued No longer Available . Replace with Part Number 852 Handle Set
Prado Contemporary Patio Door hardware
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Peachtree Prado Door Handle Hardware Trim PTP Trim (W&F Hardware)
6 inch center to center (thumbturn and key cylinder)
Thumb-turn inside
Color: Antique Brass finish
Comes with: Interior and exterior faceplate and knobs, shaft, strike plates, keyed cylinder and 2 keys.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Known Part Numbers: 36280005 8006-3, PTP Trim, S4111
Part Number: S4112
W&F Multipoint Mortise Lock 2-3/8IN BACKSET For 6 Inch handle
Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION
high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875
Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.
Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base.
This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002].
Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise.
DO NOT TAKE APART THE MORTSE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTSE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT.
Associated Parts Sold Separately:
S4112TK - Alignment Key Tool - System Rod Timing Key
D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock
Special order items estimated lead time 2-6 weeks. No returns or order cancellations
Part Number: S4114
GU Ferco 45MM Capri Lever Swinging Door Handles Trim Sets - Handle Above Cylinder
Handle trim Set only Capri Lever Handle Above Cylinder Style (as pictured for 1 door panel) - multi or single point mortise boxes sold separately
45 MM Trim Plate
Capri Lever
Handle Above Cylinder
Solid Brass or Zamac Trim Sets
Stainless steel set screw on levers to secure spindle
US cylinder with standard Schlege "c" keyway (active only)
90 degree locking with thrumb turn (for active and semi active)
Unassembled kit for 1 3/4" and 2 1/4" thick doors
Self- Centering Spindle
Use with Mortise lock, SECURY S2, SH2 and SECURY Automatic Door Gears
Patented handle clipping system.
Screw Hole Spacing: 7-3/4 inch
Zamac Available in: Dark Bronze, Black and White
Solid Brass Available In: Satin Chrome, Polished Brass, Antique Brass, Oil Rubbed Bronze, Satin Nickel, Dark Bronze, Pewter and Black
Style: Active, Semi Active and Dummy
Scroll thru pictures for dimentions and manufacture installation and trouble shooting instructions.
Part Number: S4115
Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock Aux Module
This is designed to be field reversible. The latch is two
stage, it operates first as a latch, then further extends to
be a deadbolt. But the housing is symmetrical and the latch
is removable. It can be operated for Left hand or Right Hand, inswing or outswing swing doors.
Associated Parts Sold Separately:
D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
S4200AC Active - With Cylinder- Hoppe Munchen Series M112Pl/374N- Swinging Door Handle Sets
Active Door Set - With 90 Degree Cylinder
All handle sets are for 1 3/4" thick doors.
All Hoppe swing door handles are available in Active, Inactive and Dummy Sets.
Special order Item - No returns Allow 3-5 week lead time once you place your order.
If your lever is drooping- that’s not a lever issue. It means the lever return spring inside the mortise lock is either broken or stretched, and you will need to replace the multi point inside the door panel.
Products Sold Separately:
Multipoint / Single Point Locking Systems Gear Box are sold separately
Additional Notes: Hoppe #S4200AC can be used interchangeably to replace Roto style 56-111BRS which is now obsolete (Roto S 623 B 24 is stamped on the single point gear box). Please verify dimensions with our drawings of the Hoppe handle set #S4200AC to make sure you have the correct Roto Trim Handle that is interchangeable with our S4200AC.
S4200ANC Active - Cylinder Not Included- Hoppe Munchen Series M112Pl/374N- Swinging Door Handle Sets
Active Door Set - Cylinder Not Included
All handle sets are for 1 3/4" thick doors.
Multipoint / Single Point Locking Systems sold separately
All Hoppe swing door handles are available in Active, Inactive and Dummy Sets.
Special order Item - No returns
Additional colors available by request only.
S4200D - Dummy- Hoppe Munchen Series M112Pl/374N- Swinging Door Handle Sets
Dummy Door Set - Dummy Sets are fixed and do not operate - no handle
All handle sets are for 1 3/4" thick doors.
Multipoint / Single Point Locking Systems sold separately
All Hoppe swing door handles are available in Active, Inactive and Dummy Sets.
Special order Item - No returns
Additional colors available by request only.
Bulk Pricing available in QTY 10 or more (can not mix and match colors).
S4200IT- Inactive - Thumb Turn Insert NOT Included- Hoppe Munchen Series M112Pl/374N- Swinging Door Handle Sets
Inactive Door Set - Thumb Turn Insert NOT Included
All handle sets are for 1 3/4" thick doors.
Multipoint / Single Point Locking Systems sold separately
All Hoppe swing door handles are available in Active, Inactive and Dummy Sets.
Special order Item - No returns
Additional colors available by request only.
Bulk Pricing available in QTY 10 or more (can not mix and match colors).
S4200IT- Inactive - With Thumb Turn Insert Hoppe Munchen Series M112Pl/374N- Swinging Door Handle Sets
Inactive Door Set - With Thumb Turn Insert
All handle sets are for 1 3/4" thick doors.
Multipoint / Single Point Locking Systems sold separately
All Hoppe swing door handles are available in Active, Inactive and Dummy Sets.
Special order Item - No returns
Additional colors available by request only.
Bulk Pricing available in QTY 10 or more (can not mix and match colors).
Part Number: S4202
Amesbury Truth Allure Series Gliding Door handle Set Only (mortise lock box sold separately)
Factory has in stock allow 1 week for you order to ship
Style: Active with NO Key
Color: White
MOUNTING SCREWS: 2X #8-32 PHILLIPS OVAL HEAD MACHINE SCREWS (1.75, 2.125, AND 2.50 LENGTH SCREWS ARE PROVIDED IN THE KIT TO FIT STILE THICKNESSES RANGING FROM 1.25 TO 2.25).
Known to have been used on Comfort Line FiberFrame and many other sliding patio doors, Part Number 40.85.32.100.1
Below are style of this handle set that is special order and will need to be quoted - please email us for quote info@windowpartscetner.com:
Active with Key
Dummy
Other Colors and Finishes
