Once stock is gone to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-009 - Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-010 - Gasket - Hoppe Door Handle Set - Hurd Swinging Door
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-011- Dummy Handle Set - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-012- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Once stock is gone to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available805-014- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
085428 Handleset for Hurd Swing Door that has Hoppe multipoint hardware. Oil Rubbed Bronze.
This is a Discontinued style - what we have in stock is all that is available. No returns on this item.
No Longer available to order new handle set see part number S4100AC
Oil rubbed bronze CES keyed cylinder. Sold as is shown in picture. No returns. All sales final.
Contains cylinder, 2 keys and set screw.
Lock Cylinder for Hoppe habdle set
Part Number 808
Frame Weather Strip for In Swinging Patio DoorsUsed on Side and Head Frame of Hurd In swinging French Patio DoorsComes in 4', 8' rolled, 12 foot - All Rolled
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
3 or 4 Q-lon per door are required if you want to replace all of this type of weather strip on your door:For a Single door you need QTY 3: QTY 2 at 8' pc for the sides and QTY 1 at 4' pc for the head.For a French door then you need QTY 2 at 8' pc for the sides and QTY 1 at 8' pc for the head and QTY 1 at 8' pc for the astragal in the middle. Customer will have to cut weather strip to length they need if they have a smaller door than 4' wide or 8' Tall
***SHIPPING NOTE***Product is shipped rolled in a box. If you want product shipped straight in a long box please email info@windowpartscetner.com for quote. (4 foot and 8 foot only we will not quote or ship out 12 foot pcs straight).
Part Number 810
Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors and others
(If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com)
Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.
Comes with: bottom extension with gear box attached and the top extension (choose your door height size).
handing: Non handed latch is reversible. See pictures for directions on how to change latch handing
Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0.
Style Options:
Hoppe Gear Box Flipper/Tongue Style
(For roller version see part number 810R and 820R)
Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.
Install Instructions (also see instructions in pictures):
Remove set screws on handle levers and remove
remove three mounting screws on faceplate estuation
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
For roller version see part number 810R and 820R
The Hoppe #810R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock.
Hoppe Roller Style will also replace the Old FUHR Roller style.
Part Number 810R
Hoppe Multipoint Automatic Roller Bottom Gear Box Extension HLS9000
CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different. Info@WindowPartsCenter.com
Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.
Style: Roller
Comes with: bottom extension with gear box attached (top extension SOLD separately see part number 820R for top extension these are for Hurd doors only. For other brand doors please email for worksheet to fill out for a quote)
The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock.
Handing: Non handed latch is reversible. See video on how to change latch handing
Associated Parts Sold Separately:
820R - Hoppe Multipoint Automatic Roller TOP Extension HLS9000
813 - Hoppe 3Pt Convert Auto Release Striker
833 - Hoppe 3Pt Convertible Under plate
834 - Hoppe 3Pt Striker For Rollers
819 - Hoppe Multipoint Latch Plate
S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP
S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set
S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set
S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set
S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N
Other Hoppe Multipoint and Single Point We Stock:
810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000
820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000
825 - Hoppe Single point Gear Box
For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote
Install Instructions (also see instructions in pictures):
Remove set screws on handle levers and remove
remove three mounting screws on faceplate estuation
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
810R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.
#813 - Hoppe 3Pt Convert Auto Release Striker - Bright Brass
Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors
May have minor scuffs, etc these come this way from the factory not considered a defect.
Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware
Sold Separately Are Part Numbers:
#833 - Hoppe 3Pt Convertible Under plate #834 - Hoppe 3Pt Striker For Rollers - Auto
