Sliding Patio Door Parts

Discontinued style no longer available . See part number 522 for replacement  Replace with 522 Link: https://www.windowpartscenter.com/products/522-c-elite-handle-set-1993-2006-hurd?_pos=1&_sid=ee104dc28&_ss=r 038545 CHES Elite "C" Handle Set - Hurd Sliding Patio Door Handle Set For Hurd Classic Style Patio Door  This style handle is discontinued. What we have in stock is all that is available. See part # 522 to order new style "C" Elite handleset that comes in multiple colors.  W&F part # 120-80-1000, 120-80, 120-84-0  

Read more less

For Elite Sliding Clad (CHES) DoorShim For Old Style C Elite Handle that are on Hurd sliding patio doors made from 1993 - 2006 This Shim only works with Old Style CHES Elite "C" Handle Set part # 038545, 085472, 085474 This shim will NOT work with new style C-Elite handle # 522

Read more less

W&F Upgrade Handle (All Brass) Is No Longer Available. Use replacement options below. How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order! Verify you have the "B" screw hole position on your W&F mounting plate (see picture) If you find you have the "A" Screw Hole Click Here Please watch videos below!  Parts to order: 1. Handle set: Part Number S3006 Handle Set Center Latch for "B" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for faction explanation.  2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the S3006 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following # 518 Gray cylinder 45 degree  # S3007 45 Degree  #S3011 45 Degree  If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts. 3. Binding Post Screw - as shown in the how to video the replacement handle set is not as long as the old W&F handle set you are replacing.  You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw. Part# 546 - your choice of finish Additional Info: S3006 Handle Set Function Explanation: Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts) Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.  See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws. Known Part Numbers On  W&F Handle : P/N 120-50, PAT. # 5,092,114 Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144   Video is for "A" but installation is the same for the "B" placement (video shows a Hurd Classic Sliding Patio Doors that Used W&F Brass and Wood handle Set)

Read more less

516 - W&F Upgrade Handle (Brass and Wood) Is No Longer Available. Use replacement options below. How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order! Verify you have the "A" screw hole position on your W&F mounting plate (see picture)  Please watch videos below! Pictures and video show a Hurd Classic Sliding Patio Doors that Used W&F Brass and Wood handle Set.  If you find you have the "B" Screw Hole Click Here Parts to order: 1. Handle set: Part Number 522 Handle Set offset latch for "A" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for function explanation.  2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the 522 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following # 518 Gray cylinder 45 degree (Hurd Brand Doors and others) # S3007 45 Degree (other brand doors) #S3011 45 Degree (other brand doors) If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts. 3. Binding Post Screw - as shown in the how to video the 522 handle set is not as long as the old W&F handle set you are replacing.  You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw. Part# 546 - your choice of finish 4. White Shim - as shown in how to video you door thickness may require a shim. Shim is known to be needed on Hurd Doors Part Number: 522SHIM Additional Info: 522 Handle Set Function Explanation: Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door you have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts) Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummy's are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the latch: This could be because you have the French style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.  See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws. Known Part Numbers On  W&F Handle : P/N 120-50, PAT. # 5,092,114  Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144 If your mounting plate and handle uses the "B" Screw Holes See Part Number S3006 Replacement Kit

Read more less

Part number 519 Manufacture has discontinued this mounting plate and the handle sets it goes to.You will need to replace your full handle set. To know which style of replacement handle set to order for your door - Identity If your mounting plate uses the "A" screw Holes or "B" Screw Holes and follow to the corresponding links below for instructions and list of the parts you will need:"A" Screw Holes: Off set Latch needed (Used on Hurd Doors and other brands)Click Here for Instructions on how to order a Replacement Handle Set "B" Screw Holes: Center Latch needed (Used on Other Brand Doors)Click Here for Instruction on how to order a Replacement Handle Set Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144

Read more less

Discontinued Product. no longer manufactured See part # 522 for replacement handle for this handle set. Multiple finish to choose from. 085472 - CHES Elite "C" Dummy Handle Set Bronze - Hurd Sliding Patio Door Discontinued Product. What we have in stock is all that is available.  See part # 522 for replacement handle for this handle set. Multiple finish to choose from. W&F part # 120-70-1062

Read more less