Swinging Patio Door Handle Sets & Parts

Part Number: 840  Amesbury Truth Sentry® .63 and Sentry® .03 Used For GU Multi Point Hardware ACTIVE HANDLE SET* (Hurd and Sierra pacific) Active handle sets come keyed with thumb turn and are for single door or the primary active door panel on a French door. 10 Inch Escutcheon NOTE TO CUSTOMER: As of March 20 2017 the OLD STYLE 8.9375 long Escutcheon was discontinued by the manufacture (mounting screw hole where 7 5/8" center to center. The new style has 10" long Escutcheon (Mounting screw holes are 8.5" center to center). Note this height change does alter the placement of our mounting holes. Bottom mounting screw hole will be reused, but the customer will have to drill one new top mounting screw hole. The old mounting screw hole will be covered by the escutcheon.  All handle sets will be shipped with the new 10 inch taller escutcheon plates. Please note a new mounting hole will be necessary. Field instructions (see pictures)  Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time. Finish Options for Different Styles:  (All styles are not available in every finish color) Classic Escutcheon with Traditional Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Champagne Oil Rubbed Bronze FB**  Polished Chrome Satin Nickel White Classic Escutcheon with Loft Handle  Antique Brass Brushed Chrome Oil Rubbed Bronze FB (forever bronze not true oil rubbed bronze that will change) Polished Chrome Satin Nickel White  Contemporary Escutcheon with Loft Handle Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Squared Contemporary Escutcheon with Contemporary Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.Used on Hurd Inswing and outswing patio doors all wood and wood clad 2006 - Present - Direct Replacement For 2005 models as well *For Semi Active handle set see part number 841 Has thumb turn no keyed lock- To be used on a secondary door panel on a French door  that has shoot bolts that are operated and locked into place by the handle set. *For dummy handle see part number 842 no operation no thumb turn - To be used on a secondary door panel on a French door that is fixed in place with no operation or has manual shoot bolts that are not operated by the handle set. **FB = forever bronze so it will not change color over time like a true oil rubbed bronze would.

Read more less

Part Number: 880 GU Latch and Dead Bolt Strike Plate Handed: Left Hand, Right Hand Colors:  Stainless Steel  Special order color: Oil Rubbed Bronze (special order items - no returns allow 2-3 weeks lead time) Discontinued Colors Once stock is gone no longer available: Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

Part Number: S3004 - Sold Individually  Hoppe Handle Set Screw Size: 6M x 12 mm 304SS 

Read more less

Part Number S4104 Hoppe CES Ring Wrench Tool For Plastic Insert Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions  Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4106 - Plastic Insert Part Number S4107 - Set Screw

Read more less

W&F Door Handle Solid Shaft Replacement Part Aluminum  1- 37/64" (40.1 mm)  long x  9/32" (7.1 mm) tall Associated Parts Sold Sold Separately: Part Number 701 W&F Single Handle Bushing Kit W&F Interior and Exterior Replacement Handles W&F Door Handle Solid Shaft 870 - W&F Handle Extension  

Read more less

Part Number D308 Mortise Lock Drive Rods Handset Spindles Shaft Pack of 2 7 mm square x 18 mm long For Trilennium, W&F and Endura handle sets

Read more less

Part Number: 829 Hoppe Split Shaft only screws sold separately (See Part Number: 840-031 Set Screws or S3004 - metric 6-10) Shaft Size Order By Length:  3 15/16 inch ( 5/16 inch x 3 15/16 inch or 8 mm x 100 mm) For Doors Smaller 1 3/4 inch thick Can be used as a replacement split shaft for old GU handle sets 4 21/64 inch (5/16 inch x 4 21/64 inch or 8mm x 110 mm) For Doors Smaller than 1 3/8 inch thick 4 11/16 inch (5/16 inch x 4 11/16 inch or 8 mm x 120 mm) For 1 3/4 Thick Doors Commonly used on Hurd and Truth hardware 5 1/2 inch (5/16 inch x 5 1/2 inch or 8 mm x 140mm) For 2 1/4" thick doors 6 1/4 inch (5/16 inch x 6 1/4 inch or 8 mm x 160 mm) used with the 1" Hoppe Handle extension part # 828 sold separately Commonly used on Hurd and Truth hardware that has extension 828   See figure F in drawing for correct split shaft spindle position installation.  Associated Parts Sold Separately:  6 1/4 is used with the 1" Hoppe Handle extension part # 828 Part Number: 840-031 Set Screws pack  Part number S3004 - metric 6-10 screws

Read more less

840-029 Amesbury Truth GU Handle Set Thumb Turn Plastic Washer-  set of 2 - Swinging Patio Door Hurd Comes with 2 plastic washers Two sizes available depending in your vintage of handle set. Large and small. Inside Diameter is the same on both.  See picture of thumb turn that shows with 2 washers on it. One goes on the outside of the faceplate and the other goes on the inside of the faceplate.  Discontinued Product. If it's in stock we have it. No returns all sales are final.  

Read more less

840-006 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door. Replacement Door Handle only all other parts sold separately. Discontinued Product. What we have in stock is all that is available.  No returns, all sales final, finishes color variation due to true metal finish and minor scratches.   

Read more less

Part Number: D302* W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Active Modified 180 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for older multi point and double bore systems see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: *Non stock - Allow 1 week for your order to ship - No order cancellations or returns  **This handle set also comes in other Models: See part numbers: D300, D301, D303, D304 ***Operational Lever: Can move up and down when door is unlocked **** Fixed Lever: Inactive, and is intended for push/pull function. *****Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com

Read more less