Part Number S4106
CES Plastic Insert For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4105
For Hoppe and CES
2mm Hex Wrench Cylinder with Crescent Knob
To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
part Number S4105 - Hex Wrench
Part Number S4107 - Set Screw
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available.
840-011- Amesbury Truth GU Faceplate - Swinging Patio Door Hurd
Discontinued Product. What we have in stock is all that is available. No returns. All Sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Once stock is gone to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-006 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
3 exposed screw holes (no screws included)
Discontinued Product Part- what we have in stock is all that is available. Sold as is, all sales final.
M216N stamped on back of face plate
No Longer available to order new handle set see part number S4100AC
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-005 - Thumb Turn Only - for Hoppe Door Handle Set - Hurd Swinging Door
085427 - Hoppe Handle Set ORB Active - Hurd Swinging Door
This is a Discontinued style - what we have in stock is all that is available. No returns on this item.
W&F 1200 Series Handle Set 6" Center to Center Bore .Double Island Escutcheon Versailles Handles
Discontinued Once our Stock is gone replace is 852 handle set.
As Is non returnable. Complete old stock bright brass handle sets only with weather shield logo on handles. These are for 6 inch center to center bore doors - will work on weather shield, Hurd and Peachtree doors with 6 inch center to center bores and mounting screw holes 6 1/16 inch center to center.
1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets.
Stamped on back of face plates: PAT. PEND. 6 1200-1-1
Direct Replacement option: Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore
Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1). Part number 852 is the replacement style for the 6” center to center double bore backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below). .
known part number: 13-283BBK-1
W&F Replacement Parts Sold Sold Separately:
W&F Interior and Exterior Replacement Handles
W&F Door Handle Solid Shaft
870 - W&F Handle Extension
701 Bushing Kit
NOTE! 852 only works for 6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or 2 1/8" multipoint bore and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )
Part Number D308
The old style with the groove in the middle is no longer available. the replacement that you will receive is solid. -See pictures.
Mortise Lock Drive Rods Handset Spindles Shaft
Pack of 2
7 mm square x 18 mm long
For Trilennium, W&F and Endura handle sets
Known Pat. NO. On Handle Set: 4.671.089
Part Number: 841 Semi Active Current Style
Amesbury Truth Sentry® .63 and Sentry® .03
For GU Multi Point Hardware SEMI ACTIVE HANDLE SET*
Semi Active handle set has thumb turn, but no keyed lock- To be used on a secondary door panel on a French door that has shoot bolts that are operated and locked into place by the handle set.
10 Inch Escutcheon
NOTE TO CUSTOMER: As of March 20 2017 the OLD STYLE 8.9375 long Escutcheon was discontinued by the manufacture (mounting screw hole where 7 5/8" center to center) . The new style has 10" long Escutcheon (Mounting screw holes are 8 5/8" center to center). Note this height change does alter the placement of our mounting holes. Bottom mounting screw hole will be reused, but the customer will have to drill one new top mounting screw hole. The old mounting screw hole will be covered by the escutcheon.
All handle sets will be shipped with the new 10 inch taller escutcheon plates. Please note a new mounting hole will be necessary. Field instructions (see pictures)
Finish Options for Different Styles:
(All styles are not available in every finish color)
Classic Escutcheon with Traditional Handle
Antique Brass
Black (Matte)
Bright Brass
Brushed Chrome
Champagne
Oil Rubbed Bronze FB**
Polished Chrome
Satin Nickel
White
Classic Escutcheon with Loft Handle
Antique Brass
Brushed Chrome
Oil Rubbed Bronze FB (forever bronze not true oil rubbed bronze that will change)
Polished Chrome
Satin Nickel
White
Contemporary Escutcheon with Loft Handle
Antique Brass
Black (Matte)
Bright Brass
Brushed Chrome
Oil Rubbed Bronze FB**
Polished Chrome
Satin Nickel
White
Squared Contemporary Escutcheon with Contemporary Handle
Antique Brass
Black (Matte)
Bright Brass
Brushed Chrome
Oil Rubbed Bronze FB**
Polished Chrome
Satin Nickel
White
Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.Used on Hurd Inswing and outswing patio doors all wood and wood clad 2006 - Present - Direct Replacement For 2005 models as well
*For Active handle sets see part number 840 comes keyed with thumb turn and are for single door or the primary active door panel on a French door.
*For dummy handle see part number 842 no operation no thumb turn - To be used on a secondary door panel on a French door that is fixed in place with no operation or has manual shoot bolts that are not operated by the handle set.
**FB = forever bronze so it will not change color over time like a true oil rubbed bronze would.
Part Number S4107
S4107 Hoppe Set Screw For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4106 - Plastic Insert
