Part Number 881
GU Multi Point In Swinging Door Strike
Colors: Stainless Steel and Oil Rubbed Bronze
Discontinued colors:
All other colors below have been discontinued and no longer available. Any stock we still have is AS IS no return.
Antique Brass
Bright Brass
Polished Chrome
White
Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw
Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.
no longer available- see part number 840 - Current style for replacement handle set
840-023- Amesbury Truth GU parts Kit- Swinging Patio Door Hurd
Comes with all that you see in the picture.
Discontinued Product. If it's in stock we have it. No Returns all sales are final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available.
840-008 - Amesbury Truth GU Handle - Set Screw and Shaft Type - Swinging Patio Door Hurd.
Replacement handle only. All other replacement parts sold separately.
Discontinued Product. What we have in stock is all that is available. No returns, all sales final. Some may have minor scratches.
Part Number: D300*
W&F Trilennium 6 Inch CTC multipoint bore D300 is the new Replacement Handle Set - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns
D300 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and mounting screw hole placement 5 3/8" Center To Center.
Requires: 1 11/16" or 2 1/8" cross bore
Model: D300 Standard Set**
Screw Hole Placement: 5 3/8" Center To Center
Size: for Door Thickness 1 3/4" or 2 1/4"
Colors: Victorian Bronze, Bright Brass, Satin Nickel, Black
Handing: Universal - Non handed works for both LH and RH swing doors depending on which lever you use for the exterior and interior
Style:
Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)
Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed
Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only***
Active Modified 180° Option (Add-On)
This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.)
How to order:This is an additional add-on and must be selected under “Accessory Items.”
If you order 1 handle set → add Qty 1 of the 180° modification
If you order 3 handle sets → add Qty 3 of the 180° modification
Each handle set that needs this modification requires its own quantity.
Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands.
Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate
Notes for other options for this style hardware on older doors:
D300 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures).
If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is
5 3/8" Center To Center then Active Modified 180 Degree (see pictures)
If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852).
If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com
footnotes:
Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns
*Active Modified 180 Degree bushing or cartridge has no manufacturer warranty
Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review.
This handle set also comes in other Models: See part numbers: D300, D301, D302, D304
Operational Lever: Can move up and down when door is unlocked
Fixed Lever: Inactive, and is intended for push/pull function.
Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect.
Associated Parts Sold Separately:
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation
For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com
Part Number S4102
Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel
Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below.
Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used.
Sizing:
For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart
For Doors: 2 1/8 inch to 3 inch Doors - see chart Related Parts Sold Separately:
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4105 - 2mm or 5/64" Hex Wrench
Part Number S4107 - Set Screw
For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder see part number
Trouble shooting:
If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.
Part Number: 862
Construction Handle for GU, Hoppe and W&F Brands - Special Order NO Returns
During construction use the construction handle on your patio doors and save your nice handle sets from getting damaged.
old short style discontinued see part number 840 current style
840OST - old short steel - Amesbury Truth Handle Set for GU Multi Point Hurd Swinging Door
This handle set was discontinued by the manufacture in 2017 - only what we have in stock is available and no return for this part.
Amesbury Truth, GU, Hurd 099653
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
805-012- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door
Bright Brass NO SCREWS Included
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Part Number: S4111 Discontinued No longer Available . Replace with Part Number 852 Handle Set
Prado Contemporary Patio Door hardware
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Peachtree Prado Door Handle Hardware Trim PTP Trim (W&F Hardware)
6 inch center to center (thumbturn and key cylinder)
Thumb-turn inside
Color: Antique Brass finish
Comes with: Interior and exterior faceplate and knobs, shaft, strike plates, keyed cylinder and 2 keys.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Known Part Numbers: 36280005 8006-3, PTP Trim, S4111
Part Number S4106
CES Plastic Insert For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4105
For Hoppe and CES
2mm Hex Wrench Cylinder with Crescent Knob
To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
part Number S4105 - Hex Wrench
Part Number S4107 - Set Screw
