Swinging Patio Door Parts

Part Number: R801 / R802 M3 DUAL ADJUSTABLE LIFT OFF CONCEALED BALL BEARING HINGE IN BRUSHED NICKEL FINISH M3 Hi-Performance Independent Dual Vertical and Horizontal adjustable hinge comes standard with a Lift off feature along with a concealed ball bearing and a Non-Removable Pin.The Rockwell M3 hinges are available in Steel, Stainless Steel or Solid Brass in coated and architectural finishes. Lift-Off FeatureThe Lift-Off Feature allows for the easiest removal and installation of the door panel to and from the door frame where NO Tools are required, saving time and money. Hi-PerformanceRockwell Adjustable hinges have been independently third party tested to exceed ANSI/BHMA 156.1 Grade 3 standard for 350,000 cycles with 3 hinges on a 180 lbs door panel. AdjustabilityIndependent Dual vertical and horizontal adjustment comes standard on all hinges. No separate set and guide hinges.1/4” Vertical Adjustment with a heavy duty 7/16″ hex head vertical adjustment screw that incorporates a ball bearing. Only 2-1/2 turns are required each way with a visual adjustment indicator.5/16” horizontal adjustment with a combination head screw allows the use of either a Phillips or Flat head screw driver. Only 4 turns max are needed each way for 5/16″ horizontal adjustment.One step industry standard routing with 5/8″ corner radius simplifies door preparation. Fits industry standard template making it suitable for new installations or replacements. Strength and DurabilityHeavy Gauge All Metal Construction.No Plastic or Synthetic Parts.Heavy Duty 7/16” diameter Pin for extra strength.Concealed ball bearing located inside the hinge knuckle that makes for an aesthetically cleaner look. Smooth OperationHeavy Duty Pin sits on a Concealed Hardened 3/8” Ball Bearing providing ease of operation and improving cycle life. SecurityBuilt-in Non-removable Pin comes standard making it suitable for both Inswing and Outswing ApplicationsAdjustable Hinge Maximum adjusted door weight : 180 lbs. 3 hinges  or 240 lbs. 4 hinges. Known Part Number: 12500003 Known to have been used on: Milgard and other door brands  IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU.

Read more less

Part Number: 836  4" x 4" Ashland Vertical  Set Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" VERTICAL ADJUSTABLE DOOR HINGES For Mate Horizontal Hinge See Part Number 835  Low Stocked Item - May have a 2-3 week lead time Handing: Non Handed - see video below. Remove pin and flip to reverse handing KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated Product Sold Separately:  Part Number 835 Guide Hinge Part Number 835/836 Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Pin

Read more less

Part Number 810R  Hoppe Multipoint Automatic Roller Bottom Gear Box Extension HLS9000 CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different. Info@WindowPartsCenter.com Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.  Style: Roller Comes with: bottom extension with gear box attached (top extension SOLD separately see part number 820R for top extension these are for Hurd doors only. For other brand doors please email for worksheet to fill out for a quote)  The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Handing: Non handed latch is reversible. See video on how to change latch handing  Associated Parts Sold Separately: 820R - Hoppe Multipoint Automatic Roller TOP Extension HLS9000 813 -  Hoppe 3Pt Convert Auto Release Striker  833 -  Hoppe 3Pt Convertible Under plate  834 - Hoppe 3Pt Striker For Rollers 819 - Hoppe Multipoint Latch Plate  S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N Other Hoppe Multipoint and Single Point We Stock: 810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000 820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000 825 - Hoppe Single point Gear Box For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation 810R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number. 

Read more less

Part Number: S3004 - Sold Individually  Hoppe Handle Set Screw Size: 6M x 12 mm 304SS 

Read more less

Part Number: 880 GU Latch and Dead Bolt Strike Plate Handed: Left Hand, Right Hand Colors:  Stainless Steel  Special order color: Oil Rubbed Bronze (special order items - no returns allow 2-3 weeks lead time) Discontinued Colors Once stock is gone no longer available: Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

Part Number 838 Weatherstrip used on Hurd Classic In swing patio Door with Fiberglass Sill built Prior to 2010Length: 6 foot Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples Color Bronze Limited quantities available as this product is no longer manufactured 

Read more less

Part Number: 840 Current Style Active  Amesbury Truth Sentry® .63 and Sentry® .03 Used For GU Multi Point Hardware ACTIVE HANDLE SET* (Hurd and Sierra pacific) Active handle sets come keyed with thumb turn and are for single door or the primary active door panel on a French door. 10 Inch Escutcheon NOTE TO CUSTOMER: As of March 20 2017 the OLD STYLE 8.9375 long Escutcheon was discontinued by the manufacture (mounting screw hole where 7 5/8" center to center. The new style has 10" long Escutcheon (Mounting screw holes are 8.5" center to center). Note this height change does alter the placement of our mounting holes. Bottom mounting screw hole will be reused, but the customer will have to drill one new top mounting screw hole. The old mounting screw hole will be covered by the escutcheon.  All handle sets will be shipped with the new 10 inch taller escutcheon plates. Please note a new mounting hole will be necessary. Field instructions (see pictures for drawings with dimensions).  Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time. Finish Options for Different Styles:  (All styles are not available in every finish color) Classic Escutcheon with Traditional Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Champagne Oil Rubbed Bronze FB**  Polished Chrome Satin Nickel White Classic Escutcheon with Loft Handle  Antique Brass Brushed Chrome Oil Rubbed Bronze FB (forever bronze not true oil rubbed bronze that will change) Polished Chrome Satin Nickel White  Contemporary Escutcheon with Loft Handle Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Squared Contemporary Escutcheon with Contemporary Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.Used on Hurd Inswing and outswing patio doors all wood and wood clad 2006 - Present - Direct Replacement For 2005 models as well *For Semi Active handle set see part number 841 Has thumb turn no keyed lock- To be used on a secondary door panel on a French door  that has shoot bolts that are operated and locked into place by the handle set. *For dummy handle see part number 842 no operation no thumb turn - To be used on a secondary door panel on a French door that is fixed in place with no operation or has manual shoot bolts that are not operated by the handle set. **FB = forever bronze so it will not change color over time like a true oil rubbed bronze would.

Read more less

Part Number: 829 Hoppe Split Shaft only screws sold separately (See Part Number: 840-031 Set Screws or S3004 - metric 6-10) Shaft Size Order By Length:  3 15/16 inch ( 5/16 inch x 3 15/16 inch or 8 mm x 100 mm) For Doors Smaller 1 3/4 inch thick Can be used as a replacement split shaft for old GU handle sets 4 21/64 inch (5/16 inch x 4 21/64 inch or 8mm x 110 mm) For Doors Smaller than 1 3/8 inch thick 4 11/16 inch (5/16 inch x 4 11/16 inch or 8 mm x 120 mm) For 1 3/4 Thick Doors Commonly used on Hurd and Truth hardware 5 1/2 inch (5/16 inch x 5 1/2 inch or 8 mm x 140mm) For 2 1/4" thick doors 6 1/4 inch (5/16 inch x 6 1/4 inch or 8 mm x 160 mm) used with the 1" Hoppe Handle extension part # 828 sold separately Commonly used on Hurd and Truth hardware that has extension 828   See figure F in drawing for correct split shaft spindle position installation.  Associated Parts Sold Separately:  6 1/4 is used with the 1" Hoppe Handle extension part # 828 Part Number: 840-031 Set Screws pack  Part number S3004 - metric 6-10 screws

Read more less

Part Number: S2024 Swinging Door Frame Large Kerf Weather Stripping Adapter Kit   Made to fit approximately 1/4 inch to 3/8" kerf size Each Kit Includes: QTY 3 Adapters and QTY 3 Bronze, Brown, or Black Weather Strip Seals (to do both sides and head of 1 door frame)  Color is totally dependent upon what the factory manufactures during each mass production. Length:  82 inches per pc (cut to fit your door width and length). Color: Bronze Bulk Discount Applied In My Cart: QTY 2-5 10% QTY 6-9 20% QTY 10+ 30% Used as replacement option for Peachtree Entry Doors, early Prado series and more.  For 8 foot tall doors please email or text for quote  

Read more less

Part Number 827 - SOLD Individually  Hoppe Backplate Bushing  -  (handle set or other parts not included) This Hoppe Backplate Bushing is for Hoppe Swinging Patio Doors System ONLY. Color: Clear Gold Opaque  HANDLE BUSHING HFW F12 BACKPLATE MANUFACTURER: A/35/14 914 RL 750 16S 85 Used on Hurd handle set from 2004 and prior - See picture to match your handle set to correct bushing kit for Hurd DoorsThis Hoppe Backplate Bushing is for Swinging Patio Doors System ONLY.  

Read more less

Part Number D308 Mortise Lock Drive Rods Handset Spindles Shaft Pack of 2 7 mm square x 18 mm long For Trilennium, W&F and Endura handle sets

Read more less

#834 - Hoppe 3Pt Striker For Rollers - Auto - Bright Brass Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #833 - Hoppe 3Pt Convertible Under plate    

Read more less