Swinging Patio Door Parts

Part Number: S3001 Door Bottom Sweep Long Reach Kerf Sweep Replacement Door Sweep for your Therma Tru Door. Color: Brown Length: 35 3/16 Inch Long   

Read more less

Part Number 936 - Flex Weather Strip For Out Swinging French Patio DoorColors: White, Sand and BronzeSize: 7 foot pc Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples 8 foot pc available for special order please e-mail info@WindowPartsCenter.com to order This weather strip is sold by the stick - DOES NOT COME IN A ROLL Known to have been used on Hurd and Sierra pacific doors

Read more less

W&F Door Handle Solid Shaft Replacement Part Aluminum  1- 37/64" (40.1 mm)  long x  9/32" (7.1 mm) tall Associated Parts Sold Sold Separately: Part Number 701 W&F Single Handle Bushing Kit W&F Interior and Exterior Replacement Handles W&F Door Handle Solid Shaft 870 - W&F Handle Extension  

Read more less

Part Number; 861 Door Bottom Seal / Door Sweep Color: Bronze OnlySize: 29 7/8 inch, 60 inch and 72 inch Long pcs only (samples can not be returned) Brands Known to be used on but not limited to: Hurd Out Swing Energy Saver Patio Doors and other door brands.

Read more less

840-027- Amesbury Truth GU Handle Set Thumb Turn Snap Ring - Swinging Patio Door Hurd Sold individually - Comes in Large and Small, black and Sliver  Large inside diameter is approximately 17/32" Small inside diameter is approximately 27/64"  Large and small snap ring are shown on a thumb turn see picture  Discontinued Product. If it's in stock we have it. No returns all sales final.   

Read more less

Part Number: D302* W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black   Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Active Modified 180 Degree* - Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for older multi point and double bore systems see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case bases by the manufacturer. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

Read more less

Part Number: S4011 - SET Hinge Hoppe Adjustable Door Hinge Non Removable Hinge - Set Hinge Vertical Adjustment  S4011 is Vertical Adjustment ONLY Watch video and read instructions in pictures (For Horizontal adjustment see part number S4012 Sold Separately and see hinge placement guide in picture) No Screws Included, sold individually  Handing(see pictures) : Left Hand Hinge Used For: Left Hand In swinging (LHI) or Right Hand Out Swinging (RHO) Right Hand Hinge Used For: Right Hand In Swinging (RHI) Left Hand Out Swinging (LHO) SEE  Hoppe "Application Diagram for Set Hinge” TO DETERMINE WHAT HANDING HINGE TO ORDER Pre-Order are Special order items, no returns  Made out of Brass or Aluminum. Multiple finishes to choose from.  Material: Made out of Brass or Aluminum. Finish: Multiple finishes to choose depending on material used. Aluminum is a painted finish where Brass is a living finish. Example: Oil Rubbed Brass is a live finish - each hinge finish is unique and will naturally develop a patina, changing its color and depth over time- this is NOT a finish defect.  Designed for a Greater Advantage• Adjusts vertically ( Use Set Hinge Part # S4011) and  for horizontally ( see Guide Hinge Part # S4012) by 1/8" for a perfect swing. - see Installation Instructions page 1 number of hinges chart for application. • Vertical Adjustment is on BOTTOM of the hinge it is silver metal. To access by removing the cap. If inside looks black plastic that is the top of the hinge and NOT the adjustment (see video below and factory adjustment instructions in pictures). • Brass hinges feature finial caps as shown• Aluminum hinges feature flush caps.• Large 3/16" hex head screws make adjustments effortless. Remove the finial in the set hingeto access the hex screw.• Single pass routing for quick and easy installation.• All Set and Guide Hinges are equipped with non-removable pins for security, making HOPPEAdjustable Hinges the ideal solution for both inswing and outswing doors.• Especially designed for larger doors, with a panel weight capacity of up to 330 lbs.Tested to a Higher Standard• Brass hinges are tested beyond an impressive 2.5 million cycles, in accordance withANSI A156.1 Grade 1 – Commercial test procedures.• Backed by HOPPE's Limited Lifetime Mechanical Warranty.Finished with Superior QualityHOPPE's Brass and Aluminum Hinges are outstanding corrosion resistant materialsHOPPE uses their Resista® Limited Lifetime Finish Warranty on four of their select premiumfinishes. The Aluminum Hinges have a high quality powder coating finish.  Installation Set and Guide Hinge Placement:3 Hinges Per Door Panel Up to 165 lbs: Starting at top of door Top of door Guide (Use Part# S4012) Set (Use Part# S4011) Guide (Use Part# S4012) 4 Hinges Per Door Panel Up To 165 lbs:Starting at top of door Top of door Guide (Use Part # S4012)  Guide (Use Part # S4012)  Set (Use Part# S4011) Guide (Use Part # S4012) 4 Hinge Per Door Panel 165-330 lbs Starting at top of door Top of door Guide (Use Part # S4012)   Set (Use Part# S4011)  Set (Use Part# S4011) Guide (Use Part # S4012) 5 Hinges Per Door Panel Up To 165-330 lbs:Starting at top of door Top of door Guide (Use Part # S4012)  Guide (Use Part # S4012) Set (Use Part# S4011)  Set (Use Part# S4011) Guide (Use Part # S4012)  The Set hinge no matter what is always the 2nd from the bottomPro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Known to have been used on: Sierra Pacific Doors, Ashworth and many other

Read more less

840-006 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door. Replacement Door Handle only all other parts sold separately. Discontinued Product. What we have in stock is all that is available.  No returns, all sales final, finishes color variation due to true metal finish and minor scratches.   

Read more less

Part Number: S4014 S4014 Hoppe Millennium Adjustable Hinge - 2-D Guide Hinge with Non-removable Pin Horizontal Adjustment  - Hinges are Non Handed. Works for both Left hand and Right hand swinging doors. Known to been used on WeatherSheild and Peachtree Doors Colors Still Available: Stainless Steel  Discontinued Colors: Oil Rubbed Bronze, Antique Brass, Brass, Brushed Chrome Pat.Nr. 5.701.636 122190600, 850-8754743 Set and Guide Hinge Placement: 3 Hinges Per Door Panel - Up to 165 lbs: Starting at top of door Top of door Guide - Part Number S4014 Set - See Part Number S4013 Guide - Part Number S4014 4 Hinges Per Door Panel -Up to 165 lbs: Anytime you need 4 hinges you would just add another guide hinge Starting at top of door Top of door Guide - Part Number S4014 Guide - Part Number S4014 Set - See Part Number S4013 Guide - Part Number S4014 4 Hinges Per Door Panel - 165 - 330 lbs: Starting at top of door Top of door Guide - Part Number S4014 Set - See Part Number S4013 Set - See Part Number S4013 Guide - Part Number S4014 5 Hinges Per Door Panel - 165 to 330 lbs: Guide - Part Number S4014 Guide - Part Number S4014 Set - See Part Number S4013 Set - See Part Number S4013 Guide - Part Number S4014 Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Known part # 850-8754731, 850-8754743,122190600  General HOPPE Adjustable Hinge Adjustment Instructions: Determine hinge locations on the frame and door panel. Recommended hinge positions are given in the Set and Guide Hinge Placement Table above. Prepare the door panel and frame. Fasten hinges into the door panel. #10 ANSI wood screws with a minimum length of 1 1/4” are recommended. The Set Hinge must be installed according to the installation label. The label on the frame leaf will point down to the sill when properly installed. On the frame, use #10 ANSI wood screws that are 5/8” to 3/4” long in three of the four screw locations. One screw on each hinge should be at least 1 1/2” long to reach the stud. This screw is typically left out and is installed after the door is positioned in the rough opening. Install the frame leaf of the Set Hinge into the routing on the frame and fasten securely. Do not allow the Set Hinge(s) to support the weight of the panel without installing the Guide Hinges. Install the frame leaf of the Guide Hinges into the routings on the frame and fasten securely. Leaves on the Guide Hinges will slide freely up and down for alignment with the rout. Do not adjust hinges prior to the final installation into the rough opening. This will affect the ability of the door installer and end user to utilize the full adjustment range of the HOPPE Adjustable Hinge. Disassembly Do not attempt to remove the hinge pin, as this may cause damage. To disassemble the door panel from the frame, support the weight of the panel to relieve the weight from the hinges. Carefully remove either the frame leaf screws or door leaf screws to displace the panel. Adjustment Instructions Introduction There are two types of HOPPE Adjustable Hinges on each door panel: Set Hinge: One or two per panel. The Set Hinge provides ± 1/8” vertical adjustment. Guide Hinge: Two or three per panel. The Guide Hinges provide ± 1/8” horizontal adjustment. Look for the visible adjusting screw on the door sash leaf. This identifies the hinge as a Guide Hinge. Hinge designs may vary, but adjustment remains the same. Required Tools A 3/16” hex wrench is required. A small flat head screwdriver is required. A plastic putty knife is recommended. Vertical Adjustment for Doors with One Set Hinge With the door closed or open: Remove the press-fit Finial Cap from the bottom of the Set Hinge to expose the adjustment screw. Use the small screwdriver for Set Hinges featuring a plastic Finial Cap. A plastic putty knife is recommended for Set Hinges featuring a brass Finial Cap. Insert the hex wrench into the bottom of the Set Hinge. Tighten the screw to raise the panel and loosen to lower the panel. Reinstall the Finial Cap removed in Step 1. Vertical Adjustment for Doors with Two Set Hinges With the door closed or open: Remove the press-fit Finial Cap from the bottom of the Set Hinge to expose the adjustment screw. Use the small screwdriver for Set Hinges featuring a plastic Finial Cap. A plastic putty knife is recommended for Set Hinges featuring a brass Finial Cap. To raise the panel, insert the hex wrench into the top-most Set Hinge and tighten the adjustment screw to achieve the desired Insert the hex wrench into the other Set Hinge and tighten the adjustment screw 1/8 turn past the onset of resistance to distribute the panel weight evenly between both Set Hinges. To lower the panel, insert the hex wrench into the top-most Set Hinge and loosen the adjustment screw as far as possible without Insert the hex wrench into the other Set Hinge and loosen the adjustment screw to achieve the desired adjustment. Retighten the adjustment screw on the top-most 1/8 turn past the onset of resistance to distribute the panel weight evenly between both Set Hinges. Reinstall the Finial Caps removed in Step 1. Horizontal Adjustment With the door open: Insert a 3/16” hex wrench into the horizontal adjustment screw. Turn clockwise to decrease the margin and counterclockwise to increase the margin on the hinge side.

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available840-009 - Amesbury Truth GU Handle - Set Screw and Shaft Type - Swinging Patio Door Hurd. Replacement handle only. All other replacement parts sold separately.  Discontinued Product. What we have in stock is all that is available. No returns, all sales final. Some may have minor scratches.  GU, Amesbury Truth, Hurd

Read more less

840-005 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door. Replacement Door Handle only all other parts sold separately. Discontinued Product. What we have in stock is all that is available.  No returns, all sales final, finishes color variation due to true metal finish and minor scratches.     

Read more less

Part Number 820R  Hoppe Multipoint Automatic Roller Top Extension HLS9000 for HURD DOORS ONLY CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different.  Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.  Style: Roller Top Extension ONLY Size we stock: (see chart for full details and measurements):  6-8 = Top Extension Length 1019mm / 40.11in Retro = Top Extension Length 1031mm / 40.59in 6-10 = Top Extension Length 1078mm / 42.44in 8-0 = Top Extension Length 1407mm / 55.39in Comes with: Top extension ONLY (Bottom Extension with Gearbox SOLD separately see part number 810R for bottom extension with gear box)  The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd and other door manufactures – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Associated Parts Sold Separately: 810R - Hoppe Multipoint Automatic Roller Lower Gearbox with Extension HLS9000 813 -  Hoppe 3Pt Convert Auto Release Striker  833 -  Hoppe 3Pt Convertible Under plate  834 - Hoppe 3Pt Striker For Rollers 819 - Hoppe Multipoint Latch Plate  S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N Other Hoppe Multipoint and Single Point We Stock: 810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000 820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000 825 - Hoppe Single point Gear Box For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation 810R/820R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number. 

Read more less