1200 series Handle Set 6" Center to Center Bore (W&F Handle) Discontinued No longer Available once our AS IS stock is gone Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore
Condition:
As Is - New product that is unused. Either: discontinued item and only what we have in stock is available, old stock, a customer return, vendor sample, or came in from the factory with finish flaws. May or may not have finish flaws or scratch’s. In some instances, these items are repackaged. Not available in all colors or handing. All sales final, No returns. If you can add to cart it is in stock.
Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1). Part number 852 is the replacement style for the 6” center to center double bore backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below).
W&F Replacement Parts Sold Sold Separately:
W&F Interior and Exterior Replacement Handles
W&F Door Handle Solid Shaft
870 - W&F Handle Extension
701 Bushing Kit
NOTE! 852 only works for 6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or 2 1/8" multipoint bore and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )
*Additional Finish Manufacturer Warranty info: Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.
Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.
1200 Series Handle Set 6" Center to Center Bore (Weather Shield Handle)Discontinued No longer Available Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore
Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1). Part number 852 is the replacement style for the 6” center to center double bore backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below). .
W&F Replacement Parts Sold Sold Separately:
W&F Interior and Exterior Replacement Handles
W&F Door Handle Solid Shaft
870 - W&F Handle Extension
701 Bushing Kit
NOTE! 852 only works for 6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or 2 1/8" multipoint bore and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )
This W&F Handle Set 6" Center to Center Bore (Hurd Handle) Discontinued No longer Available Click Here to Replace with Part Number 852 Handle Set Handle Set 6" Center to Center Double Bore
Old Style Handle Set is NLA (known number stamped on some old handles: pat no 4,671,089 D 295 829 Other Pat. Pending 1200-2-1).
Part number 852 is the replacement style for the 6” center to center double bore backsets - dead bolt and latch. and Mounting screw holes of 6 1/16" center to center (see pictures & video below).
W&F Replacement Parts Sold Sold Separately:
W&F Interior and Exterior Replacement Handles
W&F Door Handle Solid Shaft
870 - W&F Handle Extension
701 Bushing Kit
NOTE! 852 only works for 6 inch center to center 2 1/8" standard double double bore with latch and dead bolt (see video below). (If you have the W&F multipoint hardware with 6 inch center to center 1 7/8" or 2 1/8" multipoint bore and screw holes are 5 3/16" center to center see part number: D300, D301, D302, D303, D304 or D305 )
*Additional Finish Manufacturer Warranty info: Warranty is for original consumer/purchaser Proof of product purchase is required. for Bright Brass, Stain Nickel and White only have a 1 year manufacturer warranty. Warranty does not cover normal wear and discoloration of Finishes, damage caused by scratches or abrasions, or any product that has been improperly installed, abused, worn out, altered or used for a purpose other than that for which it was intended, or used within 10 miles from the sea coast or body of salt water, or in a manner inconsistent with any instructions regarding its use or recommended care and maintenance, or that has been exposed to solvents, chemicals, or other harsh environments or foreign substances including any airborne foreign substances.
Pricing subject to change - cannot retro active any pricing on previous orders or hold pricing for future orders.
This handle set is a Discounted Old Style No longer Manufactured
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
Antique brass handleset. Sold as is shown in picture. All sales final. NO returns.
Contains inside and outside handles, keyed cylinder with 2 keys, 2 screws and instruction sheet.
DOES NOT contain mortise box, keeper, keeper finder or hex key wrench.
Ideal for replacing damaged handle or changing hardware color on an exsisting door with working mortise box and keeper.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is Only available as a kit now see part # 555
Part number 501-002
Double-Hook Mortise Lock Keeper (Truth Hardware)
Comes with 1 Mounting plate keeper as shown in picture
501-002 is a Discontinued Old Style No longer Manufactured once our stock is gone it will Only available at a kit now see part # 555
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
501-002 Sliding patio door Keeper- AmesburyTruth- Hurd Sliding Door
Comes with 1 Mounting plate keeper
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Known part number: 4-5034
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is Only available as a kit now see part # 544
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
501-003 Sliding patio door replacement handle- Amesbury Truth- Hurd Sliding Door. Energy Saver style
Handle is non handed. Comes with 1 handle, 2 screws and 1 Allen wrench.
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is Only available as a kit now see part # 544
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
501-004 Sliding patio door replacement Exterior Faceplate- Amesbury Truth- Hurd Sliding Door. Energy Saver Style
Discontinued Product. Sold as is (see picture). No returns all sales final. What we have in stock is all that is available.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is Only available as a kit now see part # 544
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
501-005 Sliding patio door replacement Interior Faceplate- Amesbury Truth- Hurd Sliding Door.
Interior Faceplate Only
Energy Saver Style
Discontinued Product. Sold as is. No returns all sales final. What we have in stock is all that is available.
For Elite Sliding Clad (CHES) DoorShim For Old Style C Elite Handle that are on Hurd sliding patio doors made from 1993 - 2006
This Shim only works with Old Style CHES Elite "C" Handle Set part # 038545, 085472, 085474
This shim will NOT work with new style C-Elite handle # 522
W&F Upgrade Handle (All Brass) Is No Longer Available. Use replacement options below.
How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order!
Verify you have the "B" screw hole position on your W&F mounting plate (see picture) If you find you have the "A" Screw Hole Click Here
Please watch videos below!
Parts to order:
1. Handle set:
Part Number S3006 Handle Set Center Latch for "B" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for faction explanation.
2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the S3006 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following
# 518 Gray cylinder 45 degree
# S3007 45 Degree
#S3011 45 Degree
If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts.
3. Binding Post Screw - as shown in the how to video the replacement handle set is not as long as the old W&F handle set you are replacing. You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw.
Part# 546 - your choice of finish
Additional Info:
S3006 Handle Set Function Explanation:
Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item.
Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts)
Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!
Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version. See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws.
Known Part Numbers On W&F Handle : P/N 120-50, PAT. # 5,092,114
Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144
Video is for "A" but installation is the same for the "B" placement (video shows a Hurd Classic Sliding Patio Doors that Used W&F Brass and Wood handle Set)
Discontinued Product No Longer Available- no replacement option known.
524 Adams Rite Sliding Patio Door Handle-
5 1/2" Hole Spacing
Manufacturer: Adams Rite
Adams Rite 5302 sliding Patio door handle.
Used On Hurd Sliding Patio Door
Discontinued Product No Longer Available- Some parts are in stock. Once gone we will not be able to get more.
Discontinued Product No Longer Available- no replacement option known.
As is - old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available.
524-001 Adams Rite Sliding Patio Door Exterior Handle
Manufacturer: Adams Rite
5 1/2" Center to Center Hole Spacing
Discontinued Product. What we have in stock is all that is available. Sold as is no returns all sales final.
Free Economy Shipping for most USA orders. Canada and International shipping options available at check out (does not include import fees, taxes or duties).
Free Economy Shipping for most USA orders. Canada and International shipping options available at check out (does not include import fees, taxes or duties).
