Part Number: S3029
Amesbury Truth DS Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly
single-point sliding door lock is the work-horse in the industry, with proven reliability and strength. We incorporate a variety of trim-plate options, making our system compatible with all standard fabrication in the market today.
Can withstand forced entry loads in excess of 1000 lbs. Hook bolt has anti-slam feature that will retract the bolt if the boor is extended Adjustable reach hook bolt is actuated by 90 degree rotation of the hub
Manufacture: Amesbury Truth
Material: Standard or Stainless
Cylinder: 45 Degree
Faceplate mounting screw holes: 4 5/8 inch center to center
Known Part Number: 555, 555-84
Have known to been used on:, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, and more
Videos below show different part number but install principles are the same:
DISCONTIUNED PRODUCT S1015 SafeGard "Gen 1” is the “Old Style" with the red plastic part has been discontinued. SafeGard 2R the "New Style" In the Narrow Style is the replacement for residential applications according to Truth. There is also a Standard Style. We recommend to check with your window manufacture which style to purchase for your window.- Click here for Link to SafeGard 2R New Style
INFOATION BELOW FOR REFERANCE ONLY AS GEN 1 IS A DISCONTUDED PRODCUT
SafeGard™ Gen 1 - Operating Control Device (WOCD) For Casement Windows
SafeGard Gen 1 Overall Track Size (Track is the part with Red clip at the end):
6 3/8" Long x 3/4" Wide X 1/4" Deep
Handing: Left Hand Or Right Hand (Part is marked L or R on red plastic part )
Ordering Instructions for Safegard Gen 1 Old Style - that has red plastic part:
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window (See Fig. 2). The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep.
The SafeGard™ the Industry's first limiting control device offered for casement windows
The SafeGard™ Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The ASTM F2090 addresses window fall prevention, that helps protect against potential falls by children through open windows.
The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4".
As required by code, the SafeGard™ Limit Device has a two (2) action operation to fully open the window for egress purposes. This operation can be performed without the use of keys or tools.
Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset automatically when window is in closed position.
The SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran cover and tab.
The SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more stringent safety requirements. Please consult local building codes for WOCD and applicable requirements
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. Note: The SafeGard™ Limiting Control Device will only work in casement windows that have a standard 2-bar hinge cavity with measurements as stated above.This Device is Not Designed for Awning Windows.This Device is Not Designed for Case-ment Windows with a 4-Bar Hinge.
Known Part Number: 39-933LH and 39-933RH, Truth 14151.2
Part Number SP20001
Amesbury Truth Casement Awning UTO Escutcheon
Not a stock item please allow 2-3 weeks for your order to ship.
Handing: None
Color: White, Brushed Chrome, Bright Chrome, Coppertone, Bright Brass, Satin Nickel, Bronze, Oil Rubbed Bronze, Chestnut Bronze, Black, Matte Black, Antique Brass, Bright Nickel, Western Pewter. Some colors can have longer lead times -see color chart
Known to have been used on: Sierra pacific aspen and aspen 2 Casement and awning windows.
Associated parts Sold Separately:
Part Number SP20000 - UTO Lock Assembly For Casement Windows
Part Number SP30000 - UTO Lock Assembly For Awning Windows
Part Number SP20002 - UTO Lock Handle
Part Number 137 - Operator Cover and handle
Part number 119 - Casement Operator Dual Arm
Part Number 147 - Casement Operator Dyad Arm
Part Number 158 - Casement Operator Straight Arm
Part Number 207 - Awning Operator
Part Number S1082
Amesbury Truth Casement Dyad Operator With Link Offset Up 15/64”
Square Housing has been discontinued by manufacturer. You will receive the new Ellipse style housing for this operator as shown in picture
Operators are handed. View pictures to determine what handing you need to order.
Colors: White, Goldtone
Known As: Wright and Truth
Known Part Number Stamped On Housing: 45251
end of the operator arm attaches with a metal clip (clip comes installed in the end of the operator arm see video in pictures on how the clip attaches to a sash bracket- sash bracket sold separately)
Operators with Similar Housing But Different Arm Lengths:
Part Number S1082 - Truth/Wright Dyad Operator
Part Number S1048 - Truth/Wright Dyad operator
Part Number S1068 - Truth/Wright Dyad Operator
Part Number 111 - Truth/Wright Split Arm Dyad Operator
Part Number 105 - Truth/Wright Straight Arm
Part Number 115 - Truth/Wright Straight Arm
Part Number 109 -Truth/Wright Straight Arm
Part Number 112 - Truth/Wright Straight Arm
Part Number S1037 -GU - Split Arm Dyad Operator
Part Number S1038 GU - Split Arm Dyad Operator Kit
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available840-009 - Amesbury Truth GU Handle - Set Screw and Shaft Type - Swinging Patio Door Hurd.
Replacement handle only. All other replacement parts sold separately.
Discontinued Product. What we have in stock is all that is available. No returns, all sales final. Some may have minor scratches.
GU, Amesbury Truth, Hurd
840-005 Amesbury Truth GU Handle Snap Ring Style - Swinging Patio Door.
Replacement Door Handle only all other parts sold separately.
Discontinued Product. What we have in stock is all that is available.
No returns, all sales final, finishes color variation due to true metal finish and minor scratches.
part number 791
Window Grid Retainer - once old style stock is gone the bee style will automatically ship in its place Sold In Packs of 2
Color: Clear7/8" Slide Pin - Regal Double ProfileFor Hurd Windows, Prime-Line and other Window Brands with removable grille surrounds
part number stamped on new style: W8733
Part Number: 533
Manufacture: Amesbury Truth
Known to have been used on: For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts
Old Style Stamped on part: 2153
Works as a replacement option for W&F keeper that has been discontinued
714 - H3 Sash Weather Strip Awning and Casement
Color: White, Bronze, Sand.
Sold by the foot Rolled: (example if you order QTY 1 you will receive a 1 foot long pc of weather strip) Larger QTY's maybe shipped in multiple rolls. Example if you order 300 feet you may receive QTY 6 - 50 foot rolls. Some rolls maybe in increments of 25 feet. (for full spool order 1250 feet)
no returns of rolls of less than 25 feet
Returns will only be accepted for full uncut rolls in increments of 25, 50 and 100 feet.
1000 feet + orders - no returns**
**Can have a lead time if not in stock no order cancelations or returns
Bulk Pricing Calculated Once Added To Cart and entering QTY you want to order.
Known to have been used on Hurd Sierra pacific Gen II H3 Windows
Part Number 964 - Nailing Fin Corner Pad
window installation supplies
For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)
Sold In: Set Of 4 as shown in picture
Color: Black
Stick On
