Hurd Sliding Door Parts

45 products


  • 528 - Patio Door Screen Roller Pack Of 2 White / No Parts

    528 - Patio Door Screen Roller - pack of 2

    2 reviews

    177 in stock

    528 - Patio Door Replacement Screen Rollers  Part Number 528 - Replacement Screen Rollers - For Sliding Patio DoorsSize: See Photos for measurements. 2 Inch Long Overall  with 1" steel wheel-ball barring.Sold in: Set of 2 per pack 1 left and 1 right In Stock:  All Metal and White Low QTY: Sand and Bronze are low stock discontinued item. If you can add to cart we have it in stock still. Once gone the all metal is the direct replacement. Colored Adjustment  : White, Sand and Bronze - due to industry shortages we are unable to get these at this time. if you can add to cart we have them in stock if you can not add to cart they are not available to order and you will need to use the all metal style.  Screws: Replacement screws are sold separately Click Here to add to order If you want to replace both top and bottom rollers (total of 4 rollers) you will need to purchase QTY 2 packs. These parts are NEW- Marks found on roller adjustment are not defects. Rollers come pre packaged by the manufacturer. The “marks” you see on the sand and white adjustment are from the molds they use to make the parts and put them together. This parts were used on Hurd doors prior to 2006.Known Brands and Part Numbers: 025701, 025702, 025703, 23739000000, Hurd, Crestline, ParkVue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Peachtree Citadel Door Roller, Semco, Marvin and more. *Note to customer* there are a wide verity of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489    

    177 in stock

    $ 30.00 - $ 39.00

  • 520 Sliding Patio Door Panel Rollers - Steel Ball Bearing Known Brans and Part #'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield and more.

    520 Sliding Patio Door Panel Rollers - Steel Ball Bearing

    31 in stock

    Part Number: 520 Sliding Patio Door Panel Replacement Rollers - Steel Ball Bearing Sold Individually  (2 required per door)  5 3/4 inch long from Center of screw hole to center of screw hole 11/16" thickness 1 1/4 wheels  Style: Heavy duty for wood clad patio doors ( 1 roller weights 9.3 oz). Light duty for vinyl patio doors (1 roller weights 6.6 oz) Known Brands and Part#'s: 520, 012021, Hurd, Crestline, Park Vue, Merrill Millwork, Kolbe & Kolbe Millwork, Weather Shield, Semco and more.Known Part # 012021, PVS15, HWTR01 *Note to customer* there are a wide variety of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489  

    31 in stock

    $ 25.00 - $ 49.00

  • Known Part Numbers On Hurd W&F Handle : P/N 120-50, PAT. # 5,092,114

    516 - W&F Upgrade Handle Handle Set Brass and Wood Handle - See Description to Order Replacement Option

    Out of stock

    516 - W&F Upgrade Handle (Brass and Wood) Is No Longer Available. Use replacement options below. How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order! Verify you have the "A" screw hole position on your W&F mounting plate (see picture)  Please watch videos below! Pictures and video show a Hurd Classic Sliding Patio Doors that Used W&F Brass and Wood handle Set.  If you find you have the "B" Screw Hole Click Here Parts to order: 1. Handle set: Part Number 522 Handle Set offset latch for "A" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for faction explanation.  2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the 522 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following # 518 Gray cylinder 45 degree (Hurd Brand Doors and others) # S3007 45 Degree (other brand doors) #S3011 45 Degree (other brand doors) If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts. 3. Binding Post Screw - as shown in the how to video the 522 handle set is not as long as the old W&F handle set you are replacing.  You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw. Part# 546 - your choice of finish 4. White Shim - as shown in how to video you door thickness may require a shim. Shim is known to be needed on Hurd Doors Part Number: 522SHIM Additional Info: 522 Handle Set Function Explanation: Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts) Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.  See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws. Known Part Numbers On  W&F Handle : P/N 120-50, PAT. # 5,092,114  Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144 If your mounting plate and handle uses the "B" Screw Holes See Part Number S3006 Replacement Kit

    Out of stock

    $ 0.00

  • Sash Controls Offset Latch - C Elite Handle Set

    522 C Elite Handle Set - Offset Latch

    45 in stock

    Part Number 522 Sash Controls C Elite Keyed Handle Set with Offset Latch - Sash Controls  Face plate is 8 1/2" long x 1" wide (new style) Handle 5 1/2" Center to Center (CTC). Screw Holes are 3 15/16" Center to Center (CTC). (For Center Latch Style Handle Set see part # S3006) 2265 can be stamped on back of plate. Mortise lock box sold separately. Tailpiece can be cut to fit multiple thickness doors. (We cannot accept returns if the tailpiece has been cut).  Style (Function): Non-keyed, Keyed and Dummy Non-Keyed handle sets: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed handle sets: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door. If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts). Also see instructions that come with the handle set that is also pictured above Dummy Handle Sets: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Allow 3-4 week lead time once order is placed. Dummy Handle sets DO NOT need a new Mortise lock! Most colors are stocked. If a product is not in stock allow a 2-5 week lead time once order is placed. We will notify you on lead time if a product is not in stock.  If your Recessed Mortise Lock has the 90 degree black cylinder  you will need to purchase a new recessed mortise lock part # 518, S3007 or #S3011 with the 45 degree gray/silver cylinder for this handle set to work. Both mortise box work with handle # 522 so you will need to choose the type that your door panel is machine prepped for. Associated Products Sold Separately:  Part Number: 518 Mortise Lock  Part Number: S3011 Mortise Lock Box Part Number: S3007 Mortise Lock Box Part number S3006 For Center Latch Version  Handle Set Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then, you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thicknesses, which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version. Also, see instructions that come with the handle set that are also pictured above. Never use power tools when installing handle sets you run the risk of stripping out the screws.  If you are using the 522 to replace the Old Hurd Wood and Brass Handle Set 516 for how to videos and full instructions please click here for how to page.

    45 in stock

    $ 76.00 - $ 430.00

  • 544 -Amesburytruth Signature Style Handle Set Two Point Locking For Sliding Patio Door

    544 -AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door

    Out of stock

    Part Number 544 Amesbury Truth Signature Style Handle Set Two Point Locking For Sliding Patio Door Signature Style Handle Set 40.94 and 40.68- Truth (mortise lock box and keeper not included)  Model:  Standard 40.94 - contour shape which is both elegant in style and easy to grasp. Contemporary 40.68 - sleek modern design resulting in a contemporary look that is sure to compliment your door system. (If replacing 40.68 on existing door with 40.94 with dual mortise lock you will need to purchase Contemporary style keeper sold separately)  Style: Active with key - handle set comes with 2 keys and keyed cylinder, for exterior locking and unlocking capability. Dummy - for 4 wide sliding patio doors, secondary panel. no locking capability. Product Used On Hurd Energy Saver Sliding Patio Door. Direct replacement for Old style Energy Saver Handle Set #501Special Order Item - No Returns - lead time 2-3 weeks.NOTE: Part # 501 Handle set that is a Truth part and used on Hurd Energy Saver Sliding patio doors was used up until about February 2014. The Current handle set is called their Signature Style #544 and is slightly different from the #501. However they are interchangeable and # 544 will work on your door. Some staining or touch up may be required but screw holes are the same. Related Product Sold Separately: Mortise Box and Keeper for Old Style 501 Handle Set: Used with Part # 555 - Amesbury Truth 2 Point Recessed Mortise Lock & Keeper Kit Current Style Mortise box part number 558 Current Style Keeper Part Number C1059 40.94  Contemporary style keeper sold separately  

    Out of stock

    $ 149.99 - $ 389.99

  • 518 Amesbury Truth Recessed Mortise Lock With 45 Degree Sliver Gray Cylinder

    518 Surface Mount Single Point Mortise Lock

    1 review

    12 in stock

    Part # 518 Replacement Door Mortise Lock for sliding Patio door Cylinder Color Style and Degree: Gray Style= 45 Degree Cylinder with faceplate  Face Plate Over All Dimensions: 6 1/8" Long x 3/4" Wide  Face Plate Top and Bottom mounting Screw Holes Center To Center Dimensions: 5-3/8"   overall depth 1-5/32 inch Black Style = 90 Degree Cylinder - will not come with faceplate customer will need to reuse their old one You must replace the mortise lock with the same version (you can usually determine this as the old cylinder where colored either Gray or Black. The angle of the Gray cylinder is at a 45 degree angle and the black is at a 90 degree angle) If you do not choose the correct one keyed cylinder will not fit/operate. If your Cylinder is silver or gold looking color you have the newer style determine which style you need by the slot degree inside the cylinder (see drawing for example the 45 degree cylinder) Manufacturer: W&F Known Manufacturing Brands Used on: Hurd, Peachtree, W&F *replacement and more Similar Looking Products With Different Dimensions:  Part Number C1033

    12 in stock

    $ 47.00

  • 555 - Amesburytruth 2 Point Recessed Mortise Lock & Keeper Kit Door Handle

    555 - AmesburyTruth 2 Point Recessed Mortise Lock with pocket face plate - Discontinued See Product Description for Replacement Option

    Out of stock

    ***STOP!!! read all info AND watch video below!!!!*** Part Number 555 is DISCONTIUDED. No Longer Available. The retro Fit Replacement option you will be shipped is part number 558 - please watch video below as you will need to mortise out wood from your door panel to make 558 work. To Purchase part Number 558 Click Here When purchasing new style 558 as a replacement for 555 you will also need new style keeper  C1059 which is SOLD SEPARATLY  click here for C1059 Old style keeper to go with # 555 SOLD SEPARATLY part number 501-002 click here for 501-002 keeper Double-hook Mortise Lock (Truth Hardware) with pocket face plate  AmesburyTruth Hardware  2 Point Recessed Mortise Lock  This fits Hurd / Sierra Pacific Energy Saver Sliding Patio Door Old Style and many other door brands Used on part number 501 handle set for sliding patio doors Known Part Numbers: 097182, 097180, 4-5033, 4-5034  

    Out of stock

    $ 0.00

  • 505 - Channel Weatherstrip Bottom Of Sliding Patio Door Panel Weather Strip

    505 - Channel Weatherstrip Bottom Of Sliding Patio Door Panel

    17 in stock

    Part Number: 505 Door Bottom Channel Weather Strip For Sliding Patio Door Size Length: 5-0 Door = 29 1/4 Inch Channel 5-4 Door = 31 1/4 Inch Channel 6-0 Door = 35 1/4 Inch Channel 8-0 Door = 47 1/4 Inch Channel Color: White Material: Vinyl Plastic Vinyl Dimensions: 3/4" Wide and flanges out to 13/16" Wide  X 1/2" Deep  x Length (see size options above) Description: U Channel Weather-strip for CHES/HES Hurd Sliding Patio Door. The metal channel is for older Hurd “Classic” doors and the plastic one is for “Energy Saver” doors. If you have the old metal we recommend you purchase the longest length(8-0) and retro fit like our how to video shows below.Metal Style NLA will have to retro fit by using the plastic part - the fuzzy weather strip will be installed toward the exterior on the door panel. Please watch how to video below.The Metal Dimensions (NLA): 5/8" wide at metal top and ¾” wide at fuzzy weather strip side x ½” deep x length depending on door sizeThe Plastic Vinyl Dimensions: 3/4" Wide X 1/2" Deep x length (see size options above)***505 part can only be retuned if its in new, unused uncut condition*** Associated Pars Sold Separately: Part Number 526 Parting Stop - wood part that 511 snaps into Part Number 513 Vinyl Side Stop weather strip Used along with 511  Part Number 527 Wood Side Stop that 513 snaps into Part Number 511 Weather Strip Part Number 520 Rollers Known to have been used on: Hurd, Sierra pacific, Park Vue, Weather shield and many other patio door brands. ***505 part can only be retuned if its in new, unused uncut condition***

    17 in stock

    $ 45.00 - $ 65.00

  • 559 Acer Replacement Rite And Metal Industry Screen Door Roller PSR97- Sold Individually Parts Part Number 10-410  UPC 715384055644

    559 Replacement Rite and Metal Industry Screen Door Roller

    62 in stock

    Part Number: 559 Sold Individually Replacement for Rite and Metal Industry Screen Door Rollers (Adjustable) Sold Individually. QTY 2 needed per screen Wheel: Ball bearing wheel (1 inch O.D). Material: Nylon Wheel, Steel Wheel, or Stainless Steel Wheel Each Roller Comes with: 1 Screen Roller, 1 Adjustment Screw and 1 Adjustment Screw Caps (cap may or may not be on your original rollers) See pictures for: Install Instructions and sizingstamped on nylon wheels: 625 H.J.  *Note to customer* there are a wide verity of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Please send a picture of the part you are looking for to Email: Info@WindowPartsCetner.com Text Line: 303-222-4489 PSR 97

    62 in stock

    $ 12.00 - $ 16.00

  • 521 Sliding Screen Door Handle.

    521 Sliding Screen Door Handle.

    Out of stock

    Part # 521 - Sliding Screen Door Handle.Replacement Part for Hurd Sliding Patio Door Screens

    Out of stock

    $ 20.50

  • Binding Post Screws

    546 Binding Post Screws

    34 in stock

    Click on picture to enlarge. Standard Binding Post Screw - Silver Mill Finish -$16.00 each. Fits in a 1/4" diameter whole. No other finishes available.UPGRADE Binding Post Screw - Chrome, Brass Dull Finish, Dark Bronze & 18-8 Stainless Steel $26 each. 1/4" Diameter. ***NOTE*** When using the Upgrade # 546U Binding post. The diameter is 1/4" so you will have to drill out the hole with a 5/16" drill bit for these binding post to fit.

    34 in stock

    $ 8.00 - $ 28.00

  • 522Shim -C Elite Offset Lock Handle Replacement Shim 17/32 Inch Thick Sliding Door

    522SHIM -C Elite Offset Lock Handle Replacement Shim 1/8 Inch Thick

    8 in stock

    Part Number: 522SHIM Replacement Shim Color: White  Dimensions: 8 1/2 Inch Long x 15/16 Inch Wide x 17/32 Inch Thick This shim will only work on our part number 522 C Elite Offset Lock Patio Door Handle  Shim is used on handle for door panels that are thinner so handle set can be tight to door and not  be loose or wobble. Example this shim is needed for Hurd Sliding patio door panel.  Shim comes included when you order Part Number 522KIT for Hurd doors

    8 in stock

    $ 10.00

Login

Forgot your password?

Don't have an account yet?
Create account