Part Number: 515
Head or Side Screen Track Channel For Sliding Patio Doors
Color:
White, Sand, Bronze and is made of Vinyl- limited stock if you can add it to cart it is available. Once stock is gone it will no longer be available.
Aluminum is a mill finish and made of Aluminum (silver in color will be the replacement option once all the vinyl track is no longer available)
No returns on samples
once we run out of stock this item will no longer be available in the vinyl white, bronze and sand option. the Aluminum will the the only replacement Option
Measurements: 3/4 Inch Wide x 11/16 Inch Deep x Length Selected
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
Know Part Number: HSPD43
Known to be Used On: Hurd Brand Sliding Patio Doors
Frost Barrier (for fiberglass sill seal) Used On Hurd Energy Saver Sliding & French Sliding Aluminum Clad Patio Doors. -Also called a Black Fiberglass Sill SealPlease note that on currently produced doors, this Frost Barrier is only placed in front of the operating panel (not in front of the fixed panel).For 5-0 Call out Wide - use 29" Frost BarrierFor 6-0 Call out Wide - use 35" Frost BarrierFor 8-0 Call out Wide - use 47" Frost BarrierFor 12-0 Call out Wide - Use 70" Fort BarrierFor 16-0 Call out wide - use 94.5" Frost Barrier - please e-mail info@windowpartscenter.com for custom invoice. A $150 adder has to be added due to UPS and fed ex 8’ or longer shipping adder.
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
Color: Black OnlyKnown Part Number: 037330
Part Number: 692 - Truth Folding Nailing Fin Sill - Set of 4
Sold in: 4 pack of 6' lengths. For runs longer than 6' the nail fin can be pieced together in the frame.
Size:
6 foot piece (sold in packs of 4)
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
nail fin has a hinged flexible Kurf so it can lay flat and then bend at 90 degrees when installing. Manufacturers like Hurd used this nail fin on the bottom of their windows for ease of shipping as it lays flat. But can be used on all 4 sides of the window for reinstallation.
Known to have been used along the bottom of Hurd Horizontal Sliding Windows and Casement windows
Part Number: 529
Sold Individually
Measurement: 1 7/8" W x 1 1/8" H
Known To Be Used On: Rite Screens, Hurd Current Screen Rollers 2006 to Present, Sierra Pacific WI Sliding patio Door screen. PVS4, SCPR47801
Associated Parts Sold Separately:
529SCREW - Screw Pack 1 Install Screw 1 Adjustment Screw
Part Number 964 - Nailing Fin Corner Pad
window installation supplies
For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)
Sold In: Set Of 4 as shown in picture
Color: Black
Stick On
Part Number: 533
Manufacture: Amesbury Truth
Known to have been used on: For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts
Old Style Stamped on part: 2153
Works as a replacement option for W&F keeper that has been discontinued
963 - Offset Nailing Fin For Sliding Patio Door
Color: White or gray Sold in: 4 pack of 6 foot pieces.
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples.
For runs longer than 6' the nail fin can be pieced together in the frame.
this nail fin is a for a sliding patio door it gives you a 1/2 inch offset. as sliding doors like Hurd and Sierra pacific have a wider frame jamb. Nail fin pushes the nosing out so the door frame stays flat on the inside of the wall.
Known to be used on sides and head of Hurd and Sierra Pacific Sliding Patio Doors.
P/N 692 used along bottom sill.
For Classic Sliding Patio Doors Wood Head Parting StopPart Number 526
Material: wood
Length: 91 1/4 inch long
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
Item #19 in the Exploded View
Parts Sold Separately#511 (Side and Head Seal Weather Strip snaps onto part number 526)
Part Number 554
Sliding Patio Door Handle Set - comes with matching color tail lock latch - wooden latch is old style no longer available
Hole Center 3-15/16” CTC
.812 Tail
Non keyed or keyed (keyed only available for black and white option)
Black Or White Finish (Almond and Chestnut bronze are special order item no return)
Wooden Handle
***Does NOT include a Mortise Box***
