Hurd Windows & Doors Replacement Parts and Hardware

830 - Replacement Schlage Keyed Cylinder Keyed Cylinder - Random KeyedYou can Select Keyed Alike if you are ordering QTY 2 or more cylinders and you want them to be keyed the same. Add's $15 per cylinder. This may add 1-2 week lead time before order is shipped out.Over all length: 3 1/4”Shaft Length: 1 7/16" - customer can cut down shaftCylinder Length: 1 1/4"Face Width 9/16" Wide Pro Tip: If after you tighten the handle and the dead bolt won’t lock or unlock or really hard to turn the tail part is too long and needs to be snipped down. See directions in pictures above. Grooves are on tail part to be snipped down so it can be used on multiple thicknesses of doors. 

Read more less

 #833 - Hoppe 3Pt Convertible Under plate - Bright Brass     Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors     Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #834 - Hoppe 3Pt Striker For Rollers - Auto      

Read more less

#834 - Hoppe 3Pt Striker For Rollers - Auto - Bright Brass Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #833 - Hoppe 3Pt Convertible Under plate    

Read more less

Part Number: 835 4" x 4" Ashland Horizontal Guide Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" ADJUSTABLE HORIZONTAL DOOR HINGES Handing: Non Handed remove the pin and flip to reverse handing see video below. For the Mate Vertical Hinge see part number 836   Low Stocked Item - May have a 2-3 week lead time KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated product Sold Separately: Part Number 836 Set Hinge Screw Pack 835/836Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Hinge Pin Video:

Read more less

Part Number: 836  4" x 4" Ashland Vertical  Set Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" VERTICAL ADJUSTABLE DOOR HINGES For Mate Horizontal Hinge See Part Number 835  Low Stocked Item - May have a 2-3 week lead time Handing: Non Handed - see video below. Remove pin and flip to reverse handing KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated Product Sold Separately:  Part Number 835 Guide Hinge Part Number 835/836 Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Pin

Read more less

Part Number 837 Adjustable Oak Threshold For Hurd Clad & Wood In swing Patio Doors. Built 1988 thru 1994Thresholds will not fit tight end to end as there needs to be a small gap on both sides for water weep purposes. - Old weep system threshold.Size:2-6 Size = Threshold is 27 7/8 Inch Long2-8 Size = Threshold is 29 7/8 Inch Long3-0 Size = Threshold is 33 7/8 Inch Long INSTRUCTIONS FOR P#837 To remove old threshold: Use a #3 Philips bit on your drill - to unscrew the screws on the top of the old oak threshold all the way. Once screws are completely removed the old threshold will pull up. There are T nuts in a T track underneath the threshold that the screws screw into. You can reuse the old T nuts or replace the T nuts in the T track with the new T nuts provided with the new threshold To replace the T nuts – you will remove the old T nuts by sliding them out of the track – there should be a space at one of the ends of the track for you to do this. Take new T nuts and slide them into the track through the same space at one of the ends of the T track. Replace with new threshold by aligning the T nuts to the screws in the threshold. Screw in all screws into the T nuts below – be careful not to over tighten – and the screws are used to adjust the threshold as well. Adjusting the Threshold: Once the threshold is installed and all screws are screwed into the T nuts - the threshold can be adjusted by tightening or loosening the screws. Tightening screws to lower the threshold or loosening the screws to it rise up. Known Part Number: 203516, 203515, 203514, HHPD43

Read more less

Part Number 838 Weatherstrip used on Hurd Classic In swing patio Door with Fiberglass Sill built Prior to 2010Length: 6 foot Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples Color Bronze Limited quantities available as this product is no longer manufactured 

Read more less

Part Number: 840 Current Style Active  Amesbury Truth Sentry® .63 and Sentry® .03 Used For GU Multi Point Hardware ACTIVE HANDLE SET* (Hurd and Sierra pacific) Active handle sets come keyed with thumb turn and are for single door or the primary active door panel on a French door. 10 Inch Escutcheon NOTE TO CUSTOMER: As of March 20 2017 the OLD STYLE 8.9375 long Escutcheon was discontinued by the manufacture (mounting screw hole where 7 5/8" center to center. The new style has 10" long Escutcheon (Mounting screw holes are 8.5" center to center). Note this height change does alter the placement of our mounting holes. Bottom mounting screw hole will be reused, but the customer will have to drill one new top mounting screw hole. The old mounting screw hole will be covered by the escutcheon.  All handle sets will be shipped with the new 10 inch taller escutcheon plates. Please note a new mounting hole will be necessary. Field instructions (see pictures for drawings with dimensions).  Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time. Finish Options for Different Styles:  (All styles are not available in every finish color) Classic Escutcheon with Traditional Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Champagne Oil Rubbed Bronze FB**  Polished Chrome Satin Nickel White Classic Escutcheon with Loft Handle  Antique Brass Brushed Chrome Oil Rubbed Bronze FB (forever bronze not true oil rubbed bronze that will change) Polished Chrome Satin Nickel White  Contemporary Escutcheon with Loft Handle Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Squared Contemporary Escutcheon with Contemporary Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.Used on Hurd Inswing and outswing patio doors all wood and wood clad 2006 - Present - Direct Replacement For 2005 models as well *For Semi Active handle set see part number 841 Has thumb turn no keyed lock- To be used on a secondary door panel on a French door  that has shoot bolts that are operated and locked into place by the handle set. *For dummy handle see part number 842 no operation no thumb turn - To be used on a secondary door panel on a French door that is fixed in place with no operation or has manual shoot bolts that are not operated by the handle set. **FB = forever bronze so it will not change color over time like a true oil rubbed bronze would.

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 840-001- Amesbury Truth GU Faceplate Small Hole - Swinging Patio Door Hurd Discontinued Product. What we have in stock is all that is available. No returns all sales final. 

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 840-002 Armsbury Truth swinging Patio Door Active Face Plates Handel set Replacement Parts Discontinued Product. What We have in stock is all that is available  Active Face plate Only No returns all sales final Sold as is used on: Amesbury Truth Handle Set, Hurd Swinging Patio Door, GU hardware 

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 840-003 Small Hole Armsbury Truth swinging Patio Door  Face Plates Handel set Replacement Parts Discontinued Product. What We have in stock is all that is available  Active Face plate Only No returns, all sales final, Sold as is used on: Amesbury Truth Handle Set, Hurd Swinging Patio Door, GU hardware 

Read more less