Amesbury Truth

205 products


  • C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock with Flat face plate   (PAT#: 6,264,252  - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE

    Amesbury Truth C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock

    19 in stock

    Part Number C1059 C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock with Flat Trim Plate  (PAT#: 6,264,252  - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Faceplate  - 2 Point - For Sliding Patio Door

    19 in stock

    $ 35.00 - $ 45.00

  • 105 Amesbury Truth Operator 15 Series Traditional Case Long Arm 13 1/2 Casement Window Parts

    Amesbury Truth 105 Amesbury Truth Operator 15 Series Traditional Case Long Arm 13 1/2 Inch Ellipse Case 60 Series

    42 in stock

    Part Number: 105   Amesbury Truth 15 Series "Traditional Square Case 13 1/2"" has been replaced by the Ellipse Case 60 Series (13 1/2"). They are a Direct Replacement, only difference is the case design. See pictures for more details.  13 1/2 Inch Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.  Known Part Number: 15.32, 105, 45251, 45136, U.S. PAT. 4505601, PAT. CANADA 1986, U.K. PAT. 2135397, 7707, 15-32-32-062, 15-32-32-061, HCSE43 Known Replacement Parts for: Hurd, Caradco, BiltBest, Oldach, Allsco, Semco (1976-1986) and more Associated Parts Sold Separately:  139 Handle Roto Crank - 3 1/2" with 11/32" Spline Operators with Similar Housing But Different Arms and Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator  

    42 in stock

    $ 0.00 - $ 52.00

  • Amesbury Truth Window Lock

    Amesbury Truth 129 Amesbury Truth Mirage Lever Lock & Escutcheon Kit

    156 in stock

     Part Number 129 MIRAGE® CONCEALED MULTI-POINT LOCKING SYSTEM Casement and Awning Amesbury Truth Mirage Lever Lock & Escutcheon Kit Each Kit Comes With: 1  lever Lock and 1 escutcheon  The true beauty is what you can't see. Mirage's Concealed Locks for wood windows are so thin; they're barely noticeable. All locking points are concealed to create a clean look for your window system. The handle and escutcheon are removable for painting or staining wood trim. The tie bar guides are pre-located for quick and easy installation. Mirage's Multi-Point Locking System has an exceptional .625" pull-in and can withstand 245 lbs. of force per locking point. In Stock Colors: Champagne, White, New Goldtone, Bronze, Black All other colors are special order item. No returns or exchanges. Associated parts Sold Separately:  Bug Guards can also be purchased separately P/N 128 pack of 4 BACKPLATE LINK ASSEMBLY (11645.92) 198 Tie Bar Multi Point Window Locking Mechanism (in jamb version) Brand: Amesbury Truth Mirage, Energy Saver Vintage Hurd Casement and Awning, Sierra Pacific, H3 and many other window brands, Energy Saver Vintage Hurd Casement and Awning Kit Includes: Lock Handle, Escutcheon and 2 Bug Guards Known Part Numbers: 45265, 45376, 10-13 Sash Lock (B1), HCSE66, D4-2091, D4-2092, D4-2090

    156 in stock

    $ 25.00 - $ 140.00

  • Hollow Gray Bulb Weather Strip For Windows  Amesbury Truth Kerf Mounted Hollow Window Weather Strip / Gasket  Part Number PPI 1727, 015512  Hurd Windows

    Weather Stripping 901 Gray Bulb Weather-Strip

    3920 in stock

    Part Number: 901 Amesbury Truth Kerf Mounted Hollow Window Weather Strip / Gasket Special Features: TPE bulb Weather Seal. Designed for 0.078" kerf. Other Information: Hollow TPE Bulb Seals Color: Gray Sold by the foot Rolled: Larger QTY's maybe shipped in multiple rolls. Example if you order 300 feet you may receive QTY 6 - 50 foot rolls. Some rolls maybe in increments of 25 feet. (full spool comes in 1000 feet only)  no returns of rolls of less than 25 feet Returns will only be accepted for full uncut rolls in increments of 25, 50 and 100 feet. No returns on 1000 foot spools Known Part Number: 1727, 015512, HCSE454 Known Brands: Hurd Windows, AmesburyTruth, and many other window brands. Maintenance: Weather Strip Seals are an maintenance item. You should replace your weather strip periodically once it’s worn out so windows seal properly. Lifespan of weatherstripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window.

    3920 in stock

    $ 5.00

  • S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock. Color Bronze. Known to have been used on: Crestline, Vetter and Peachtree Windows. Known part number stamped on back: 45428 Truth, Replacement version for locks stamped with 21328A

    Amesbury Truth S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock

    27 in stock

    Part Number: S1107 Amesbury Truth 16 Series HomeGard Casement Window Sash Lock Color: White New Goldtone and Bronze  (Beige is also available for special order please email for quote) What's Included: Each lock is Sold complete with: 1 lock, 1 Left Keeper, 1 Right keeper and color matching mounting screws for lock an keeper. (so you can use on either left hand or right hand operating casement windows) Dimensions: 2 1/4 Inch Wide x 2 3/4" Tall x  3/8 Inch deep at 1st step and 15/16 inch deep and 2nd step Screw Hole Spacing: 2 5/16 Inch Center to Center  HomeGard Sash Locks are a perfect low-profile lock option for windows with smaller side stops. Featuring .625" pull-in, HomeGard locks offer a strong detent which consistently provides a more secure feel during lock up. HomeGard locks can withstand negative air pressure of 275 lbs. per lock. Known to have been used on: Crestline, Vetter and Peachtree Windows, Semco  Known part number stamped on back: 45428 Truth, Truth w/ House Symbol Replacement version for locks stamped with 21328A, Retro fit replacement option for lock with stamp on back of 31664  

    27 in stock

    $ 28.00

  • S1015 - Truth SafeGard 2R Window Operating Control Device (WOCD) For Casement Windows part number Model: 39-1177RH-kit,  Safegard™ 2 Window Opening Control Device

    Amesbury Truth S1015 -Amesbury Truth Residential SafeGard 2R Window Operating Control Device (WOCD) For Casement Windows

    78 in stock

    Part Number: S1015 Residential SafeGard 2R - Current Style Amesbury Truth Residential SafeGard™ 2R  Operating Control Device (WOCD) For Casement Windows The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. .  This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B") ****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)**** Style:  We recommend to check with your window manufacture which style to purchase for your window. R2 Standard -Track (with black clip and red button):  8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep (For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was:  6 3/8" Long x 3/4" Wide X 1/4" Deep C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote.  Safeguard 2R Installation Instructions PDF  Ordering Instructions for SafeGard 2R: Residential Applications  1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required. 2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member 2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review. Includes: Arm Assembly, Track  Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application). Product Highlights Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements Avoids interference with operation or performance of a window Features and Benefits beyond ASTM F2090-21 Fully concealed unit after installation and window in closed position Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C) Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag All adjustments can be done inside the home after window is installed Pan head screw (SS) use for ease of handling Concealed arm after released from track Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge WOCD will automatically re-latch when window is fully closed Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application Safegard 2R Residential Application Info:   As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel.  PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device  ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement   The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal).   Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows Window Type Casement Window Material: Wood Composite  Vinyl Recommended Mounting Screws #8 Pan Head, length and screw type dependent on application Current Safegard 2 Video Below Old Style No Longer With Red Clip Video Below- this style is no longer available replacement  is the S1015

    78 in stock

    $ 95.00

  • Known Part Numbers On Hurd W&F Handle : P/N 120-50, PAT. # 5,092,114

    Amesbury Truth 516 - W&F Upgrade Handle Handle Set Brass and Wood Handle - See Description to Order Replacement Option

    Out of stock

    516 - W&F Upgrade Handle (Brass and Wood) Is No Longer Available. Use replacement options below. How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order! Verify you have the "A" screw hole position on your W&F mounting plate (see picture)  Please watch videos below! Pictures and video show a Hurd Classic Sliding Patio Doors that Used W&F Brass and Wood handle Set.  If you find you have the "B" Screw Hole Click Here Parts to order: 1. Handle set: Part Number 522 Handle Set offset latch for "A" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for faction explanation.  2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the 522 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following # 518 Gray cylinder 45 degree (Hurd Brand Doors and others) # S3007 45 Degree (other brand doors) #S3011 45 Degree (other brand doors) If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts. 3. Binding Post Screw - as shown in the how to video the 522 handle set is not as long as the old W&F handle set you are replacing.  You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw. Part# 546 - your choice of finish 4. White Shim - as shown in how to video you door thickness may require a shim. Shim is known to be needed on Hurd Doors Part Number: 522SHIM Additional Info: 522 Handle Set Function Explanation: Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts) Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!  Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version.  See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws. Known Part Numbers On  W&F Handle : P/N 120-50, PAT. # 5,092,114  Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144 If your mounting plate and handle uses the "B" Screw Holes See Part Number S3006 Replacement Kit

    Out of stock

    $ 0.00

  • 115 Operator Short Arm 9 1/2 Casement Window Parts. Amesbury Truth Single Arm 50 Series  Operator Short Arm 9 1/2"  Known Part Number: 15-31-32-051, 15-31-32-052

    Amesbury Truth 115 Amesbury Truth Single Arm 50 Series and 60 Series Operator Short Arm 9 1/2"

    8 in stock

    Part Number 115 50 Series with traditional housing has been discontinued. Direct Replacement is the 60 Series with Ellipse Operator Short Arm 9 1/2" Measurement is taken from center of housing to center of nylon roller - see drawing to measure accurately on your operator.  Amesbury Truth Single Arm 50 Series  Operator Short Arm 9 1/2" Color in picture: Goldtone To determine what handing to order: Look at picture of part and match up your operator to our picture to determine if you need to order a Left or Right handing. Click on picture to enlarge to see handing, color and dimension of operators PLEASE NOTE: Operators Old Square Style has been discontinued by manufacturer - once our stock is depleted we will automatically send the New Style which is the direct replacement. New Style Operator face is rounded rather than square. Known Part Number: 45251, 7707    Replacement Parts for: Hurd, Marvin, Cascade, Caradco, BiltBest, Semco, Oldach Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit Part Number 111 - Truth/Wright Split Arm Dyad Operator  Known Part Number: 15-31-32-051, 15-31-32-052

    8 in stock

    $ 52.00 - $ 62.00

  • Casement Track Shoe - 189 - Black Plastic

    Amesbury Truth 189 Track Shoe For Casement Windows

    124 in stock

    Part Number 189 Track Shoe For Casement Windows - Comes in Black Only - Also called casement slider for operator  Dimension: 11/16" Black Casement Slider Amesbury Truth Replacement Part that attaches to Truth Operators:  Related Products Sold Separately:  Part # 101 - Amesbury Truth Maxim DLX Sill Mount Casement Dual Arm Operator Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it

    124 in stock

    $ 8.00

  • shim for hinge track

    Hurd 183 Shim For Hinge Track

    237 in stock

    Part Number 183  Shim For Hinge Track Shim for casement and awning windows. This goes under the Non-Adjustable hinge track for easy home window repair.

    237 in stock

    $ 8.00

  • Truth Maxim Mechanism Split Arm Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific, Allsco and more. Known Part Number: 102, 45352, Truth, 50-50-32-011, 50-50-24-011, 50-50-32-012, 50-50-24-012

    Amesbury Truth 102 Amesbury Truth Maxim DLX Casement Operator Split Arm / Dyad

    Out of stock

    Part Number: 102 Amesbury Truth Maxim Casement DLX Split Arm / Dyad Operator 102 maxim series has been discontinued. Once stock is depleted the direct replacement will be 147 Encore Series. When you order 147 Encore  - You will need to purchase the cover and handle kit part number 137 sold separately. The Maxim Series Dyad Operator is designed for narrow windows, but will operate a frame width from 16” to 32”; height up to 72” and a sash weight of up to 55 lbs. Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific, Allsco and more. Known Part Number: 102, 45352, Truth, 50-50-32-011, 50-50-24-011, 50-50-32-012, 50-50-24-012 To Order Direct Replacement Encore Style 147:  Part Number 147 Encore Dyad Operator Part Number: 137 Encore Folding Handle and Cover Kit Instructions on How To Replace Operator Click On Blog Link Associated Parts Sold Separately for Part Number 102 Maxim DLX Style  P# 131 (Folding Handle)  P# 177 (Non Folding Handle).   If you are not sure you can e-mail us a picture of your existing operator. Please read our Parts Identification Instruction page and then e-mail your pictures to: info@windowpartscenter.com

    Out of stock

    $ 51.00

  • Amesbury Truth .300 Hollow Bulb Window Seal Gray Window Weatherstrip with Hollow Off-White Foam Filled. Part Number 918, 039053, 12138112291250, 12138

    AmesburyTruth 918/713 Amesbury Truth Kerf Mounted Gray Hollow Bulb Foam Filled Window Weather Strip Seals

    3925 in stock

    Part # 918/713 AmesburyTruth  Weatherstrip with Hollow Off-White Foam Filled - .300 Window Seal Color: Gray, White, Bronze, Sand. Sold by the foot Rolled: Larger QTY's maybe shipped in multiple rolls. Example if you order 300 feet you may receive QTY 6 - 50 foot rolls. Some rolls maybe in increments of 25 feet. (for full spool order 1250 feet)  no returns of rolls of less than 25 feet Returns will only be accepted for full uncut rolls in increments of 25, 50 and 100 feet. For full spool order: 1250 Foot Spools - no returns on spools** **1250 Foot Spool can have a lead time if not in stock no order cancelations  Bulk Pricing Calculated Once Added To Cart: QTY 25 - 49 Feet 45% QTY 50-99 Feet 55% QTY 100-499 Feet 65% QTY 500-999 Feet 75% QTY 1000+ Feet 80% Manufacture Detail: Compression seals are almost 100% closed cell to prevent water from getting into the foam cell structure. The exterior skin provides UV resistant barrier with design features that enhance the weather strip's sealing performance. Designed to fit .089" / .250 kerf slot Window Weather Strip Seals are an maintenance item. You should replace your weather strip every 10-15 years depending on your climate and weather conditions of the area you live in so windows seal properly. Known Brands: AmesburyTruth, Hurd Windows, Sierra Pacific Windows, H3 Windows and many other window brands. Known Part Numbers: 918, 039053, 12138112291250, 12138 Maintenance: Weather Strip Seals are an maintenance item. You should replace your weather strip periodically once it’s worn out so windows seal properly. Lifespan of weatherstripping depends on your climate, weather conditions of the area you live in, and other wear and tear factors that is put on the window.  

    3925 in stock

    $ 8.00

Amesbury Truth

Login

Forgot your password?

Don't have an account yet?
Create account