Double Hung and Single Hung Window Parts

126 products


  • 337 Block & Tackle for Easy Tilt Jamb Liners - IBS Amesbury Truth

    337 Block & Tackle for Easy Tilt Jamb Liners - IBS Amesbury Truth

    Out of stock

    Part Number 337Due to the amount of sizes available we do not stock block & Tackle. estimated Lead time is usually 4-6 weeks. Special order item NO return no order cancellation. Sold Individually Non handed Block & Tackle for Single Hung and Double Hung Easy Tilt Jamb Liners - IBS SIZE: To know what size to order you will need to identify by the code stamped on metal bar. (pictures shown above are and example of what the code looks like (click on picture to enlarge or watch our video below). The number refers to the length and the letter refers to the spring strength. Due to the amount of sizes available we do not stock block & Tackle. Lead time is 4-6 weeks. Special order item NO return.

    Out of stock

    $ 27.00 - $ 37.00

  • 338 Block and Tackle Locking Shoe

    338 Block and Tackle Locking Shoe

    21 in stock

    Part Number: 338 Block and Tackle Locking Shoe sold individually Patent 4,610,108

    21 in stock

    $ 8.00

  • 340 - Jamb Liner Spring End Clip Metal Pack Of 4 Current Style Balance

    340 - Jamb Liner Spring End Clip Metal - Current Style

    86 in stock

    Part # 340 Current Style  Replacement Balance Spring End Clips For Double Hung and Single Hung Window Compression Tilt Jamb Liner Springs.Known To Have Been Used On: Hurd, Weather Sheild, BiltBest, Cradco, Oldac and more. To order Springs (Sold Separately)  See part Number 335

    86 in stock

    $ 6.00

  • Metal spring end clip for double hung window jamb liners. part number 340

    340 - Jamb Liner Spring End Clip Metal - Old Style

    107 in stock

    Part # 340- Old Style Replacement Balance Spring End Clips For Double Hung and Single Hung Window Compression Tilt Jamb Liner Springs.Known To Have Been Used On: Hurd, Weather Sheild, BiltBest, Cradco, Oldac and more. To order Springs (Sold Separately)  See part Number 335 Once 340 old style is out of stock no more will be available the replacement will be 340 new style click here 

    107 in stock

    $ 6.00

  • Last stock! 341 Hurd Monument Custodial Sash Take Out Clip & Fasteners Kit - Single and Double Hung Windows

    341 Hurd Monument Custodial Sash Take Out Clip & Fasteners Kit - Single and Double Hung Windows

    5 in stock

    Part Number: 341 Hurd Monument Custodial Sash Take Out Clip & Fasteners Kit - Single and Double Hung Windows  This custodial sash take out kit includes a clip and fasteners for single and double hung windows. Easily remove balances with balance removal instructions and view pictures for step-by-step usage. Simplify custodial and service tasks with this efficient kit. Each kit comes with: 2 Sash Take out clips 2 Pan Zinc Machine Screw 2 brass threaded inserts (#6 x 5/8" PH Pam SMS screw shown in directions NOT included in kit) Remove and clean your windows with ease using the 341 Hurd Monument Custodial Sash Take Out Clip & Fasteners Kit. This kit works for both single and double hung  Hurd Monument Wood/Clad windows, Requiring only one sash clip screw and insert for each side of the window jamb. Keep your windows looking spotless with this convenient and efficient kit.

    5 in stock

    $ 25.00

  • 344 - 156 Series Block and Tackle Balance for Single Hung and Double Hung Windows

    344 - 156 Series Block and Tackle Balance for Single Hung and Double Hung Windows

    Out of stock

    Part Number: 344 Sold Individually - These are not a stock item. They are made to order. Special order item no returns 156 Series Block and Tackle Balance for Single Hung and Double Hung Windows  Expertly designed for Hurd Monument Wood and Wood/Clad windows as well as many other window brands The 344 - 156 Series Block and Tackle Balance is designed for both single and double hung windows. Refer to the sizing chart in the pictures and locate the balance number stamped on the length your sliver balance rod for accurate sizing.  The 344-156 Series Block and Tackle Balance ensures smooth and effortless operation of your single or double hung windows. With multiple size options available, this balance has been widely used and is compatible with other window brands. For easy balance and sash removal, pair with part number 341 (sold separately) and follow the shown instructions on the 341 product page.

    Out of stock

    $ 27.53 - $ 94.74

  • 345 - WOCD Standard Angel Ventlock Retrofit Window Opening Control Device Double Hung 1/8 to 5/32in Sash to Sash Stamped on Back for part: Mighton PCT/GB09/1526 24/06/30

    345 - WOCD Standard Angel Ventlock Retrofit Window Opening Control Device Double Hung 1/8 to 5/32in Sash to Sash

    7 in stock

    Part Number: 345 NOTE: Before you place your order review all information  below and review all drawings and compare to your windows. WOCD Standard Angel Ventlock Retrofit Window Opening Control Device Double Hung Windows This Standard Retro Angel Ventlock is another ideal limit control devise for use in aftermarket applications. This Window Opening Control Device (WOCD) is mounted to the top sash on a double hung wood window. The Standard Retrofit Angel Ventlock version fits into the style of the top sash and must be mounted to restrict the bottom sash open to less than four inches. These units are single action, so installing one on either side of the sash ensures compliance with the code ASTM F2090 - 2008 and 2010 Various Sizes and Finishes are Available. To determine what size you need by measuring the window gap between the top sash and bottom sash. Simply measure the distance between the two.  Colors: Blue White, Oil Rubbed Bronze (faux) and White Stocked Size WOCD # 345 is for a Window Gap of: 1/8 inch to 5/32 Inch Sash to Sash (see drawing A Dimension) For other gab sizes options see picture of chart and email us for a quote at Info@WindowPartsCenter.com Each Kit Includes:   Left Opening Control Device. Right Opening Control Device. 6x 5/8’ Wood Screws. install Instructions WOCD Complies with: ASTM F2090-17* (see instructions note WOCD was tested to and complies with the requirements of ASTM F2090, Versions 2008, 2010, 2013 and 2017) Which Angel WOCD Do I Need?: Angel WOCD devices only work with windows where the sash to Frame gap is fixed and cannot vary (the "A" dimension" see drawing) . If you are unable to determine the "A" Dimension of your window or  if this WOCD will work on your hung window or if it meets your local building code contact the window manufacture and your local building department for assistance on what WOCD you need for your window application. If unsure only order 1 kit to check fit before ordering more. Returns: Only accepted for stock style size A Gap measurement of 1/8 inch to 5/32 inch. #345 must be in unused new WOCD See about us > Refund Policy for full return terms and conditions. No returns accepted for Bulk orders of QTY 25 of more or of the special order sizing no matter the QTY.   Stamped on Back for part: Mighton PCT/GB09/1526 24/06/30 For More Information on Angle Ventlocks Visit Manufactures Website: https://www.angel-ventlock.com/

    7 in stock

    $ 70.00 - $ 110.00

  • 346 Angel Ventlock Face Fixed Single Action WOCD - Window Operating Control Devise

    346 Angel Ventlock Face Fixed Single Action WOCD - Window Operating Control Devise

    34 in stock

    Part Number: 346 NOTE: Before you place your order review all information  below and review all drawings and compare to your windows. Angel Ventlock Face Fixed Single Action WOCD Window Operating Control Device  The Face Fix version is fitted into the stiles of the top sash - one on either side.  Styles: Sold as the following:  Kit Includes: 2 Lock Devises, 4 screws and 2 bumpers Replacement Lock Only Includes: 1 Lock Colors: White, Oil Rubbed Bronze, Satin Chrome, Chrome, Bright Brass (email for quote), Bronze, Satin Nickel, Black (not all colors are available in kit or lock only styles.)  The units are single action, so fitting two ensures compliance with ASTM F2090 2008 and 2010 The Unit is primary factory fitted as access to the sash is available prior to installation in the window frame. However, provided the sashes can be removed easily the Face Fixed version is also suitable for use where the sashes have already been installed two screws are used to fix each unit in place. Fixing is though h the front of the unit and into the sash. The face fix version is for use on Timer, Vinyl, Aluminum and fiberglass Sashes. If not factory installed into the sash you will have to mortise out the pocket in the sash for the WOCD to insert into. You will be responsible for determining if your sash can accept the WOCD. If unsure only order QTY 1 before ordering more. Returns: Only accepted for stock style size A Gap measurement of 1/8 inch to 5/32 inch. #346 must be in unused new WOCD See about us > Refund Policy for full return terms and conditions. No returns accepted for Bulk orders of QTY 25 of more or of the special order colors no matter the QTY.   Stamped on side of lock: VSP Patented For More Information on Angle Ventlocks Visit Manufactures Website: https://www.angel-ventlock.com/

    34 in stock

    $ 0.00 - $ 69.00

  • Window Lock

    401 Checkrail Window Lock With Keeper

    118 in stock

    Part Number 401  Amesbury Truth Entrygard II Check Rail Sweep Sash Lock and Keeper Set Check Rail Lock and Keeper Set  for Single or Double Hung Windows and Horizontal Slider Windows  What included: 1 Lock, 1 Keeper and 4 Color Matching ScrewsColors Available: Bronze Discontinued Colors: Dark Bronze, Bright Brass, white, goldtone and New Goldtone (once our stock is gone they are discontinued colors and no longer available)  Known Part Numbers For Lock: 11869395 - Bronze, 11869396, 1719BR - White, 45226, 45192, 40381, 1719W. U.S. Pat. 268,643, 310 CAN. PAT. 49255 Known Part Number for Keeper: 9415 Brands: Hurd Windows, Marvin Windows, Entrygard, Amesbury Truth

    118 in stock

    $ 21.00 - $ 39.00

  • 703 - Replacement H3 Screen Plunger & Cap Kit -Discounted- see description for replacement option

    703 - Replacement H3 Screen Plunger & Cap Kit -Discounted- see description for replacement option

    Out of stock

    part number: 703 - Discontinued - Replacement is S703 Screen Plunger & Cap for H3 Hurd And Sierra Pacific To Order Replacement See Part Number S703H3 Clear Cap Version Discontinued in 2021

    Out of stock

    $ 0.00

  • H3 DH Sweep Lock & Keeper Kit

    707 - H3 DH Sweep Lock & Keeper Kit

    7 in stock

    Kit Includes: 1 Lock, 1 Keeper, 4 screws  Locks are Handed.If you window only has 1 lock then it is a Left Hand.If window has 2 locks then it has a Left Hand and a Right Hand***Left Hand and Right Hand Locks are sold separately - See picture for handing Goldtone has been discontinued by manufacturer. Once stock is depleted Champagne will be shipped out in its place. Number that can be stamped on the back of the lock: 32782Numbers that can be stamped on the back of the keeper: 677147  

    7 in stock

    $ 27.00

  • 708 - H3  (Concealed Jamb Liner) DH Tilt Pivot Pin

    708 - H3 (Concealed Jamb Liner) DH Tilt Pivot Pin

    107 in stock

    Part number: 708Tilt Pivot Pin sold individually (Use #7 x 5/8" Screws - Not included) Replacement Pivot Pin for H3 Double Hung Windows

    107 in stock

    $ 8.60

Double Hung and Single Hung Window Parts

Login

Forgot your password?

Don't have an account yet?
Create account