As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is Only available as a kit now see part # 544
501-095706 - Amesbury Truth Dummy Sliding Patio Door Handle Set
Dummy Handle Set
Discontinued Product- What we have in stock is all that is available. No returns all sales final.
Amesbury Truth Handle Set, Hurd Sliding Patio Door
40.81.51.100 - Truth Hardware
This handle set is a Discounted Old Style No longer Manufactured
Related Product:
Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit
Part Number: 505
Door Bottom Channel Weather Strip For Sliding Patio Door
Size Length:
5-0 Door = 29 1/4 Inch Channel
5-4 Door = 31 1/4 Inch Channel
6-0 Door = 35 1/4 Inch Channel
8-0 Door = 47 1/4 Inch Channel
Color: White
Material: Vinyl Plastic
Vinyl Dimensions: 3/4" Wide and flanges out to 13/16" Wide X 1/2" Deep x Length (see size options above)
Description: U Channel Weather-strip for CHES/HES Hurd Sliding Patio Door. The metal channel is for older Hurd “Classic” doors and the plastic one is for “Energy Saver” doors. If you have the old metal we recommend you purchase the longest length(8-0) and retro fit like our how to video shows below.Metal Style NLA will have to retro fit by using the plastic part - the fuzzy weather strip will be installed toward the exterior on the door panel. Please watch how to video below.The Metal Dimensions (NLA): 5/8" wide at metal top and ¾” wide at fuzzy weather strip side x ½” deep x length depending on door sizeThe Plastic Vinyl Dimensions: 3/4" Wide X 1/2" Deep x length (see size options above)***505 part can only be retuned if its in new, unused uncut condition***
Associated Pars Sold Separately:
Part Number 526 Parting Stop - wood part that 511 snaps into
Part Number 513 Vinyl Side Stop weather strip Used along with 511
Part Number 527 Wood Side Stop that 513 snaps into
Part Number 511 Weather Strip
Part Number 520 Rollers
Known to have been used on: Hurd, Sierra pacific, Park Vue, Weather shield and many other patio door brands.
***505 part can only be retuned if its in new, unused uncut condition***
known past numbers:
SSPD467
Part Number 511
Side or Head Seal Weather Strip for sliding patio doors
Size: 94 5/8 Inch long
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
This usually ships via UPS Ground.
Color: Tan ONLY all other colors no longer available
Known to have been used on: Hurd patio doors, Park Vue, weather shield, Sierra pacific and many other wood and wood/clad sliding patio doors.
Return note: Reruns for only full length 94 5/8 inch parts. No returns accepted for samples or cut parts.
Product can not be rolled, ships straight via ups only
Associated Pars Sold Separately:
Part Number 526 Parting Stop - wood part that 511 snaps into
Part Number 513 Vinyl Side Stop weather strip Used along with 511
Part Number 527 Wood Side Stop that 513 snaps into
Part Number 505 Channel Weather strip
Part Number 513
Vinyl Side Stop Weather Strip for sliding patio doors
Length: 93 3/8 inch
Sample: If you order a Sample it will be approximately 2 inches long. If you selected sample you will receive a small cut pieces for color/fit reference only. No returns on samples
This usually ships via UPS Ground.
Color: Tan ONLY all other colors no longer available
Known to have been used on: Hurd patio doors, Park Vue, weather sheild, Sierra pacific and many other wood and wood/clad sliding patio doors.
Product can not be rolled, ships straight via ups only
Associated Pars Sold Separately:
Part Number 527 Wood Side Stop that 513 snaps into
Part Number 526 Parting Stop - wood part that 511 snaps into
Part Number 511 Vinyl Side or head Stop weather strip Used along with 513
Part Number 505 Channel Weather strip
W&F Upgrade Handle (All Brass) Is No Longer Available. Use replacement options below.
How to order replacement handle set - please read all instructions below, view pictures and watch our how to videos before you place your order!
Verify you have the "B" screw hole position on your W&F mounting plate (see picture and video below) If you find you have the "A" Screw Hole Click Here
Please watch videos below!
Parts to order:
1. Handle set:
Part Number S3006 Handle Set Center Latch for "B" Screw Hole Position. Your choice of function: Non keyed, Keyed or Dummy - see additional details for faction explanation.
2. Mortise Lock: Remove your mortise lock from your door to see what you have! The W&F handle set used a 90 degree cylinder which does not work with the S3006 handle set. You will need to replace the mortise lock box with a 45 degree cylinder mortise lock box. Depending on your door manufacture you need one of the following
# 518 Gray cylinder 45 degree
# S3007 45 Degree
#S3011 45 Degree
If your mortise lock box does not look like any of the above please email us picture's before you place your order so we can help you find the correct parts.
3. Binding Post Screw - as shown in the how to video the replacement handle set is not as long as the old W&F handle set you are replacing. You will have to fill the top screw hole that will be left over from the old handle set. Easiest solution to this is to use a Binding Post Screw.
Part# 546 - your choice of finish
Additional Info:
S3006 Handle Set Function Explanation:
Non-Keyed: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item.
Keyed: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door (see instructions that come with the handle set that is also pictured above). If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts)
Dummy: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Dummy Handle set DO NOT need new Mortise lock as there is no locking feature!
Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thickness which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version. See instructions that come with the handle set that is also pictured aboveNever use power tools when installing handle sets you run the risk of stripping out the screws.
Known Part Numbers On W&F Handle : P/N 120-50, PAT. # 5,092,114
Mounting Plate Known part Numbers: 011771, P/N 120-60; PAT. # 5,092,144
Part # 518
Replacement Door Mortise Lock for sliding Patio door Cylinder Color Style and Degree:
Gray Style= 45 Degree Cylinder with faceplate
Face Plate Over All Dimensions: 6 1/8" Long x 3/4" Wide
Face Plate Top and Bottom mounting Screw Holes Center To Center Dimensions: 5-3/8"
overall depth 1-5/32 inch
Black Style = 90 Degree Cylinder - will not come with faceplate customer will need to reuse their old one
See video below that shows differences between the 2 options. and instructions on how to reuse your old faceplate.
You must replace the mortise lock with the same version (you can usually determine this as the old cylinder where colored either Gray or Black. The angle of the Gray cylinder is at a 45 degree angle and the black is at a 90 degree angle) If you do not choose the correct one keyed cylinder will not fit/operate. If your Cylinder is silver or gold looking color you have the newer style determine which style you need by the slot degree inside the cylinder (see drawing for example the 45 degree cylinder)
Manufacturer: W&F
Known Manufacturing Brands Used on: Hurd, Peachtree, W&F *replacement and more
Similar Looking Products With Different Dimensions:
Part Number C1033
DISCOUTNED See part Number 546 for replacement option
524-003 Adams Rite Sliding Patio Door Handle Binding Post Screw
Manufacturer: Adams Rite
Discontinued Product. What we have in stock is all that is available. Sold as is no returns all sales final. Some parts are used but in good working order.
For replacement style binding post screws see part number 546
Part Number: 540-B; 41.13 Wingless
Secondary Patio Door Limiter Wingless Foot Bolt Sliding Patio Doors
Spring loaded and foot-operated, this sturdy device easily engages to provide a more secure door and easily releases to provide a ready means of escape. In fact, this patio door limiter has been tested to withstand a forced entry attempt of 400 lbs. of force.
Material: Acetal body, release lever and button. Cold-rolled steel bolt
Color: White or Bronze
Keeper Option:
20824 (in stock)
30680 (in stock)
30672 (NOT in stock special order)
Shim: Shim is ONLY needed for Hurd Brand all wood and wood clad Sliding Patio Doors
Recommended Screws: (Screws Not Include)
For 41.13 Door Limiter
WOOD: 4 #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: 4-#8 PHILLIPS, FLAT HEAD SCREWS
(LENGTHS AND THREAD TYPE TO BE DETERMINED BY PROFILE)
For Keeper 20824
WOOD: 2 #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
For Keeper 30680
WOOD: 2 #8 X 1.0 PHILLIPS, PAN HEAD, SHEET METAL SCREWS
PVC/METAL: 2 - #8 PHILLIPS, PAN H EAD SCREWS
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
For Keeper 30672
WOOD: 2 #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
Mounting: Mounts to bottom rail of sliding door and engages in sill, or into the face of the stationary door. See mounting positions “A” and “B”.Made in the U.S.A. Amesbury Truth
(Stamped on Back 45010, and 30680)
Click on picture to enlarge. Standard Binding Post Screw - Silver Mill Finish -$16.00 each. Fits in a 1/4" diameter whole. No other finishes available.UPGRADE Binding Post Screw - Chrome, Brass Dull Finish, Dark Bronze & 18-8 Stainless Steel $26 each. 1/4" Diameter. ***NOTE*** When using the Upgrade # 546U Binding post. The diameter is 1/4" so you will have to drill out the hole with a 5/16" drill bit for these binding post to fit.
Part Number: 558
Amesbury Truth - Gemini II PD Dual Action Mortise Lock With Recessed Trim Plate 2818 Series - 2 Point - For Sliding Patio Door
Keeper Sold Separately
Finish:
Standard (Stock)
Stainless Steel (Special order non stock no returns)
Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170
Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands.
The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame.
Product Highlights: Recommended for: aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application
Same Style Mortise Box with Different Face Plate
Part Number: C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock
Hoppe Multipoint Sliding Door Handles M151VK/2165N - Product Information page
Product Information page. We do not stock this at our warehouse. - Use links below to see pricing and to order - Available to Order via our parts catalog website
Handle Set Only See Associated parts sold Separately below
Style:
Active With Keyed Cylinder (comes in an exterior keyed lock cylinder and 2 keys)
Resista Brass F77-R - Model 850-2081959
Antique Brass F73* - Model 850-2081967
Brushed Chrome F41-R - Model 850-2081975
Polished Chrome F41-R - Model 850-2081983
Pure White F9010 - Model - 850-2081991
Matte Black F9714 - Model 850-2082003
Satin Nickel F42-R - Model 850-2082011
Antique Nickel F44-R* - Model 850-2082020
Oil Rubbed Bronze F79* - Model 850-2082038
Rustic Umber F8709 - Model 850-2083743
Active without Keyed Cylinder (will not be able to lock or unlock the door from the exterior)
Dummy (no locking capability used on secondary door panel)
Product Info:
Manual lock operation eliminates inadvertent locking of the door
Faceplate with radius at top and bottom available for simplified door edge preparation
90º turn lock for easy operation and a clear, visual indicator of locked/unlocked position
HLS 9000
Associated Parts Sold Separately
Hoppe Sliding Door Multi Point Gear 16mm Faceplate 30 mm Backset gear
Hoppe Sliding Door Multi Point Gear 16mm Faceplate 35 mm Backset gear
Hoppe Sliding Door Multi Point Gear 20mm Faceplate 30 mm Backset gear
Hoppe Sliding Door Multi Point Gear 20mm Faceplate 35 mm Backset gear
Hoppe Sliding Door Multi Point Strike 16mm
Hoppe Sliding Door Multi Point Strike 16mm with Bump Out
Hoppe Sliding Door Multi Point Strike 20mm with Bump Out
Hoppe Sliding Door Multi Point U Rail Strike 20mm
*Finish Properties
