Window Operating Control Device (WOCD) Window Safety

Part Number: SS20006  Window Operating Control Device Kit (WOCD)  50-2003 Series For Hung and Horizontal Sliding Vinyl Windows  Complies with the ASTM F2090-10You need 1 kit per window Either Left Hand Or Right hand- choose handing for Horizontal Slider. For a single Hung window you can use either a Right hand or Left hand Color: white, Almond (aka beige) and Clay see instructions in pictures  50-2003 Series Dual action WOCD designed to install directly to the face of the window jamb and interact with the active sash of any hung or sliding window. this device comes with mounting hardware to assure proper installation and is available  in right and left handing. This series was designed to be applied in the field or in the factory.  Kit Includes: Installation Instructions (also see pictures) Operating Instructions 1 WOCD (Your Choice of LH or RH) 8 Screws (4 Pair) 3 Shims Color: White, Almond (AKA Beige) and Clay Dual Action Window Opening Control Device is a must-have for any homeowner looking to enhance their windows with added safety and security. This device features a Right-Hand (RH) orientation and comes in a sleek blue and white color scheme to complement any interior or exterior decor. With dual action capabilities, this Window Opening Control Device allows for both restricted and full window opening, giving you peace of mind knowing your windows are always in control. Easy to install and durable in construction, this WOCD is the perfect addition to any home looking to upgrade their window safety features.

Read more less

Part Number: S1015 Residential SafeGard 2R - Current Style Amesbury Truth Residential SafeGard™ 2R  Operating Control Device (WOCD) For Casement Windows The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. .  This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B") ****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)**** Style:  We recommend to check with your window manufacture which style to purchase for your window. R2 Standard -Track (with black clip and red button):  8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep (For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was:  6 3/8" Long x 3/4" Wide X 1/4" Deep C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote.  Safeguard 2R Installation Instructions PDF  Ordering Instructions for SafeGard 2R: Residential Applications  1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required. 2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member 2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review. Includes: Arm Assembly, Track  Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application). Product Highlights Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements Avoids interference with operation or performance of a window Features and Benefits beyond ASTM F2090-21 Fully concealed unit after installation and window in closed position Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C) Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag All adjustments can be done inside the home after window is installed Pan head screw (SS) use for ease of handling Concealed arm after released from track Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge WOCD will automatically re-latch when window is fully closed Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application Safegard 2R Residential Application Info:   As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel.  PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device  ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement   The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal).   Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows Window Type Casement Window Material: Wood Composite  Vinyl Recommended Mounting Screws #8 Pan Head, length and screw type dependent on application Current Safegard 2 Video Below Old Style No Longer With Red Clip Video Below- this style is no longer available replacement  is the S1015

Read more less

Part Number: SS20012 Angle Vent Lock Mini Angel Window Fall Prevention  Sold Individually  Hung Routed Window Operated Control Device WOCD The Mini Angel is used on Vinyl, Aluminum and Fiberglass double and single hung sash windows. The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010 The Mini Angel is fitted into the stiles of the top sash - one on each side. The unit is primarily factory-fitted as access to the sash is required. however, provided the sash can be removed easily the Mini Angel is also suitable for us where the sashes have already been installed. The unit is clipped into the slot in the face of the top sash. the units are therefore tamper-proof. IMPORTANT: Window manufacturing and device fitting is subject to tolerances beyond our control. For this reason, it is the responsibility of the window manufacturer and/or installer to ensure that the correct product is specified and fitted. The installer must confirm that the device operates and resets correctly otherwise the safety features provided by this product will not work . If the device does not reset correctly it will not comply with ASTM F2090-2008, 2010 and 2017 regulations and will not be fit for purpose. Colors: White and Beige (aka Almond or Tan)   Stamped on Side of Part: MIGHTON PCT/GB09/1526 Used On SuperSeal Vinyl, Hurd Vinyl and Sierra Pacific Vinyl and other vinyl Single Hung windows For an aftermarket installation of WOCD see part number: SS20006  

Read more less

Part Number S1016  ASSA ABLOY Casement Window Operating Control Device WOCD KIT with Stickers!   Packed and Sold as Kit. Kit Contains:  One (1) 11.1mm Pin Strike One (1)  Latch ( Your choice of: Left Hand or Right Hand and 4 inch or 6 inch long) Four (4) mounting Screws One (1) Operational Sill Sticker One (1)  Indication Glass Sticker One (1) Installation Instructions. ASSA ABLOY Casement Window Operating Control Devise WOCD KIT The ultimate solution in residential window safety is now available with the connivance of an all-inclusive kit. Easy to fit with no routing required, m the ASSA ABLOY WOCD Kit is designed for use in windows with standard 11.1mm (7/16" hardware cavity). Features: 4 inch in stock ( 6 inch Lengths available for special order email for quote) Tested and compliant to ASTM F2090-13 Limits venting to less than 4" of opening Comparable with standard countersunk fixing Austenitic 304 stainless steel for enhanced corrosion resistance Convenience of all-inclusive bagging kit for ease of installation No fabrication required - cavity fitting   

Read more less

Part Number: S1014 Vent Lock -Window Operating Control Device (WOCD see code specification) Key Operated Vent Lock - Vent Lock With Key and Strike The new innovative VENTLOCK acts as a major deterrent to snatch thieves who spot what they consider is an easily opened window. Fitting is simple, just screw/insert it into the appropriate diameter drill hole. The special key which is supplied as part of the VENTLOCK system releases an inner barrel which prevents the window from being moved. The barrel revolves freely preventing it from being cut. The VENTLOCK is competitively priced against existing window locks. Each VENTLOCK includes a steel operation key and a brass strike plate for mounting on the lower sash check rail. MEETS: ASTM F 2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms Vent Lock with Key and StrikeMIGHTON  

Read more less

Part Number: 346 NOTE: Before you place your order review all information  below and review all drawings and compare to your windows. Angel Ventlock Face Fixed Single Action WOCD Window Operating Control Device  The Face Fix version is fitted into the stiles of the top sash - one on either side.  Styles: Sold as the following:  Kit Includes: 2 Lock Devises, 4 screws and 2 bumpers Replacement Lock Only Includes: 1 Lock Colors: White, Oil Rubbed Bronze, Satin Chrome, Chrome, Bright Brass (email for quote), Bronze, Satin Nickel, Black (not all colors are available in kit or lock only styles.)  The units are single action, so fitting two ensures compliance with ASTM F2090 2008 and 2010 The Unit is primary factory fitted as access to the sash is available prior to installation in the window frame. However, provided the sashes can be removed easily the Face Fixed version is also suitable for use where the sashes have already been installed two screws are used to fix each unit in place. Fixing is though h the front of the unit and into the sash. The face fix version is for use on Timer, Vinyl, Aluminum and fiberglass Sashes. If not factory installed into the sash you will have to mortise out the pocket in the sash for the WOCD to insert into. You will be responsible for determining if your sash can accept the WOCD. If unsure only order QTY 1 before ordering more. Returns: Only accepted for stock style size A Gap measurement of 1/8 inch to 5/32 inch. #346 must be in unused new WOCD See about us > Refund Policy for full return terms and conditions. No returns accepted for Bulk orders of QTY 25 of more or of the special order colors no matter the QTY.   Stamped on side of lock: VSP Patented For More Information on Angle Ventlocks Visit Manufactures Website: https://www.angel-ventlock.com/

Read more less

Part Number: 345 NOTE: Before you place your order review all information  below and review all drawings and compare to your windows. WOCD Standard Angel Ventlock Retrofit Window Opening Control Device Double Hung Windows This Standard Retro Angel Ventlock is another ideal limit control devise for use in aftermarket applications. This Window Opening Control Device (WOCD) is mounted to the top sash on a double hung wood window. The Standard Retrofit Angel Ventlock version fits into the style of the top sash and must be mounted to restrict the bottom sash open to less than four inches. These units are single action, so installing one on either side of the sash ensures compliance with the code ASTM F2090 - 2008 and 2010 Various Sizes and Finishes are Available. To determine what size you need by measuring the window gap between the top sash and bottom sash. Simply measure the distance between the two.  Colors: Blue White, Oil Rubbed Bronze (faux) and White Stocked Size WOCD # 345 is for a Window Gap of: 1/8 inch to 5/32 Inch Sash to Sash (see drawing A Dimension) For other gab sizes options see picture of chart and email us for a quote at Info@WindowPartsCenter.com Each Kit Includes:   Left Opening Control Device. Right Opening Control Device. 6x 5/8’ Wood Screws. install Instructions WOCD Complies with: ASTM F2090-17* (see instructions note WOCD was tested to and complies with the requirements of ASTM F2090, Versions 2008, 2010, 2013 and 2017) Which Angel WOCD Do I Need?: Angel WOCD devices only work with windows where the sash to Frame gap is fixed and cannot vary (the "A" dimension" see drawing) . If you are unable to determine the "A" Dimension of your window or  if this WOCD will work on your hung window or if it meets your local building code contact the window manufacture and your local building department for assistance on what WOCD you need for your window application. If unsure only order 1 kit to check fit before ordering more. Returns: Only accepted for stock style size A Gap measurement of 1/8 inch to 5/32 inch. #345 must be in unused new WOCD See about us > Refund Policy for full return terms and conditions. No returns accepted for Bulk orders of QTY 25 of more or of the special order sizing no matter the QTY.   Stamped on Back for part: Mighton PCT/GB09/1526 24/06/30 For More Information on Angle Ventlocks Visit Manufactures Website: https://www.angel-ventlock.com/

Read more less